Parts for Bosch B10CB80NVS/05: Cabinet Parts

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

A replacement shock absorber that cushions and controls door movement for quieter, more stable operation. Restores smooth opening and closing and helps prevent sudden slams or excessive vibration. What it does

• Dampens and controls door motion to reduce noise and impact when opening or closing.
• Stabilizes the appliance door or panel to prevent rattling and uneven movement.
• Helps restore normal operation if the door feels loose, slams shut, or closes too quickly.
• Works as part of the door suspension/damper system to protect hinge and frame components.

• One shock absorber

• Turn off power to the appliance before beginning any repair and unplug or switch off the circuit breaker.
• Inspect mounting clips and hinge hardware; replace any worn fasteners for a secure fit.
• Installation typically requires removing the outer door or access panel—support the door to prevent injury.

This NTC temperature sensor detects internal appliance temperature and sends readings to the control board so the unit can regulate cooling. It's a direct-replacement sensing element used in refrigerators/freezers and other temperature-controlled compartments. What it does:

• Measures compartment temperature using an NTC thermistor element
• Sends temperature data to the control board for accurate cooling cycles
• Often replaced when temperature reads incorrect, cooling is inconsistent, or the compressor runs excessively
• Can resolve intermittent temperature-related error codes tied to the sensor circuit

• Always unplug the appliance or switch off power at the breaker before starting work
• Handle the sensor and wiring harness carefully to avoid damage; secure connectors fully
• Replace only if confirmed compatible with your model and symptoms;

This LED plate is the indicator light assembly that mounts behind the appliance control panel to provide status and function illumination. Replacing a damaged or dark LED plate restores clear, visible display lighting for the control area. What it does:

• Provides the indicator/LED illumination for the control console so settings and status are visible
• Replaces cracked, burnt, or non-illuminating LED plate assemblies
• Helps resolve symptoms such as dim or missing control lights and unreadable indicators
• Works as the visible lens and LED substrate for button/status lights on the console

• Disconnect power before beginning any repair to avoid shock or damage.
• Access typically requires removing the console/door trim; handle assembly and connectors carefully.
• Avoid touching LEDs or circuitry with bare hands; reassemble securely to prevent moisture intrusion.

This rubber foot cushions and levels the appliance to reduce vibration, noise, and movement for smoother operation. It helps protect floors and stabilizes the unit for consistent performance. What it does:

• Provides a rubber buffer between the appliance and the floor to absorb vibration and reduce rattling or movement.
• Helps level the appliance to prevent rocking that can cause noise or poor operation.
• Protects flooring from scratches, dents, and wear where the appliance contacts the floor.
• Commonly replaced when the foot is cracked, worn, missing, or the appliance rocks or vibrates excessively.

• One replacement rubber foot

• Turn the appliance off and unplug it before inspecting or replacing feet.
• Raise or tilt the appliance only as needed and use proper support—avoid working solely by hand under an unsupported unit.
• Thread or press the new foot in place per the original style; do not force parts that do not align.

This bushing is a small support sleeve that reduces friction and guides rotating parts for smooth operation. Replacing a worn bushing helps stop noise and excessive wear, restoring quieter, more stable appliance performance. What it does:

• Supports and centers a rotating shaft or component to reduce friction and wear
• Helps maintain smooth rotation and proper alignment of moving parts
• Common symptom indicators: squeaking, grinding, rattling or excessive play in the rotating assembly
• Prevents metal-to-metal contact that can cause premature wear of adjacent components

• Disconnect power and water before starting any repair
• Replacement typically requires partial disassembly; keep fasteners and small parts organized
• Inspect surrounding parts and replace if worn
• Use only manufacturer-recommended parts and follow the service manual for reassembly

This bushing is a small support sleeve that reduces friction and guides rotating parts for smooth operation. Replacing a worn bushing helps stop noise and excessive wear, restoring quieter, more stable appliance performance. What it does:

• Supports and centers a rotating shaft or component to reduce friction and wear
• Helps maintain smooth rotation and proper alignment of moving parts
• Common symptom indicators: squeaking, grinding, rattling or excessive play in the rotating assembly
• Prevents metal-to-metal contact that can cause premature wear of adjacent components

• Disconnect power and water before starting any repair
• Replacement typically requires partial disassembly; keep fasteners and small parts organized
• Inspect surrounding parts and replace if worn
• Use only manufacturer-recommended parts and follow the service manual for reassembly

This door bearing is a hinge component that supports and guides the appliance door for smooth opening and closing. Replacing a worn bearing restores proper door alignment and reduces noise and binding. What it does:

• Supports the door at the hinge and helps keep it balanced during operation
• Reduces friction so the door opens and closes smoothly
• Prevents excessive wear on the hinge assembly and related components
• Commonly linked to door sag, uneven closing, grinding, or noisy operation when worn

• Disconnect power and water before starting any repair
• Support the door during removal to prevent it from falling or bending the hinges
• Access may require removing the lower kickplate or inner door panel depending on model
• Inspect adjacent hinge components; replace damaged parts and test door alignment after installation

This electronic control board manages the dishwasher's cycle selection and user interface, restoring proper control operation and reliable cycle sequencing. Replace a failed board to recover normal controls and display behavior. What it does:

• Interprets button presses and controls wash cycle selection and timing
• Sends signals to valves, pumps, and heaters to start and stop functions
• Updates the display and status indicators based on cycle progress
• Commonly replaced when the dishwasher won't start, displays error codes, has unresponsive buttons, or cycles don't advance

• Disconnect power to the appliance before starting any repair
• Handle the board by the edges and avoid static discharge; wear a grounding strap if available
• Installation requires removing the control panel or console; keep fasteners and wiring organized

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator

This is a replacement control panel that restores the front console appearance and provides the interface for dishwasher cycle selection and status. It fits into the door/console area and lets buttons and displays mount securely. What it does:

• Houses the push buttons, touch controls, and display used to select cycles and options
• Protects internal control electronics from moisture and debris at the front of the appliance
• Restores proper button alignment and tactile feedback when the original panel is cracked or worn
• Can resolve issues where controls are obscured or cosmetic damage prevents normal use

• 1 control panel (front console) as shown

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Access may require removing the dishwasher door inner panel or top access panel; follow manufacturer service instructions
• Handle carefully to avoid scratching the finish and to prevent damaging attached snaps or mounting tabs