Parts for Bosch WTMC5330US/06: Cabinet Assembly Parts

This back panel replaces a damaged or missing rear housing piece to protect internal components and maintain proper airflow. It restores the appliance's rear enclosure so internal parts stay covered and secure. What it does:

• Covers and protects wiring, controls, and internal components from damage and debris
• Helps maintain designed airflow and cooling paths for reliable operation
• Provides anchor points for rear-mount components and fasteners
• Stops drafts and prevents small objects from entering the appliance cavity
• Addresses symptoms like exposed wiring, rattling or loose rear cover, and visible cracks or holes

• Disconnect power (unplug or shut off breaker) before beginning any work.
• Access the rear of the appliance and remove fasteners holding the old panel; save screws if reusable.
• Handle edges carefully—sheet metal may be sharp; wear gloves and eye protection.
• Follow OEM instructions for reassembly.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Adjustable leveling leg supports and balances your dryer during operation. Replace when worn, damaged, or causing wobbling. Confirm fit with model number.

Outer housing panel for your dryer's front assembly. Replaces cracked, damaged, or worn front case. Protects internal components and restores appearance.

Dryer cover cap that installs on the exterior or control panel. Replace this part if your cap is cracked, broken, missing, or worn from regular use.

Protective cap covers exposed openings and fittings on your dryer. Prevents dirt and moisture intrusion. Replace if cracked, broken, or missing.

This latch mechanism catches and holds your dryer door securely closed during operation. It ensures the door stays shut and maintains proper safety switches for the dryer to run. Replace it when your dryer door won't stay closed, pops open during cycles, or the dryer won't start even with the door shut.

The Door Hinge is an OEM part for Bosch dryers. This hinge is designed to securely attach the dryer door to the frame, allowing it to open and close smoothly while maintaining a proper seal during operation.

Causes of a bad door hinge can include regular wear and tear, damage from excessive force when opening or closing the door, or corrosion from exposure to moisture and heat.  

Symptoms of a bad door hinge include:

• The dryer door not closing properly or staying open
• Difficulty opening or closing the dryer door
• A misaligned dryer door
• Unusual noises or resistance when moving the door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Mounting screw that secures panels, brackets, and trim pieces on dryers. Replace when stripped, missing, or damaged to restore proper fastening.

Replacement access cover for dryers. Shields internal wiring and components from debris and moisture. Needed when original is cracked, broken, or missing.

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

Complete dryer door assembly that installs on the front panel. Replace if your door is cracked, broken, warped, or has damaged hinges or latches.

Dryer door won't stay closed or won't start? A broken door latch is often the cause. This replacement latch is a straightforward 5-10 minute fix.

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement mounting screw for securing panels, brackets, and trim on appliances. Needed when original fasteners are stripped, missing, or lost.

This transparent window allows you to monitor clothes while the dryer is running and forms part of the door assembly. Replace it when the glass is cracked, shattered, or becomes so cloudy that visibility is impaired.