Parts for Electrolux FPHT2097VF0: Cabinet Parts

Replacement door hinge assembly for top-mount refrigerators. Supports and pivots the door for smooth operation. Replace if worn, cracked, or broken.

Fix a sagging or misaligned refrigerator door with this hinge assembly. Restores smooth operation and ensures your door closes flush and seals properly.

Hardware screw for securing shelves, bins, and trim panels inside refrigerators and freezers. Replace when stripped, corroded, or missing during repairs.

This is a gray plastic cover that conceals the hinge mounting hole on the non-hinged side of the refrigerator or freezer door. It provides a clean, finished appearance where a reversible door hinge is not installed. Replace this cover if it is cracked, missing, or discolored, leaving an exposed hole in the cabinet or door.

This is a gray plastic cover that fits over the lower door hinge on a freezer, concealing the hinge hardware for a clean finished appearance. It snaps into place over the hinge area near the base of the unit. Replace this cover if it is cracked, broken, or missing, which can leave the hinge exposed and detract from the appliance's appearance.

Protective shroud cover for top-mount refrigerators. Replaces cracked, broken, or missing covers. Shields internal components and restores appearance.

Replace your refrigerator's light assembly to restore interior visibility. Install when bulb housing cracks or wiring fails. Verify fit with your model.

Seals openings where tubes or wires pass through your refrigerator cabinet. Replace if cracked, torn, or causing air leaks. Confirm fit with your model.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.

Refrigerator not cooling but freezer works? Broken evaporator fan blade stops cold air circulation. Easy DIY fix in under an hour with basic tools.

Fix uneven cooling or frost buildup in your refrigerator. This evaporator fan motor circulates air across coils for consistent temperature control.

Replace a broken or missing control access cover to protect your refrigerator's control board and wiring from dust, spills, and damage. Easy install.

Replace a cracked, broken, or missing refrigerator cover assembly. Shields internal components and restores a secure, finished appearance.

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners

Replacement access panel cover for freezers and refrigerators. Restores finished appearance and protects internal components. Replaces cracked or missing panels.

This is a hinge cover designed to fit over the door hinge on a refrigerator or freezer section. It provides a finished appearance by concealing the hinge hardware and helps protect it from dust and debris. Replace this cover if it is cracked, broken, or missing, which can detract from the appliance's appearance.

Replacement mounting screw for top-mount refrigerators. Secures internal components and panels. Order a new screw if original is stripped, lost, or damaged.

Supports and pivots your refrigerator door for smooth operation and proper alignment. Replace if door sags or won't close fully. Verify fit with model number.

Secures the center hinge on your refrigerator door for proper alignment and smooth opening. Replace if the pin is worn, bent, or broken to restore stability.

Hardware screw for securing shelves, bins, and trim panels inside refrigerators and freezers. Replace when stripped, corroded, or missing during repairs.

Replaces a cracked or missing access cover that shields internal components in your refrigerator. Restores a finished look and keeps wiring secure.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Replacement mounting screw for refrigerators and freezers. Secures panels, brackets, trim, and covers. Replace if missing, stripped, or damaged.

Replace your refrigerator's access cover panel if cracked, broken, or missing. This cosmetic component installs on the unit to cover internal parts.

Adhesive-backed plastic clip secures wires and small hoses inside your freezer or refrigerator. Replace when loose or damaged to reduce rattling. Confirm fit with your model number before ordering.