Bolens Lawn Mower Parts

This is a front steering gear assembly that is used in the construction of many models of lawnmowers. It is made of metal and links the drag links with the steering shaft pinion. This creates the ability for the drag links to turn the front wheels when a user turns the steering shaft. The front steering gear is an integral part of the steering assembly and any damage to the component will require replacing it.If the front steering gear assembly is broken or damaged, a replacement will require a socket set. The main symptom of a malfunctioning or faulty gear assembly is the inability to steer the lawnmower. Put the lawnmower on a stable surface and remove the spark plug wire. The steering assembly will need to be removed from the lawnmower to access the front steering gear. Disassemble the tool to reach the gear and remove it from the equipment. Replace with a new part and reassemble other components.This is an authentic OEM replacement component that is directly sourced from the manufacturer. The front steering gear assembly is sold as a single item. It is made for use with lawn mowers manufactured by MasterCut, Craftsman, Yard-Man, Troy-Bilt, Bolens, Murray, Huskee, Yard Machines, and MTD.

This part is a replacement rim assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, cracked, or otherwise defective rim assembly in lawn tractors.The rim is what seals the tire and helps to support it. If the rim becomes dented, cracked, or broken in anyway, the tire may deflate, or the wheel will not function properly. Rims are subject to significant wear and tear, particularly if the equipment is used on rough terrain or comes into contact with a hard object such as a curb. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this rim, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This rim assembly can be used with lawn tractor models that have been manufactured by MTD, Yard Machines, Bolens, Troy-Bilt, Yard Man, and Husky. Sold individually.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

This replacement part is a torsion spring. This is a genuine replacement part made by MTD. Torsion springs ensure that the engine is able to work properly and effectively using the torque provided by this part. A new torsion spring might be needed if the current one is missing or damaged in any way. Springs can become brittle under pressure and snap after years of use. Be sure to replace this spring as soon as possible if this is the case. Work gloves are recommended as this part can be dangerous and cause injury if handled improperly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement shoulder screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current shoulder screw is defective or lost, this part can be used as a replacement. It is intended for use with outdoor power equipment, although this particular screw is primarily used with lawn mowers.Screws are a standard piece of hardware intended to secure together components to keep them in place. Over time, screws are subject to stripping, corroding, or becoming detached, and this may require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this shoulder screw, the appropriate owner's manual and equipment diagrams should be referred to. This shoulder screw is suitable for use on outdoor power equipment and lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This bearing spacer is a genuine MTD part, sold individually. This bearing spacer can be used as a replacement part for a lawn mower. The purpose of a bearing spacer is to line up the bearings of the wheels while situated on the axle of the wheel in between the two bearings.The bearing spacer might have to be replaced at some point within the standard lifespan of a lawn mower if it can no longer separate the bearings from one another. The bearing spacer might suffer damage in the form of stripping, puncturing, tearing, or eroding from general wear and tear, or the component might be lost or misplaced. If this occurs, the bearing spacer should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bearing spacer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Bolens, and Yard-Man.

This is a replacement handle. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken, detached, or defective handle on various lawn mower models.A broken or detached handle can make operating and handling a lawnmower difficult and potentially dangerous. Over time, handles can become subject to significant amounts of wear and tear which can cause them to loosen or break. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this handle, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this handle is suitable for use on several different models of lawnmowers manufactured by MTD and Craftsman. This part may fit equipment made by other manufacturers. For proper accuracy when checking a part, please check the specific model number. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This baffle is a genuine MTD part. It is made for use with walk-behind and self-propelled lawnmowers. It is a rear mulching baffle, which means that it aids in mulching lawn clippings, cutting them down into very small pieces. These clippings can either be disposed of, composted, or used as fertilizer.This mulching baffle is a genuine OEM part sourced directly from the manufacturer and is sold individually. Most mowers have more than one baffle, so be sure to check if others also need to be replaced.This baffle is manufactured for compatibility with lawnmowers made by Bolens, Columbia, MTD Pro, White Outdoor, Yard Machines, and Yard-Man. Some of these models are electric mowers, while others are gas-powered. It is also compatible with some stand-alone mulching kits. Use the compatibility checker before purchasing.

This replacement fuel tank is an authentic OEM part for a lawn mower. The fuel tank attaches to the exterior of a lawn mower and allows the appliance owner to top up their mower with more fuel. Fuel is then passed from the tank to the carburetor through a fuel line. Fuel tanks are made of durable reinforced plastic but because they are located on the outside of the mower, they are susceptible to physical damage. If something heavy were to fall on the fuel tank, it could be dented or even punctured. A damaged fuel tank will leak gasoline on the mower body, creating a potential fire hazard. In this situation, the tank should be drained and then unbolted and replaced. Be sure to remove the fuel line before unbolting it from the mower. This replacement fuel tank is a top of the line part sourced from its original manufacturer. It is compatible with lawn mowers made by MTD, Huskee, Cub Cadet, Bolens, Yard Man, Yard Machines, and Troy-Bilt. This part does not include a fuel cap or a grommet. These parts are sort separately.