Parts for Frigidaire FFGW2425QBC: Body Parts

Replacement oven rack for wall ovens. Provides a platform for organizing and baking food. Replace if warped, bent, or no longer sits securely on glides.

Two-piece broiler pan set for your range or wall oven. Includes vented insert and drip tray. Replace cracked, warped, or missing broiler pans.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This flue assembly directs hot gases and exhaust from the oven cavity to the rear or top vent, helping maintain proper oven temperatures and protecting nearby controls and cabinetry from excess heat. What it does

• Channels combustion or bake/broil exhaust away from the oven cavity to the external vent path
• Helps prevent excess heat buildup behind the control panel or in surrounding cabinetry
• Common symptom fix: reduces heat/odor or smoke coming into the control area or kitchen
• Supports consistent broiling and bake performance by maintaining proper exhaust flow

• One flue assembly

• Verify power (and gas for gas models) is disconnected and the appliance is cool before starting
• Installation may require removal of the oven back panel or range top; follow the appliance's service manual
• Handle edges carefully—part may have sharp metal edges

This shield is a replacement protective cover that helps guard internal components from debris and directs airflow where needed. It restores the appliance's intended protection and helps reduce noise and wear when the original shield is missing or damaged. What it does:

• Covers and protects internal parts from dust, food particles, and accidental contact
• Helps maintain proper airflow or component positioning
• Prevents rattling or vibration caused by a loose or broken cover
• Supports appliance longevity by restoring original component protection

• One replacement shield

• Disconnect power before beginning any repair to avoid shock or injury
• Installation typically requires basic hand tools; keep fasteners for reuse if undamaged
• Handle edges carefully — sheet-metal parts can be sharp
• Refer to your model's service manual or parts diagram for placement and fastener locations

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Replacement power cord for ovens and ranges. Installs at the rear panel to restore electrical connection. Needed when original cord is frayed or damaged.

Secures the oven bottom panel in place. Replace if screw is stripped, missing, or no longer holds the panel securely. Sold individually.

This is a decorative trim piece that attaches to the exterior of a range or oven, providing a finished appearance and covering seams or edges. It helps protect underlying components from moisture and debris while improving the appliance's overall look. Replace this trim if it is cracked, warped, discolored, or has broken off.

Replacement door trim for wall ovens. Installs around the oven door opening to provide a finished appearance. Order when original trim is cracked or worn.

Decorative trim piece for wall oven exterior. Replaces cracked, chipped, or missing trim that affects the finished appearance of your oven installation.

Decorative trim piece for wall ovens. Installs around the outer frame to cover gaps and provide a finished look. Replace when cracked, chipped, or missing.

Heat shield for ranges and wall ovens. Protects internal components from excessive heat. Replace if cracked, warped, or damaged to prevent overheating.

Receptacle for electric and gas ranges and wall ovens. Installs as a connector component. Replace if cracked, damaged, or missing to restore proper fit.

This is the door lock motor and switch assembly used in wall ovens and ranges to engage and disengage the door lock during the self-clean cycle. The motor drives the latch mechanism while the integrated switches signal the control board whether the door is locked or unlocked. Replace this assembly if the oven will not start the self-clean cycle, the door fails to lock or unlock, or you receive an error code related to the door lock.

Decorative trim panel for wall ovens. Covers gaps between oven and cabinet cutout. Replace if cracked, discolored, or missing for a finished look.

Decorative trim piece for wall oven edges and openings. Replace if cracked, chipped, discolored, or missing to restore clean finished appearance.

Oven not heating evenly or making noise? This convection fan motor assembly restores proper air circulation. Direct-fit replacement for wall and range ovens.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

Replacement trim for wall ovens. Installs around the oven cavity to provide a finished edge. Order a new trim if yours is cracked, chipped, or worn.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

This is a metal mounting bracket used to secure an over-the-range microwave to the wall or cabinet during installation. It provides structural support and helps keep the microwave properly aligned and stable. Replace this bracket if it is bent, broken, or missing, which can cause the microwave to sit unevenly or become unsafe.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.