Bolens Lawn Mower Parts

This .498 x 1.64-inch wheel shoulder bolt is a genuine OEM part sourced directly from the manufacturer. It is made for use on lawnmowers, edgers, and tillers to fasten the wheel to the frame. Shoulder bolts have three sections: the visible head, an unthreaded section called the shoulder, and the threaded section for locking it in place. The shoulder or unthreaded area allows the wheel to rotate. This shoulder bolt will have a spring washer installed before the wheel is installed. A locking nut is used on the opposite side to ensure the wheel is secure.If the lawnmower wheel or other equipment wheel needs to be replaced or the shoulder bolt becomes rusted, causing friction when pushing the mower, this replacement part is easy to install. First, the nut holding the shoulder bolt and wheel in place is removed with a wrench. The shoulder bolt is then pulled out from the opposite side. Install the new shoulder bolt, followed by the remaining wheel parts. Reinstall the nut to hold the wheel in place.The shoulder bolt is made of high-tensile metal to withstand the friction and weight of the moving machinery. It is designed for use with Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut lawn mowers, tillers, and edgers. It is sold individually.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.

This replacement part is a seat. It is a genuine replacement part made by MTD. This seat has a low back and is intended for use specifically for riding lawnmowers. This seat is able to support the user while they are operating the machine so that they are comfortable and upright during use.A new seat might be needed if the current one is damaged or missing. It is common for the seat to become worn down over time and lose support. If this is the case, the user might choose to replace it. It is also common that the seat becomes damaged such as being torn or ripped. This can cause the seat to not be as effective.This replacement seat is sold individually. This part is a genuine OEM replacement part sourced directly from the manufacturer.

This adjustment assembly is a genuine MTD part. It is intended for use with walk-behind mowers, riding lawn mowers, mulching mowers, and other similar machines made by an array of manufacturers. The adjustment assembly allows the user to adjust the height of the mower by adjusting the wheels.Replacing the adjustment assembly is not a very common repair, however it can be more common for mowers used for commercial purposes, since they will be adjusted much more frequently. It can also become damaged in an accident or by particularly rough terrain.This adjustment assembly is a genuine OEM part sourced directly from the manufacturer and is sold individually. It is compatible with machines made by Bolens, Huskee, Husky, Mastercut, MTD, Platinum, White Outdoor, Yard Machines, and Yard-Man.

This replacement part is an adjuster assembly intended for use in lawn mowers. This adjuster assembly allows the user to control the height of the mower's blades, which will adjust the depth of a cut.An adjuster assembly may become stripped or worn down over time, necessitating replacement.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a handle bracket assembly. This is a genuine replacement part made by MTD. Brackets are used to connect two pieces together and ensure that they are secure during use. A new handle bracket assembly might be needed if the current one is unable to properly stay attached in any way. This can be due to damage over time and should be replaced if this is the case. The bracket assembly might have become stripped due to normal wear and tear. Be sure to refer to the proper use guide for more information on how to install this part efficiently and correctly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.