Parts for Ge GXSF40H03: 01 - Body Parts

Keep leaks at bay. This O-ring Seal Kit restores the watertight connections in your water softener's control and bypass assemblies, helping stop drips and maintain proper system pressure after age, wear, or servicing.

• Maintains a tight, leak-free seal at control valve, bypass, and plumbing connection points
• Replaces flattened, cracked, or nicked O-rings that can cause seepage or drips
• Helps preserve system pressure and prevent standing water or corrosion inside the cabinet
• Useful after valve/head service when original seals no longer seat properly

• Unplug the unit, shut off the water supply, and place the softener in bypass to relieve pressure
• Open a nearby cold-water faucet to depressurize; have towels ready
• Clean grooves and mating surfaces; install new O-rings lightly coated with food-grade silicone lubricant (avoid petroleum-based products)
• Reassemble, restore water slowly, and check all joints for leaks

This replacement faceplate restores the appearance and user interface trim for your appliance's control area, protecting buttons and display while keeping the control panel tidy and functional. Ideal for repairing cosmetic damage or wear. What it does:

• Covers and protects the control buttons and display from spills, grease, and everyday wear
• Keeps button alignment and spacing consistent for reliable user input
• Helps restore the appliance's finished look after damage or discoloration
• Works with the existing control assembly and buttons to maintain normal operation

• One faceplate

• High-level replacement: generally snaps or screws into the control console; retain screws and clips from the original part
• Disconnect power before removing the old faceplate and accessing the control area to avoid shock or damage
• Handle carefully to avoid scratching the finished surface during installation

This part is a control timer for a water softener. The control timer on a water softener is responsible for regeneration at a specific time each day. If the water softener is not running at its scheduled times, this could mean that the control timer has gone bad and needs to be replaced. If there isn't enough water in the tank or, conversely, if there is too much water in the tank, this can also be a result of a bad control timer. It's important to run diagnostics to determine exactly what the problem is. Unplug the water softener from its power source before doing any diagnostics to determine what is causing the problems that the user is experiencing.This control timer is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. This part is compatible with water softeners that are manufactured by the GE brand.

This cover seals the dishwasher salt filler hole to keep water softener salt contained and reduce leaks or salt contamination in the tub. It restores a proper seal for the salt reservoir opening. What it does

• Covers and seals the dishwasher salt filler hole to help prevent salt granules from spilling into the wash tub.
• Helps limit salt and water leakage from the softener/salt reservoir area.
• Can reduce symptoms related to salt contamination such as visible salt deposits or unexpected residue in the tub.
• Simple replacement that restores the original closure for the salt fill port.

• Turn off power to the appliance before accessing the salt filler area.
• Remove lower racks or panels as needed to reach the salt fill; refer to your owner's manual for guidance.
• Inspect the fill neck and surrounding seals for damage; replace damaged seals as needed.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

The GE clip is an OEM replacement part responsible for securely holding the water filter in place within the appliance. Its primary function is to ensure a tight and stable fit of the water filter, preventing any potential leaks or misalignments during the appliance's operation. 

Common causes of a bad clip can include regular wear and tear, accidental impact, or corrosion.

This part fixes the following symptoms:

• The water filter not staying in place or coming loose
• Leaks or drips around the water filter area
• Difficulty in inserting or removing the water filter
• Reduced water flow or dispensing issues from the appliance
• Visible damage or wear to the clip

The GE clip can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.