Parts for Ge GXSH45V00: 01 - Body Parts

Keep leaks at bay. This O-ring Seal Kit restores the watertight connections in your water softener's control and bypass assemblies, helping stop drips and maintain proper system pressure after age, wear, or servicing.

• Maintains a tight, leak-free seal at control valve, bypass, and plumbing connection points
• Replaces flattened, cracked, or nicked O-rings that can cause seepage or drips
• Helps preserve system pressure and prevent standing water or corrosion inside the cabinet
• Useful after valve/head service when original seals no longer seat properly

• Unplug the unit, shut off the water supply, and place the softener in bypass to relieve pressure
• Open a nearby cold-water faucet to depressurize; have towels ready
• Clean grooves and mating surfaces; install new O-rings lightly coated with food-grade silicone lubricant (avoid petroleum-based products)
• Reassemble, restore water slowly, and check all joints for leaks

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This overflow adapter kit helps route excess water away from the appliance to reduce the chance of spills and surface damage. It replaces a worn or missing adapter to restore correct overflow drainage. What it does:

• Connects the overflow outlet to the drain path so excess water is carried away safely.
• Helps stop water from pooling inside or beneath the appliance, reducing leak symptoms.
• Restores a proper seal and fit where a damaged adapter allowed unwanted discharge.
• Works as a direct-fit replacement for the OEM overflow connection to ensure reliable flow.

• Turn off power and shut off the water supply before beginning any work.
• Basic hand tools may be needed; inspect gaskets and hoses for wear and replace if necessary.
• Verify proper fit and secure connections to prevent leaks; test with a short water cycle.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.

This brine valve assembly is the replacement valve used in compatible GE integrated water/softener systems to control brine flow during regeneration cycles. Restores proper brine delivery so the system can clean and recharge resin for consistent water quality. What it does

• Directs brine solution flow during the softener regeneration cycle to flush and recharge the resin bed.
• Ensures correct timing and sealing of brine flow to prevent incomplete regeneration.
• Commonly replaces a failed or leaking valve to stop brine leaks or regeneration issues.
• May help address symptoms such as weak softening performance, visible leaks, or frequent/noisy regeneration cycles.

• One brine valve assembly

• Disconnect power and shut off water supply before servicing; follow all safety precautions.
• Replace only with the exact part number to ensure fit and function.
• Inspect nearby fittings and tubing for wear and replace if damaged; check for leaks after installation.