Briggs & Stratton Snow Removal Equipment Parts

This genuine rocker switch is designed as an identical replacement part for select models of blower/vacuum units. The rocker switch is also known as a power switch or on/off switch and it is what controls the current to electric blowers. The switch is made of plastic and metal. This switch may become worn and not function well after regular use because of the repetitive motion of turning the machine on and off. In some cases, the switch may experience electrical malfunctions that could present a fire hazard or keep the unit from working at all. In the event that the switch is damaged or defective, it will need to be replaced. This genuine OEM replacement rocker switch is manufactured by Briggs & Stratton. It can be used with more than 150 models of machines from Briggs & Stratton, Toro, and Vanguard. This part is made of durable plastic and metal components and is sold as an individual unit. It plugs into the pressure washer via wires, but a screwdriver may be needed to assist in the installation. Always disconnect the power supply when working on electrical components and wear gloves for safety.

This authentic OEM replacement push rod connects to the camshaft on small or medium sized gas-powered lawn tractor engines, and as the camshaft turns, the push rod transfers that motion into the valves. Without a functioning push rod, the valves will not open and the engine will not work. Push rods also act as transferring units that bring oil through the valves and into the camshaft. If these parts start to stick due to poor lubrication, push rods can bend and will no longer work properly. It is also possible, though rare, for a push rod to bend due to general metal fatigue over time. To identify a bent push rod, listen for a ticking sound in the engine and look out for any slipping gears. Accessing the push rods will mean taking apart the camshaft and valves and may require the user's manual. This replacement part is sourced from its original manufacturer and is compatible with Craftsman and Briggs & Stratton lawn tractors. It ships individually.

This authentic replacement item is a user's repair manual for Briggs & Stratton appliance engines. Whenever an operator has a problem with their appliance's engine, it's standard that they check the user's manual. It includes step-by-step directions for how to diagnose and then repair faulty parts. Many appliances use the same type of engine, so this manual is compatible with a wide variety of Briggs & Stratton products. It can also be used with some Toro and Lawn Boy engines as well. This product is sourced from the original manufacturer and ships individually. Any parts needed to make the repairs included in this manual will have to be purchased separately.

The ball bearing is a standard hardware part with multiple applications on various lawn and garden machines. The bearing is typically used in a position where it can reduce friction between two rotating components. This exposes them to constant wear, heat, vibration, friction, and pressure, causing them to wear out and become a part of routine maintenance for many machines. In the event that ball bearings fail, they will typically affect the operation of whatever they are attached to, or they could create squealing noises or other sounds from the machine. A prompt replacement with this genuine ball bearing will prevent the risk of further damage. This genuine OEM replacement part is manufactured by Murray and designed to work with more than 150 snowblowers and tractors from Snapper, Simplicity, and Murray. Buyers should check their owner's manual for the location and application of this ball bearing. This is made of durable metal and sold individually. Those who need several bearings will have to buy multiple quantities. Pliers and a screwdriver are required to complete the repair.

This is a genuine OEM replacement auger drive belt for a snowblower. The auger is the part of a snowblower that jostles snow up into the appliance and then out the chute. It rotates thanks to a system of pulleys and belts. This drive belt is one of the belts responsible for transferring rotational motion from one pulley to another. It helps to turn the auger axle. Drive belts are made of a rubber compound that may begin to fray over time and after repeated use. When a drive belt snaps, the auger will stop turning, and the broken belt should be visible. Replacing the belt itself is not too complicated. Getting access to it means that the auger housing must be removed, which will require a set of socket wrenches and a pair of pliers. Before disassembling the auger housing, be sure to detach the drive belt from the upper pulley. This replacement belt is a high-quality part compatible with Murray, Simplicity, and Snapper snowblowers. It comes sourced from the original manufacturer and ships independent of any additional hardware.

This self-tapping hex screw is designed to be used on various components of lawnmowers and snowblowers. It can also be used for many other things that require a self-tapping screw. It can secure wood, metal, brick, and plastic materials together. Self-tapping hex screws do not require a pilot hole as the screw makes it on its own. Only metal will require a pre-drilled hole to use the hex screw.A quick visual inspection will give insight into whether a hex screw needs to be replaced. Sometimes they can break or become damaged over time. In other cases, the self-tapping screw may become loose and will not hold materials together in the appropriate way. Some screw heads also get stripped and will require replacement. If a hex screw is damaged, a hex wrench can be used to remove it. The replacement hex screw can then be inserted and tightened to faster materials back together.This self-tapping hex screw can be used with lawnmowers, lawn tractors, and snow blowers made by Snapper, Murray, Briggs & Stratton, Craftsman, and Simplicity. It is a genuine OEM product directly sourced from the manufacturer. It comes as an individual screw.