Bosch 00263102 Sump Gasket OEM Part

I replaced the gaskets with products from this site which I would not have been able to do without the video on this site. Hard job. The leak was still there though, so I have some hints with this kind of washer. 1) There is a float switch on the base that turns on the drain pump when there is a leak, that is why the drain pump runs constantly, it prevents catastrophic flooding in many cases. The float consists of a little styrofoam donut that lifts an arm, all white. The arm is connected to a red stick that, when lifted, starts the drain motor. About 1/2 inch of water activates the pump. 2) The fill system is weirdly complex and can get clogged which can cause a leak, look in the left wall panel if you dare. 3) The water inlet valve also adjusts water pressure, with standard water pressure there will be too much water sent into the fill system and it will overflow. 3) Be persistent, you can fix these.

Needed to verify that the probable cause of the noise was the actual failure, so followed the disassembly phase of your outstanding video on how to replace the impeller. Confirmed that, yes, the impeller was indeed worn out and had separated. Ordered replacement parts from your website, made easier by all the pictures provided. All of the parts arrived in three days as promised. Completed the repair by following the video step-by-step. Could not have completed this project without your excellent catalog of parts and videos. Thanks for helping me save nearly $1000 in replacement costs.