Parts for Bosch WFMC640SUC/03: Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Rear case panel for washers. Covers and protects internal components at the back of the machine. Replace if cracked, damaged, or missing.

Shipping bolt kit secures washer drum during transport. Includes bolt, washer, and sleeve. Replace if missing, stripped, or lost before moving your washer.

This cover protects internal components and provides a finished appearance. Replace if cracked, broken, or missing to restore proper enclosure.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

2 included - Front load

Adjustable leveling foot that installs on the bottom of your washer to provide stable support. Replace when cracked, worn, or missing to restore balance.

This suspension rod supports and stabilizes the washer drum assembly. Replace if your rod is bent, broken, or missing to restore proper drum support.

Mounting bracket for washer installations. Secures and stabilizes washer components. Replace if bent, cracked, or broken to restore proper support.

Replaces a broken, cracked, or worn washer door hinge. This pivoting component attaches the door to the machine body for smooth opening and closing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement mounting screw for dryers and washers. Secures panels, brackets, and trim pieces. Restores snug fit when original fastener is stripped or missing.

This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.

• Acts as a bushing/spacer around a pin or shaft to guide motion
• Helps maintain alignment of connected parts
• Reduces friction and wear between mating surfaces
• A worn or missing sleeve can cause wobble, rough movement, or squeaking/clicking noises

• Disconnect power and shut off water before servicing
• Note the sleeve's orientation and seated depth during removal to match on installation
• Inspect the mating pin/shaft and surrounding parts; replace if worn for best fit
• Verify smooth movement by hand before reassembly and testing

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

Fix a washer that won't start or stops mid-cycle with a faulty door lock. This mechanical locking assembly secures the door during wash cycles.

Replacement screw secures appliance panels, brackets, and internal components. Install when original is stripped, missing, or corroded for proper alignment.

This replacement trim strip restores the appliance's finished edge and helps cover gaps or fastener holes for a clean, factory appearance. It's a simple cosmetic part that brings worn or damaged trim back to neat condition. What it does:

• Covers exposed edges or fasteners to improve the appliance's appearance
• Restores missing or damaged trim that can catch dirt or moisture
• Helps maintain a finished look after repairs or panel replacement
• Fits where the original decorative/edge strip was installed

• One trim strip

• Basic installation; often snaps or screws into place—inspect mounting points before installing
• Turn off and unplug the appliance if working near electrical components
• Use appropriate trim fasteners; do not force the strip into place to avoid damaging panels

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Flat mounting washer that sits under screws or bolts to distribute load and maintain proper spacing. Replace if cracked, bent, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.