Brute Tractor

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a thrust washer. It is a genuine replacement part made by MTD. Thrust washers are small but important component, allowing space between certain parts near and around the engine. Washers are typically used with screws and nuts to provide a tight and secure fit for many different parts in the machine.A new thrust washer might be needed if the current one is damaged or missing. Washers can become stripped over time due to friction and other motions inside the machine and need to be replaced. Be sure the engine is turned off before starting a repair. Typically washers are easy to replace and will only require a screwdriver or pliers.This thrust washer is a genuine OEM replacement part and is sourced directly from the manufacturer. Note that it is sold individually.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This replacement part is a front axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Front axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the front wheels are stationed properly on the appliance.A new front axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for a lawn mower. The purpose of the axle assembly is to affix the wheels the appliance and to create an adjustable height mechanism for the deck of the appliance.The axle assembly might have to be replaced if it has been damaged or is malfunctioning to the point that it cannot perform its dual function. If any of the components loosen over time or if the axle assembly is punctured, scraped, cracked, or otherwise damaged, the axle assembly should be removed and replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, troy-Bilt, Yard Machines, Murray, Yard Man, MasterCut, and Huskee.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This is an authentic v-belt that is made for use on lawnmowers and lawn tractors. This is one of the several belts found in the equipment and helps to drive it. The belt is made of durable materials but can wear out, break, or become damaged during regular use. If this occurs, the lawnmower may experience issues with performance or could stop working entirely. At this point, the v-belt will need to be replaced.A pair of work gloves and a set of basic tools may be needed to replace a v-belt. Turn off the lawnmower and place it on a flat surface before disconnecting the spark plug wire. Make sure to clean the pulleys before installing the new belt to get the longest life and best performance from the new part. Remove the old belt if it is still attached and replace it with the new part.This v-belt is designed to be used with several lawnmowers and lawn tractors manufactured by Toro, Yard-Man, Troy-Bilt, and MTD. This is an authentic OEM replacement part that is sourced directly from the manufacturer. This product is sold individually.

This part is a replacement blade brake. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective blade brake in a variety of lawn tractor models.The blade brake is what stops the movement of the tractor blade when the user disengages the clutch lever. This part is absolutely essential to safe, effective equipment usage and should be replaced if faulty in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this blade brake, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this blade brake is suitable for use on lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.