Parts for Kenmore 790.45082510 (79045082510, 790 45082510): Body Parts

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

A lower heat shield that protects nearby components from excess heat and helps maintain safe operation. Fits where a metal shield is required beneath heating elements or burners to deflect heat and reduce heat transfer. What it does:

• Protects surrounding parts and insulation from direct heat exposure
• Helps prevent heat-related damage to wiring, panels, and hoses
• Maintains safer operating temperatures around the heating assembly
• Can reduce heat transfer that may cause discoloration or premature wear

• High-level replacement only; refer to your model's service manual or parts diagram for exact location and fastener details
• Power/gas must be turned off and appliance fully cooled before beginning any work
• Use appropriate tools and retain all screws/fasteners; replace any damaged fasteners with OEM-specified parts

This heat shield is a sheet-metal protector that blocks and redirects oven or broiler heat to protect nearby components and cabinet surfaces. It helps prevent heat damage and keeps the oven's internal parts functioning safely. What it does:

• Shields wiring, insulation, and adjacent parts from direct broil/upper-oven heat
• Helps maintain proper airflow around oven components to reduce hot spots
• Reduces risk of heat-related component failure and discoloration of surrounding surfaces
• Commonly used behind the broil element or on the oven cavity wall where heat exposure is highest

• One oven heat shield

• Disconnect power (or unplug) and shut off gas supply before servicing
• Wear gloves and eye protection; sheet metal edges can be sharp
• Remove oven racks and any panels indicated to access the shield
• Reinstall fasteners snugly; do not overtighten. Test oven function after reassembly

Fix F10 or F30 error codes and inaccurate oven temperatures with this internal temperature sensor. Monitors heat levels for consistent cooking.

Replacement door spacer for wall ovens. Maintains proper clearance between door components. Replace if cracked, worn, or missing to restore door fit.

Receptacle for electric and gas ranges and wall ovens. Installs as a connector component. Replace if cracked, damaged, or missing to restore proper fit.

White plastic end cap for oven control panel. Covers the exposed edge of the control console for a finished look. Replace if cracked, broken, or missing.

Support bracket that secures and guides your oven rack for smooth sliding. Replaces cracked, bent, or missing guides that cause racks to catch or tilt.

This replacement oven bottom panel restores the lower interior surface of the oven cavity, covering insulation and providing a durable surface for the bake area. It helps maintain proper airflow and protects internal components from spills and debris. What it does:

• Covers and protects the oven's lower cavity, shielding insulation and components from spills and food debris
• Helps direct heat and air flow across the oven floor for more consistent baking
• Replaces panels that are rusted, warped, dented, cracked, or missing
• Reduces risk of debris falling into lower compartments that can cause smoking or burning odors

• One oven bottom panel

• Disconnect power to the appliance before starting any repair to avoid shock hazard
• Remove oven racks and any mounting screws or clips securing the old panel; save hardware
• Handle edges carefully—metal panels can be sharp; wear gloves and eye protection

This 10-16 x 1-1/4 screw secures appliance panels and components, restoring proper fit and preventing loose parts. Use it when fasteners are missing, stripped, or causing rattle and misalignment. What it does:

• Fastens trim, brackets, or interior panels to restore secure attachment
• Stops rattling or vibration caused by loose hardware
• Replaces missing or damaged screws to maintain safe operation
• Matches OEM thread and length for correct fit in specified locations

• Disconnect power and empty appliance as needed before servicing
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until parts seat to prevent striping or cracking
• Replace all matching screws for consistent fit

This part has been discontinued by the manufacturer and is no longer available.

Mounting screw for ranges, ovens, and cooktops. Secures panels, brackets, or internal components. Replace if missing, stripped, or damaged.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation