Parts for Ge GFDS265EF0RR: Blower & Motor Parts

This motor bracket strap secures the motor to the appliance chassis, keeping the motor stable during operation to reduce vibration and ensure reliable performance. It's a simple replacement that restores proper motor mounting. What it does:

• Holds the motor firmly in place so the motor stays aligned during spin/cycle
• Helps reduce vibration and noise caused by a loose motor mount
• Maintains correct motor positioning for connected belts and pulleys
• Supports safe operation by preventing motor shift or contact with other components

• One motor bracket strap

• Disconnect power before starting any repairs to prevent shock or injury
• Check mounting hardware and replace any worn screws or fasteners as needed
• If the motor or mounting points are damaged, inspect and repair those components before installing the strap

A shield thermostat that monitors refrigerator temperature to help the cooling system run only when needed. Designed as a direct-replacement temperature sensor to restore reliable temperature feedback and stable cooling performance. What it does

• Senses cabinet/evaporator temperature and signals the control system to start or stop cooling cycles
• Helps prevent prolonged compressor runtime and temperature swings when working correctly
• Commonly replaced for intermittent cooling, inconsistent temperatures, or when the refrigerator won't reach set temperature
• Works as part of the appliance's temperature control system; not a standalone control board

• One shield thermostat

• Disconnect power before servicing to avoid electrical shock
• Located behind interior panels or near the evaporator; access may require removing shelves, panels, or the evaporator cover
• Handle the thermostat and capillary/sensor element carefully to avoid damage

The Motor Drive is an OEM replacement part for GE dryers. It is a crucial component that powers and controls the rotation of the dryer drum, enabling the tumbling action that facilitates the drying process.

Symptoms of a bad motor drive include:

• The dryer drum not rotating or spinning
• Loud grinding or squealing noises during operation
• The dryer not starting or failing to run a complete cycle
• Error codes or indicators related to the motor or drive system

Causes of a bad motor drive can range from electrical faults, such as failed capacitors or circuit board issues, to mechanical problems like worn bearings or seized components. Overheating or excessive strain on the motor can also contribute to drive failure.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The BLOWER WHEEL is an OEM part for GE electric dryers. It is housed within the blower motor housing and works to push air through the dryer ducting. During cycles, the rotating blower wheel creates crucial airflow that carries heated air through clothes to dry them efficiently.

Causes of a bad blower wheel can include cracked or broken wheel blades from normal wear and tear over time. Accumulations of lint on the wheel can also reduce airflow and efficiency.

Symptoms of a bad blower wheel include: 

• Insufficient or no air being pushed through the dryer ducting
• Abnormally long drying times and wet clothes after cycles  
• Excessive noise coming from the blower motor area
• Safety features possibly tripping due to motor overheating

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Maintain optimal airflow by replacing your blower wheel with this genuine OEM component.

A replacement steel hex nut used to secure threaded fasteners and small components on compatible appliances. Durable metal construction restores proper fastening to stop loose panels, trim, or assembly movement. What it does:

• Threads onto a matching stud or bolt to hold parts together securely
• Helps stop rattling, vibration, or loose hardware caused by a missing or worn nut
• Used where a standard hex nut is required for panels, brackets, or small assemblies
• Simple, low-profile fastener compatible with many common appliance mounting points

• Disconnect power to the appliance before beginning any repair.
• Install the nut by hand to avoid cross-threading, then tighten with an appropriate wrench; avoid overtightening.
• Match nut size and thread to the original stud/bolt before installation.
• Wear gloves and eye protection when working on sharp panels or metal parts.

This resilient mount clip cushions and isolates appliance components to reduce vibration and noise while keeping parts aligned during operation. It's a direct-fit mounting clip used where a rubberized isolator is required. What it does:

• Absorbs and dampens vibration between chassis and attached components to help reduce noise
• Holds motor, blower or assembly securely in place to prevent misalignment and wear
• Helps keep attached parts from transferring shock to the cabinet during operation
• Commonly replaced when you notice increased vibration, rattling or loose-mounted components

• Unplug the appliance and disconnect power before any repair
• Support the component being removed to prevent it from falling or shifting
• Use basic hand tools; avoid over-tightening fasteners that can compress the isolator
• Inspect surrounding mounts and hardware and replace if worn or damaged

Spring Idler restores tension to the dryer idler assembly so the drive belt stays seated for reliable tumbling. Replacing a worn or stretched spring helps eliminate belt slip, squealing, and intermittent or no-tumble dryer operation. What it does:

• Maintains proper tension on the dryer drive belt so the drum spins smoothly.
• Holds the idler pulley under load to prevent the belt from riding off the pulley.
• A worn or stretched spring can cause slipping, squealing, noisy operation, or a dryer that won't tumble.
• Use the correct OEM idler spring for proper fit and tension.

• Disconnect power (and gas, if applicable) before starting any repair.
• Relieve belt tension and note belt routing before removing the old spring to avoid reassembly errors.
• Springs are under tension—wear eye protection and keep hands clear of pinch points during removal/installation.
• Inspect the idler pulley and drive belt for wear; replace if damaged to ensure reliable operation.

This left-hand idler assembly maintains proper tension on the dryer drive belt so the drum turns smoothly and the belt tracks correctly, helping reduce squeals and slippage for reliable tumbling.

• Maintains correct tension on the dryer drum belt
• Guides the belt for smooth, low-friction tracking
• Helps prevent belt slippage or the belt coming off
• Common symptoms of a failing idler may include squealing/squeaking, burning rubber smell, drum not turning, or the belt coming off

• Disconnect power; turn off gas supply for gas dryers
• Access through the top/front panel
• Release belt tension, note routing, replace the idler assembly, and re-tension the belt
• Manually rotate the drum to verify smooth operation and proper belt alignment before test run

This right-hand dryer idler pulley assembly keeps the drive belt tight and aligned so the drum turns smoothly. Replacing a worn idler restores proper belt tracking and helps eliminate squealing or belt slippage. What it does:

• Mounts on the right-hand side to tension and guide the drive belt
• Maintains belt alignment across the motor and drum pulleys
• Supports smooth, consistent drum rotation
• Failure can cause squealing/chirping, belt slipping or fraying, a burning rubber smell, or a drum that won't turn

• One right-hand idler pulley assembly

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the belt path and idler by removing panels and lifting the drum as your model requires
• Relieve belt tension, replace the assembly, and route the belt per the model's diagram
• Hand-rotate the drum to verify belt tracking before reassembly and test run

This fan seal cushions and centers the fan on the motor shaft to reduce wobble and protect the motor and fan assembly from wear. It helps maintain smooth fan operation and can reduce vibration and noise when worn parts are replaced. What it does:

• Centers the fan on the motor shaft to prevent rubbing and uneven wear.
• Cushions the fan to reduce vibration and noise associated with a loose or damaged seal.
• Protects the motor shaft and fan bore from metal-on-metal contact.
• Common symptom: visible wear, fan wobble, scraping noise, or increased vibration.

• Designed for use on specified GE appliance fan/motor assemblies.
• Turn off and disconnect power to the appliance before attempting service.
• Inspect the fan and motor shaft for damage; replace worn components as needed for proper fit.
• If removal requires disassembly of panels or brackets, keep fasteners organized and follow OEM service steps.

The Thermostat is an OEM part for GE dryers. It monitors air temperatures inside the dryer drum during cycles to ensure they remain within a designated safe range. As a safety component, the thermostat automatically cuts power if temperatures get too high, protecting dryer components from damage.

Causes of a bad thermostat can include normal wear and tear over time from repeated heat cycles. Mineral buildup interference or electrical faults may also cause premature malfunction.

Symptoms of a faulty thermostat include:  

• Inability to properly heat or maintain consistent air temperatures
• Unexpected fluctuations outside of set temperature points   
• Issues fully completing designated drying cycles  
• Potential overheating errors or safety trips

This genuine OEM GE replacement thermostat restores accurate temperature monitoring and controls. Compatible with some Hotpoint, RCA, and Kenmore models as well, it improves performance reliability and safety once installed.

The Thermistor Outlet is an OEM part for GE dryers. As a temperature monitoring device, it senses air outlet temperatures exiting the dryer drum each cycle. The thermistor provides input to regulating components like the control board and heating elements. 

Causes of a faulty thermistor outlet can include normal wear over repeated uses and heat cycles. Mineral scale buildup may impact sensor accuracy as well. Electrical faults could also potentially disrupt functioning.

Symptoms of a bad thermistor outlet include:

• Improper or inconsistent drying times  
• Unexpected fluctuation of outlet air temperatures
• Issues activating or deactivating heating elements as needed
• Potential safety trips from inaccurate temperature readings

This OEM GE replacement ensures proper outlet temperature sensing once installed. Compatible with some Hotpoint, RCA, and Kenmore dryers as well.

Includes 12 screws.