Parts for Ge DBL333EB6CC: 03 - Cabinet & Drum Parts

A replacement pan head screw used to fasten appliance panels and components. Its standard #8 coarse thread and 3/8-inch length secure trim, brackets, and small assemblies for stable operation. What it does:

• Fastens panels, brackets, and small parts in household appliances
• Replaces stripped, rusted, or missing #8-18 pan head screws
• Restores secure mounting where vibration or wear caused looseness
• Works with sheet-metal or threaded inserts designed for #8-18 screws

• Disconnect power to the appliance before beginning any repair
• Use the correct #2 Phillips or compatible driver to avoid cam-out
• Thread in straight and tighten until snug; avoid over-tightening to prevent stripping
• Keep small screws away from children and dispose of old fasteners safely

This drum glide provides a smooth, low-friction surface at the front of the dryer drum. Replacing worn glides restores quiet, even drum rotation and helps prevent scraping and fabric damage.

• Supports the front of the drum and allows smooth rotation on the front bearing/bulkhead
• Reduces friction and metal-on-metal contact to minimize noise and wear
• Helps maintain proper drum alignment and spacing at the door opening
• Common symptoms of a worn glide: scraping or squealing while tumbling, drum hard to turn, brown/black marks on clothes, or snagging at the front edge

• Disconnect power; shut off gas supply for gas dryers before servicing
• Remove the top and front panel/bulkhead to access the front drum support
• Support the drum when the front panel is off to avoid stressing the rear bearing
• Many models use multiple glides; inspect all front support wear items (glides/slides and felt seal) and replace as needed for even wear

The Rear Drum Bearing Kit is an OEM part for GE dryers. The kit includes a rear bearing, shaft support, ball shaft, ball bearing, ball bearing retainer, high-temperature lubricant, and screws required for installation. 

Causes of a bad rear drum bearing can include normal wear and tear over time, exposure to excessive heat, or heavy use that puts strain on the bearing. A failing bearing can cause the drum to become misaligned, creating friction and noise during operation.

Symptoms of a bad rear drum bearing include:

• Squeaking or grinding noises when the dryer is running
• The drum being difficult to turn manually
• Clothes not drying evenly due to improper drum rotation
• The dryer stopping mid-cycle or failing to start

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement part is a ball bearing, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This ball bearing is found in dryers and is an important part of the machine as a whole, even though this part is very small. Ball bearings are a rolling element that helps carries loads, reduces friction in the machine, and positions moving parts. The main purpose is to reduce rotational friction. A new ball bearing might be needed if the user notices that additional friction is being placed on the tub of the dryer. If the ball bearings are off-balanced, it is possible that the drum of the appliance will wobble and create loud noises during the drying cycles. Be sure the appliance is cooled down before attempting to replace this part. These ball bearings are sold individually even though dryers typically have more than one. This is a genuine OEM part.

This replacement part is a dryer clip, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This dryer clip is typically found on dryers and there are usually multiple clips on one appliance. These clips help hold the front panel in place and secure so that it does not come off during the drying cycle. A new dryer clip might be needed if the front panel of the dryer is off balance or not attached correctly. It is possible that the clips can become loose over time as the appliance is prone to shaking and vibrating. The clips are important as it keeps the dangerous parts covered. If the entire front panel can be lifted off then it is time to replace the dryer clips. These clips are sold individually even though dryers typically have more than one. This clip is a genuine OEM part.

The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.

Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.  

Symptoms of a bad Drum Support Bearing include:

• A squealing or grinding noise during operation, indicating that the bearing is worn out.
• Difficulty turning the drum by hand.
• Excessive vibration or shaking of the dryer.
• Increased drying times, as a result of the drum not maintaining the correct speed due to bearing friction.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dryer bearing bracket secures the drum's rear bearing to keep the drum aligned and rotating smoothly. Replacing a worn bracket can help reduce drum wobble, scraping noises, and uneven drum rotation. What it does:

• Supports and locates the rear drum bearing to maintain proper drum alignment.
• Helps prevent the drum from wobbling, rubbing, or scraping against the cabinet.
• Can reduce or eliminate grinding, squealing, or thumping noises caused by a loose or damaged rear support.
• Works with the dryer's rear bearing assembly to enable consistent drum rotation.

• Disconnect electrical power (and gas, if applicable) before beginning any repair.
• Access typically requires removing the dryer drum and rear bulkhead.
• Inspect the bearing, shaft, and surrounding glides; replace any worn components to prevent repeat failure.

This is a heating element for dryers. This is the component that creates the dryer's heat. It is essential for the drying process.When the heating element stops working on a dryer, it will not produce heat. It may also produce heat, but just not enough heat. This can make the drying cycle take longer to complete. However, replacing this part is a simple task. Disconnect the power before installing this part. Wear gloves during the replacement process for safety. If the dryer is heating at all, make sure to give it plenty of time to cool down before trying to replace it. This component is sourced straight from the manufacturer. It is sold individually. This heating element with housing is compatible with dryers that are manufactured by the General Electric and Hotpoint brands. This part is made out of high-quality materials and is a durable replacement part.

8 - 18 x 0.31

This is a 10-14 x 1.00 screw used to secure appliance panels and components. It provides a proper fit for threaded openings and restores fastener integrity after repairs. What it does

• Fastens panels, brackets and trim to the appliance frame
• Replaces missing or stripped screws that cause loose or rattling parts
• Secures components that require a 10-14 thread size with a 1.00" length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid cam-out and head damage
• Thread into matching 10-14 female threads only; do not force into incorrect or damaged holes
• Do not overtighten—stop when snug to avoid stripping threads or cracking panels

This drum vane replaces a damaged or missing dryer drum lifter that helps lift and tumble clothes for even drying and gentle fabric movement. Restores proper tumbling and reduces fabric snags when installed correctly. What it does:

• Lifts and guides clothing as the dryer drum rotates to promote even tumbling.
• Prevents clothes from bunching or staying in one spot during a cycle.
• Reduces scraping, thumping, or uneven noise caused by a broken or missing vane.
• Helps maintain proper drum rotation and load distribution.

• Disconnect power to the appliance before starting any repairs.
• Access the drum per your model's service instructions (front panel or cabinet removal may be required).
• Align the vane with the drum mounting points and secure using the original fasteners; replace damaged clips or screws if needed.
• After reassembly, run a short no-heat cycle to ensure smooth drum rotation and correct installation.

For complete bearing kit order WE25X10001.

This dryer safety thermostat monitors internal temperature and opens the circuit if the unit overheats, protecting the heater and wiring. Replacing a failed thermostat restores proper over-temperature cutoff and safe, consistent drying performance. What it does:

• Monitors air temperature at the heater/exhaust path
• Interrupts power to the heating element if temperatures exceed its limit
• Helps prevent overheating and thermal damage
• Common symptoms can include: no heat, heat cutting out early or overheating, or the dryer shutting off on high heat

• 1 safety thermostat

• Disconnect power before service; for gas dryers, also shut off the gas supply
• Typically mounted on the heater housing or exhaust duct; note wire positions and transfer one at a time
• Secure with existing hardware and ensure tight electrical connections
• After replacement, clean the lint filter, vent hose, and exhaust duct to ensure proper airflow and prevent repeat overheat trips

This thermal limiter is the dryer's high-limit thermostat. It monitors temperature and opens the heating circuit if the dryer overheats, helping protect components and allowing the appliance to operate safely.

• Provides over-temperature protection for the dryer's heating circuit
• Opens the circuit when excessive heat is detected to prevent damage
• If failed open, the dryer may run but not heat
• Repeated tripping can cause intermittent heat and longer dry times

• Disconnect power and allow the dryer to cool before servicing; shut off gas supply for gas models
• Handle wiring carefully; transfer leads one at a time and mount the limiter in the original location/orientation
• Use a multimeter to check continuity
• Clear lint buildup and prevent repeat overheating

8 - 18 x .375

This adjustable leveling leg replaces a worn or damaged refrigerator foot to restore stable, level support and smooth door operation. Simple height adjustment helps eliminate rocking and keeps the appliance sitting evenly on uneven floors. What it does:

• Supports the appliance weight and lets you fine-tune height for proper leveling
• Compensates for uneven floors to reduce rocking and wobble
• Helps doors seal and align correctly by allowing height adjustment
• Reduces vibration-related noise when the cabinet sits evenly

• One adjustable leveling leg

• Use gloves and eye protection; unplug the appliance and remove food or shelves near the work area before starting
• Tilt or raise the appliance slightly as recommended by the manufacturer to access the leveling leg; support the cabinet securely
• Turn the leg to raise or lower the appliance; check level and door operation, then recheck after the appliance settles
• If the leg threads or mounting hardware are damaged, replace all affected components before returning the appliance to service