Parts for Bosch PCK755UC/01: Burners & Valves Parts

This ignition head is the replaceable spark electrode that creates the spark to light a gas burner. Restores reliable ignition so burners light quickly and safely when gas is present. What it does:

• Produces the spark needed to ignite the gas at a burner
• Replaces a cracked, burned, or non-sparking electrode
• Helps stop continuous clicking or no-ignite symptoms when the control calls for flame
• Works as the electrical ignition interface between the control and burner

• Turn off gas and electrical power to the appliance before starting work
• Handle the ceramic electrode carefully to avoid cracking; do not touch the ceramic tip with bare hands
• After installation, restore power and test each burner for proper spark and ignition

This ignition head is the replaceable spark electrode that creates the spark to light a gas burner. Restores reliable ignition so burners light quickly and safely when gas is present. What it does:

• Produces the spark needed to ignite the gas at a burner
• Replaces a cracked, burned, or non-sparking electrode
• Helps stop continuous clicking or no-ignite symptoms when the control calls for flame
• Works as the electrical ignition interface between the control and burner

• Turn off gas and electrical power to the appliance before starting work
• Handle the ceramic electrode carefully to avoid cracking; do not touch the ceramic tip with bare hands
• After installation, restore power and test each burner for proper spark and ignition

This Burner Valve is an OEM component for Bosch Ranges. Functioning as a crucial control mechanism, the burner valve regulates the flow of gas to the burner, ensuring precise control over the flame intensity for cooking.

A common issue with a malfunctioning Burner Valve involves wear over time, leading to potential leaks, irregular gas flow, or difficulties in adjusting flame levels. 

Symptoms of a faulty Burner Valve may include:

• Gas odor during appliance use
• Inconsistent flame or difficulty in adjusting burner intensity
• Failure of the burner to ignite or stay lit

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a burner housing, and it is used on ranges or other cooktops. There are typically four burner housings on regular ranges but it is possible smaller appliances might have fewer. This part sits in between the heat and the cooking materials and acts as a barrier between the heating element and the top of the cooktop. These are easily removed from the appliance for cleaning. A new burner housing might be needed if the current one is damaged in any way.This is a genuine OEM part. It is sourced directly from the manufacturer and is sold individually. This specific replacement burner housing is compatible with brands such as Bosch.

This sealing ring creates a watertight barrier to help prevent leaks and maintain proper appliance operation. Designed for direct OEM fit, it restores sealing performance where worn or damaged seals allow drips or seepage. What it does:

• Replaces a worn or damaged seal that can cause water to leak from pumps, valves, or housings
• Helps maintain correct water routing and pressure by restoring a tight seal
• Commonly used when you see visible cracks, flattening, or steady drips around a joint
• Compatible with the OEM mating surfaces to ensure a snug, reliable fit

• One sealing ring

• Inspect mating surfaces and clean away debris before installing the new seal
• Lubricate with a small amount of water or approved lubricant if recommended by the appliance manufacturer for easier installation
• Replace only when the unit is powered off and water supply is shut off; follow all safety and lockout procedures

This sealing gasket creates a watertight and airtight barrier to prevent leaks and maintain proper appliance performance. It replaces a worn or damaged seal to help stop water, steam, or air from escaping. What it does

• Forms a protective seal around the door/opening to prevent water or air leaks
• Restores proper pressure and temperature retention for efficient operation
• Helps stop common leak-related symptoms like puddling beneath the appliance or visible escaping steam
• Reduces strain on pumps and heaters caused by loss of seal integrity

• One sealing gasket as shown

• Disconnect power and shut off water supply before starting work
• Remove the old seal completely and clean the mounting surface before installing the new gasket
• Press the seal evenly into the channel; avoid sharp tools or adhesives unless OEM instructions require them

This pressure regulator controls gas flow into the appliance, helping maintain a steady burner pressure for consistent ignition and flame performance. Replaces a worn or faulty regulator to restore proper gas supply behavior. What it does:

• Regulates incoming gas pressure to the appliance manifold for stable burner operation
• Helps prevent high or low flame conditions that can cause uneven heating
• Commonly replaced when burners fail to light, flame is weak or sputters, or combustion is inconsistent
• Not a repair for gas leaks—if you smell gas, stop use immediately

• Shut off the gas supply and electrical power before starting any service
• Use proper gas fittings and thread sealant rated for gas; check all connections for leaks with a soap solution
• Installation may require disconnecting the gas line and accessing the oven/range rear or control compartment

This sealing rubber gasket keeps the appliance compartment watertight and helps maintain proper operation by preventing leaks and heat loss. It restores the original seal where worn, cracked, or compressed. What it does:

• Creates a tight seal to prevent water or air leaks around the door or access panel
• Helps maintain correct internal temperature and efficiency by blocking drafts
• Reduces noise and prevents debris or odors from escaping
• Commonly replaced when the seal is torn, deformed, or no longer sits flush

• Disconnect power and water before beginning any repair
• Remove the old gasket carefully to avoid damaging the mounting surface
• Inspect the sealing channel and clean before installing the new gasket for a proper fit

This replacement nut secures appliance components to keep assemblies tight and stable during use. It restores proper fastening where a worn, corroded, or missing nut causes loose parts or noise. What it does:

• Secures mounting studs, shafts, or fasteners to prevent components from shifting
• Restores clamping force lost from stripped or corroded hardware
• Helps stop vibration-related noise and rattling from loose assemblies
• Suitable wherever the original nut was used to hold parts in place

• Disconnect power and water before starting any repair
• Use the correct socket or wrench to avoid rounding the nut
• Thread carefully to avoid cross-threading; do not force a misaligned nut
• Replace any damaged mating hardware to ensure a secure fit