Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Ge JGBS61DP4BB: Body Parts

Parts for Ge JGBS61DP4BB: Body Parts

Location on Diagram
Part Description
Price & Availability
19
By: Ge
Part Number: WD01X10333

This wire tie secures and organizes wiring inside the appliance to help prevent chafing and loose connections. Its 7-7/8 inch length is suited for bundling harnesses and routing cables away from heat and moving parts. What it does:

  • Fastens and groups wires or small hoses to keep them neatly routed
  • Helps prevent wire chafing, abrasion, and contact with sharp edges
  • Reduces the chance of intermittent connections from loose wiring
  • Keeps wiring away from moving components to reduce noise and wear
What's included: One 7-7/8 in wire tie Install notes:
  • Disconnect power before servicing the appliance
  • Position wiring as needed, insert tie and tighten; avoid over-tightening
  • Trim excess tie length flush and secure cut end away from wires
  • Replace any damaged wiring insulation and verify routing before restoring power

More
$8.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
37
By: Ge
Part Number: WB34X24753

This cover ignitor protects the oven or range ignitor assembly and helps keep the ignitor clear of drips and debris for reliable ignition. It's a simple replacement that restores the ignitor's protective shield. What it does

  • Protects the ignitor element from spills, grease, and debris that can interfere with ignition
  • Helps maintain consistent ignition by shielding the ignitor from direct contact
  • Commonly used when the original cover is cracked, warped, or missing
  • Can resolve ignition issues caused by physical damage or buildup on the ignitor area
What's included
  • One cover ignitor
Install notes
  • Disconnect power (and gas supply on gas appliances) before starting any repair
  • Handle the ignitor assembly carefully; avoid touching the ceramic or ignitor tip
  • Use basic hand tools; ensure the cover seats properly without forcing or cracking it
  • After installation, restore power/gas and test the burner or oven according to the appliance manual

More
$9.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
43
Best Seller
Product photo
5.0 (16)
By: Ge
Part Number: WB20K10015

Oven not reaching or maintaining temperature? A faulty temperature sensor often causes inaccurate heating. Moderate DIY repair with video guidance.

More
$47.62

IN STOCK
Ships Today Guaranteed
Add to Cart
81
By: Ge
Part Number: WB02X24941

This rangetop holder secures the cooktop/rangetop assembly to the range frame, helping keep the surface stable and properly aligned for safe cooking. Durable replacement for worn or missing mounting hardware. What it does:

  • Secures the rangetop/cooktop to the range body to prevent movement or rocking
  • Keeps the cooktop flush and aligned for consistent burner operation
  • Helps eliminate rattling or vibration caused by a loose mount
  • Often replaced when the holder is bent, broken, or missing
What's included: One rangetop holder. Install notes:
  • Disconnect power (and turn off gas if applicable) before starting work
  • Basic hand tools required; follow OEM disassembly steps for access
  • Inspect surrounding mounting points and hardware; replace any damaged fasteners
  • Do not overtighten mounting screws; secure snugly to avoid stress on the bracket

More
$10.06

IN STOCK
Ships Today Guaranteed
Add to Cart
82
By: Ge
Part Number: WB02X24942

This rangetop holder is a small support bracket that secures the cooktop/rangetop assembly and helps keep burners and trim properly aligned for safe, even cooking. It replaces a worn or damaged holder to restore stable cooktop support. What it does:

  • Supports and stabilizes the rangetop/cooktop assembly to prevent shifting or sagging
  • Keeps burner components and trim aligned for proper burner placement and operation
  • Helps eliminate rattling or movement under normal use
  • Addresses symptoms such as a loose or misaligned cooktop, noisy operation, or uneven burner spacing
What's included:
  • One rangetop holder support bracket
Install notes:
  • Disconnect power and gas supply before beginning any repair
  • Remove cooktop trim or grates as needed to access the holder; hand tools such as screwdrivers may be required
  • Handle edges carefully to avoid cuts and protect finished surfaces from scratches
  • Test fit and reassemble components to ensure proper alignment before restoring power/gas

More
$10.06

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
90
Product photo
5.0 (1)
By: Ge
Part Number: WB02X28738

Replacement front frame bumper that cushions and supports your range's door trim. Prevents metal-on-metal contact and reduces vibration. Needed when original is cracked, broken, or missing.

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
92
Product photo
By: Ge
Part Number: WB1X1261

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

More
$9.88

IN STOCK
Ships Today Guaranteed
Add to Cart
134
By: Ge
Part Number: WB02X37585
$10.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
135
By: Ge
Part Number: WB02X37586
$10.76

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
200
Best Seller
Product photo
5.0 (4)
By: Ge
Part Number: WB48X20249

Replace your worn, bent, or warped oven rack. Provides a stable surface for baking sheets and pans inside your range oven. Fits standard ovens.

More
$78.39

IN STOCK
Ships Today Guaranteed
Add to Cart
203
Product photo
5.0 (3)
By: Ge
Part Number: WB18K10036

Replacement power cord for gas ranges. Connects your unit to the wall outlet. Replace if cord is worn, cut, heat-damaged, or causing burning smells.

More
$29.95

IN STOCK
Ships Today Guaranteed
Add to Cart
204
Product photo
5.0 (3)
By: Ge
Part Number: WB1K5062

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

More
$9.88

IN STOCK
Ships Today Guaranteed
Add to Cart
206
Product photo
5.0 (1)
By: Ge
Part Number: WB01K10091

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

More
$19.40

IN STOCK
Ships Today Guaranteed
Add to Cart
207
Product photo
By: Ge
Part Number: WB2K36

Secures your range power cord at cabinet entry to prevent wire damage and disconnection. Replace if cord is loose or clamp is cracked. Confirm fit with your model number.

More
$4.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
208
By: Ge
Part Number: WB63X20207
$83.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
209
By: Ge
Part Number: WB56X46209
$57.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
210
Best Seller
Product photo
5.0 (28)
By: Ge
Part Number: WB35X37973

Replaces cracked, rusted, or corroded oven bottom pan and heat deflector. Installs in the base of your range oven cavity. Simple 2-screw removal.

More
$96.55

IN STOCK
Ships Today Guaranteed
Add to Cart
220
Product photo
By: Ge
Part Number: WB2K8
$8.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
225
By: Ge
Part Number: WB34K2
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

228
By: Ge
Part Number: WB02X7066
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

229
By: Ge
Part Number: WB25X50907
$7.52

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
230
By: Ge
Part Number: WB25X50906
$7.52

IN STOCK
Ships Today Guaranteed
Add to Cart
231
Product photo
5.0 (4)
By: Ge
Part Number: WB02K10254

Safety bracket that anchors your range to the floor or wall, preventing tip-over. Replace if missing, damaged, or cracked to secure the appliance.

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
235
By: Ge
Part Number: WB25X50908

This oven lamp assembly replaces a failed or damaged interior light so you can safely check cooking progress without opening the door. It installs in the oven cavity and restores interior illumination. What it does:

  • Provides internal oven lighting so you can see food and monitor cooking without opening the door.
  • Replaces cracked, broken, or non-functioning lamp housings and sockets.
  • Helps eliminate intermittent or no-light conditions caused by a damaged light assembly.
  • Fits into the oven cavity and connects to the oven's existing light wiring and mounting points.
What's included: One oven lamp assembly. Install notes:
  • Disconnect power to the appliance before starting any repair to avoid shock hazard.
  • Allow the oven to cool completely before accessing the lamp area; lamp and housing may be hot.
  • Handle glass parts and bulbs carefully to avoid breakage and injury.
  • Basic hand tools (screwdriver) are typically required; follow OEM instructions for removal and installation.

More
$8.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
241
By: Ge
Part Number: WB63X28662
$35.36

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
242
By: Ge
Part Number: WB63K5
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

243
Product photo
By: Ge
Part Number: WB63X20215

Support base for electric and gas ranges. Installs at the bottom to provide structural stability. Replace if cracked, broken, or damaged over time.

More
$30.77

IN STOCK
Ships Today Guaranteed
Add to Cart
244
Product photo
By: Ge
Part Number: WB63X20216

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

  • The oven or range rocking or becoming unlevel during use  
  • Noisy or squeaking sounds coming from the base
  • Visible cracks or weaknesses in the material
  • The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

More
$29.77

IN STOCK
Ships Today Guaranteed
Add to Cart
245
Best Seller
Product photo
5.0 (4)
By: Ge
Part Number: WB02K10182

Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.

More
$12.47

IN STOCK
Ships Today Guaranteed
Add to Cart
251
Product photo
By: Ge
Part Number: WB2K3

Metal angle support bracket that secures interior panels, shelves, or trim inside your range. Replace if cracked, bent, or missing to maintain proper alignment.

More
$6.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
256
By: Ge
Part Number: WB32K1
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

257
By: Ge
Part Number: WB38K10008
$22.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
258
By: Ge
Part Number: WB38K2

A replacement vent brace that secures the appliance vent assembly and helps keep vent components aligned for steady airflow and quiet operation. Restores proper support to a loose or sagging vent assembly. What it does:

  • Supports and stabilizes the vent/duct assembly so it stays aligned during use
  • Reduces vibration and rattling caused by a loose vent bracket
  • Helps maintain proper airflow by keeping vent components in the correct position
  • Fits where the original vent brace mounts to the appliance frame
What's included: One vent brace Install notes:
  • Disconnect power (and gas, if applicable) before servicing the appliance
  • Remove the appropriate access panels to reach the vent area; keep fasteners for reassembly
  • Verify bracket orientation and screw locations match the original before tightening

More
$9.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
260
Product photo
By: Ge
Part Number: WB32K2

Cushions your range oven door perimeter to prevent metal contact and reduce heat loss. Replace when worn, compressed, or door closes harshly. Confirm fit.

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
262
Product photo
By: Ge
Part Number: WB35K16

Thermal insulation pad that installs behind the oven cavity. Replace if cracked, deteriorated, or missing to restore heat protection for rear components.

More
$57.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
283
By: Ge
Part Number: WB02X21679

Wire clip secures electrical connections to heating elements in ranges. Replace if worn, cracked, or loose to restore proper contact. Verify fit with model.

More
$5.15

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
290
By: Ge
Part Number: WB34K12

Metal radiation shield that mounts inside your range to protect internal components from heat. Replace if cracked, bent, or dislodged during service.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

420
By: Ge
Part Number: WB34K16
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

713
By: Ge
Part Number: WB39K33

Support plate for gas range burners. Mounts beneath burner assembly to provide stable base. Replace if cracked, warped, or missing to restore proper fit.

More
$4.93

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
752
Product photo
By: Ge
Part Number: WZ4X345D

Package of 12

More
$21.95

IN STOCK
Ships Today Guaranteed
Add to Cart
788
By: Ge
Part Number: WB34X21575
$22.01

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
1330
Product photo
By: Ge
Part Number: WB10X20220

Oven door won't close properly or seal tight? This hinge receiver bracket anchors the door hinge arm to the frame, ensuring proper alignment and seal.

More
$9.95

IN STOCK
Ships Today Guaranteed
Add to Cart
1331
Product photo
By: Ge
Part Number: WB1K53

Mounting screw that secures the hinge assembly on electric and gas ranges. Replace this fastener if the original is stripped, missing, or damaged.

More
$8.80

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google