Parts for Cub Cadet 41BDC75C010: Boom And Trimmer Parts

This bump head assembly is a genuine MTD part, sold individually. This bump head assembly can be used as a replacement part in a string trimmer. The purpose of the bump head assembly is to release the string, or the line, of the string trimmer in order to cut through greenery while in use by the operator.The bump head assembly in a string trimmer might have to be replaced if it can no longer properly unspool and dispense line. The bump head assembly could be punctured, dented, cracked, warped, eroded, or damaged in some other form.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This bump head assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is an anti-rotation screw. The lower handle clip on many devices, including lawn and garden equipment and tools, holds an anti-rotation screw. With use, over time, or because of other damages, the screw may be broken or stripped. When this occurs, a replacement anti-rotation screw is required to keep the machine secured together correctly for safe use.The replacement of an anti-rotation screw is quick and easy. A Torx screwdriver is recommended for replacing the part. Allow the machine to cool completely before working with it. Wear protective gloves for safety always. Remove a stripped or worn out screw if there is one present before securing in the new part to the lower handle clip.This anti-rotation screw is a genuine OEM part. It is sourced from the manufacturer. The replacement part is sold as an individual unit. The piece is made from high-quality, durable metal. It can be used in a variety of brands, including Ryobi, Troy-Bilt, MTD, Bolens, Yard-Man, Yard Machines, and Cub Cadet. The anti-rotation screw is compatible with many models of blowers, cultivators, edgers, snowblowers, trimmers, vacuums, and other tools and lawn and garden equipment.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This replacement part is a palnut. This is a genuine replacement part made by MTD. Palnuts are small but important to the overall workings of appliances. These parts work with other small pieces like screws and washers to ensure that the machine is able to work properly during use. A new palnut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or from a single incident that may have caused damage. It is normal for this part to endure large amounts of friction over time, and so it can become worn down with extended use. This palnut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer. "

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This replacement part is an outer housing drive. This is a genuine replacement part made by MTD. This part is responsible for keeping the engine running during use. The housing drive works with other parts to ensure that the driving mechanism is operating properly. A new outer housing drive might be needed if the current one is damaged in any way. This can include being dented, bent, cracked, or chipped. Wear work gloves during this job, especially if the previous part is damaged. Refer to the user manual for more instructions. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.