Parts for Ge GNSH45E04: 01 - Body Parts

Leaking from the top or bypass valve? This o-ring seal kit stops drips at your water softener's control valve and plumbing connections. DIY repair kit.

20-foot overflow drain hose for water softeners and filtration systems. Replace this hose if your original is cracked, kinked, worn, or leaking.

Replace the distributor top cap on your water softener system. This plastic component covers the distributor assembly and may need replacement if cracked or worn.

Replacement distributor bottom for water softener systems. Installs at base of distributor assembly. Replace if cracked, damaged, or leaking during cycle.

Water softener resin removes hard minerals from your water. Replace when water feels hard or shows white buildup. Verify compatibility with your model.

Replacement faceplate for water filtration systems. Covers and protects control buttons and display. Restores appearance when original is cracked or worn.

This electronic oven control replaces the main user interface and control module that manages bake/ broil cycles, timers, and the display so your range heats and responds correctly. It restores oven control functions when the original control fails. What it does:

• Receives user inputs (buttons/knobs) and runs bake, broil, timer and clock functions
• Regulates oven heating cycles by controlling relays or solid-state outputs to the bake/broil elements
• Drives the control display and indicator lights so status and error codes are visible
• Common symptoms: oven not heating, display blank or erratic, touchpad/buttons not responding, or control not executing selected cycles

• One electronic oven control module

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the board carefully to avoid ESD damage; avoid touching components or connector pins
• Verify connectors and wiring harness orientation before reconnecting; replace if damaged

Filter screen for water filtration systems. Replace when water flow decreases or debris accumulates to maintain filtration efficiency. Verify fit with your model.

Fix an overheating or non-functioning water softener with this transformer and power cord assembly. Direct replacement restores electrical power to your unit.

Seals the salt reservoir opening to prevent leaks and contamination. Replace if cracked, loose, or missing to maintain proper salt containment. Confirm fit with your model number.

Seal vapor barrier for water softeners prevents moisture damage to internal components. Replace if you notice leaks or corrosion. Confirm fit with your model.

Replacement rim for water softener brine tanks. Secures the tank lid and provides structural support. Order a new rim if yours is cracked or broken.

Replacement brine well cover with decal for water softeners. Secures the top of the brine well tank. Replace if cracked, broken, or missing decal.

Secure your water softener's brine tank with this screw kit. Replace when screws are corroded, stripped, or missing to ensure proper tank stability.

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Water softener not drawing brine after cleaning the venturi? A faulty brine valve assembly is the likely cause. This part controls the brine flow cycle.

Fix water softener overflow or failure to regenerate with this float stem and guide assembly. Controls water level during regeneration cycles. DIY repair.

The GE clip is an OEM replacement part responsible for securely holding the water filter in place within the appliance. Its primary function is to ensure a tight and stable fit of the water filter, preventing any potential leaks or misalignments during the appliance's operation. 

Common causes of a bad clip can include regular wear and tear, accidental impact, or corrosion.

This part fixes the following symptoms:

• The water filter not staying in place or coming loose
• Leaks or drips around the water filter area
• Difficulty in inserting or removing the water filter
• Reduced water flow or dispensing issues from the appliance
• Visible damage or wear to the clip

The GE clip can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Fix poor water quality or incomplete regeneration cycles in your water softener. This brine valve assembly restores proper brine flow. Moderate DIY repair.

Fix poor water quality or incomplete regeneration cycles in your water softener. This brine valve assembly restores proper brine flow. Moderate DIY repair.

Fix poor water quality or incomplete regeneration cycles in your water softener. This brine valve assembly restores proper brine flow. Moderate DIY repair.

Replacement spacer for water filtration systems. Installs between filter housing components to ensure proper alignment and seal. Order if cracked or missing.

Secures tank neck connection on water softeners. Replace if leaking, loose, or corroded to prevent water damage. Verify compatibility with your model.

Secures tank neck connection on water softeners. Replace if leaking, loose, or corroded to prevent water damage. Verify compatibility with your model.

Fix water softener sensor errors or no regeneration cycles with this wire harness sensor assembly. Direct fit part restores proper system monitoring.