Parts for Frigidaire FFFU20F2VW0: Cabinet Parts

This replacement access cover restores the finished appearance of the appliance and protects internal components from dust and debris. It's a direct-fit exterior/access panel used where a damaged or missing cover exposes parts. What it does:

• Shields internal components and wiring from dust, spills, and accidental contact
• Restores the appliance's finished look when the original cover is cracked, broken, or missing
• Helps reduce vibration noise caused by loose or damaged panels
• Keeps airflow and component clearances as intended by the manufacturer

• Disconnect power (unplug or switch off breaker) before servicing the appliance
• Use basic hand tools to remove fasteners; retain hardware for reinstallation if original fasteners are serviceable
• Handle edges carefully—covers and mounting areas may have sharp metal or plastic edges

The Clip is an OEM part for Frigidaire refrigerators. It is a small but crucial component that helps secure and hold various parts in place within the refrigerator's interior or exterior.

Causes of a bad clip in a refrigerator can include wear and tear over time, brittleness due to age or exposure to temperature changes, or accidental breakage during cleaning or maintenance.

Symptoms of a bad clip in a refrigerator may include:

• Loose or detached shelves, bins, or door components
• Rattling or vibration noises coming from the interior
• Improper alignment or fit of shelves or door components
• Potential safety hazards if electrical wiring is not properly secured

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Clip is an OEM replacement part for Frigidaire refrigerators. It works to securely hold various refrigerator components such as shelves or baskets in place. The clip applies tension to prevent shelves from shifting or drawers from opening unintentionally during regular usage and cleaning. 

Causes of a bad clip can include cracks or breaks from over-tightening or repetitive fastening and unfastening over time. The clip’s plastic material can also become brittle or misshapen with age.

Symptoms of a bad clip include: 

• Shelves or baskets that no longer stay firmly in place and slide around easily inside the refrigerator 
• Gaps appearing around refrigerator shelves where the clip has failed to hold tightly
• Difficulty accessing certain refrigerator areas if shelves or other components now slide freely

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

This replacement access cover restores the appliance's finished appearance while protecting internal components and controls from dust and debris. It helps keep wiring and small parts secure so the unit operates safely. What it does:

• Protects control assemblies, wiring and internal components from dust, spills and accidental contact
• Restores a secure, finished fit when the original cover is cracked, broken or missing
• Helps prevent loose parts from shifting during use and reduces risk of debris-related issues
• Visible damage, a loose or rattling cover, or gaps around the control area are common signs this part is needed

• One replacement access cover

• Disconnect power (unplug or switch off circuit) before starting any work
• Remove necessary trim or panels to access mounting screws; keep fasteners for reassembly
• Handle plastic clips and tabs gently to avoid breakage; use proper tools (screwdriver, trim tool)

This replacement cover is an access panel that protects internal components and keeps the appliance looking finished. It provides a secure barrier to help prevent debris from entering and allows service access when maintenance is needed. What it does

• Covers and protects internal parts from dust, dirt and incidental contact
• Helps reduce airflow of loose debris into the component area
• Provides a finished exterior appearance after repair or service
• Allows access to controls or components when removed
• Fits where the original factory cover was installed

• One replacement cover

• Disconnect power (and gas if applicable) before starting any repair
• Remove fasteners holding the old cover; keep hardware
• Align cover and reinstall screws until snug; do not overtighten
• Use caution: edges may be sharp and panels may be thin

The Air Tower is an OEM part for Frigidaire refrigerators. The cover helps circulate cold air throughout the freezer while also protecting internal components from damage or debris.

Over time, freezer air tower covers can become damaged or discolored due to repeated exposure to cold temperatures and humidity inside the freezer. Signs of a bad cover include cracks, holes, or missing pieces that compromise its ability to properly ventilate the freezer.

Symptoms of a bad freezer air tower cover include:

• Inefficient air circulation leading to warmer freezer temperatures
• Formation of ice buildup around the evaporator coil
• Exposure of internal freezer components to damage or contamination

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Knob is an OEM component specifically designed for Frigidaire refrigerators. As an interface control, it allows settings of temperature and functionality through an intuitive analog mechanism. 

Causes of knob failure relate to general wear from frequent manual adjustments over many years of use. Exposure to cleaning chemicals can also deteriorate printed markings.

Symptoms of a defective knob include:

• Difficulty turning or selecting desired temperatures  
• Knob detaching from stem or shattering
• Faded markings confusing temperature display

This OEM Frigidaire part is also compatible with Electrolux and Crosley brand refrigerators. Replacing worn knobs preserves simple temperature navigation and indicator visibility to optimize the user experience as intended by the manufacturer. Maintaining interface controls avoids potential frustrations.
 

The Harness Assembly is an OEM part for Frigidaire freezers. It is a bundle of color-coded wires that connect electronic and mechanical components inside the freezer, allowing them to communicate and function as intended. The harness assembly reliably transmits signals from the control board to things like fans, temperature sensors, and door alarms.  

Symptoms of a bad harness assembly include:  

• Components not receiving power or control signals
• Intermittent operation of internal lights or fans  
• Temperature control or cooling issues
• Buzzing or humming noises from loose wires
• Error codes related to communicating with modules

Causes of a bad dispenser can include damage over time from repeated bending and flexing of wires, rodent chewing, or corroded connections.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This hinge attaches the refrigerator door to the cabinet so the door opens, closes and stays aligned for a proper seal. It restores secure door movement and helps prevent rubbing, sagging or uneven gaps. What it does:

• Provides a pivot point for the refrigerator door to open and close smoothly
• Keeps the door aligned to maintain an even seal and temperature control
• Prevents door sagging or misalignment that can cause rubbing or poor closure
• Replaces a worn, bent or damaged hinge to restore reliable operation

• One hinge

• Disconnect power and empty the door before starting; support the door while removing the hinge
• Basic hand tools required; follow manufacturer torque guidance if available
• Inspect mating hardware and seals; replace any damaged fasteners or gaskets

The Fan Mount is an OEM part for Frigidaire refrigerators. It is responsible for holding the evaporator fan in place within the refrigerator's freezer compartment.

A bad fan mount can be caused by regular wear and tear, physical damage, or improper installation. Signs of a faulty fan mount include excessive noise coming from the freezer, reduced cooling performance, or the fan not spinning properly.

Symptoms of a bad fan mount can include:

• Unusual noises coming from the freezer
• Insufficient cooling or uneven temperature
• The evaporator fan not spinning
• Excessive frost or ice buildup in the freezer

Replace your damaged or worn-out fan mount with this genuine OEM part to ensure proper airflow in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Bottom Hinge is an OEM part for Frigidaire freezers. It is responsible for supporting and allowing the smooth opening and closing of the freezer door.

A bad freezer bottom hinge can be caused by wear and tear, damage, or improper installation. When the bottom hinge becomes faulty, it can result in issues such as difficulty in opening or closing the freezer door, misalignment, or improper sealing.

Symptoms of a bad freezer bottom hinge include:

• The freezer door not closing properly or popping open
• Uneven or misaligned door alignment
• Excessive gaps or air leaks around the door seal
• Unusual noises when opening or closing the door

Replace your faulty freezer bottom hinge with this genuine OEM Frigidaire part to restore  your freezer door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This bottom door hinge is a direct replacement part that supports and guides the appliance door for proper alignment and smooth opening. Restores secure door mounting and helps maintain an even seal. What it does:

• Supports the bottom of the door and bears door weight
• Keeps the door aligned to close evenly and seal properly
• Prevents door sagging and uneven gaps that can affect cooling
• Reduces rubbing, scraping, or noisy operation from a loose hinge

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing and installing the hinge to prevent injury or damage
• Use basic hand tools; follow torque recommendations from the manufacturer and avoid overtightening

The Fan Motor is an OEM component for Frigidaire refrigerators. Located inside the refrigerator compartment, this specialized motor powers airflow and circulation through ducts within the cabinet.

Causes of a malfunctioning fan motor can include normal wear from constant operation, collecting debris that causes imbalance or binding, and motor winding failure over extended use.  

Symptoms requiring replacement are: 

• Reduced/insufficient air circulation within the refrigerator  
• Abnormally high temperatures or frost accumulation
• Loud buzzing or grinding noises emanating from the motor

This OEM part fits Electrolux, Gibson, Kelvinator and select Kenmore models as well for a direct fit. Replace promptly for dependable fan performance.

The Fan Seal and Drain Tube Kit is an OEM part cfor Frigidaire refrigerators. This comprehensive kit contains the rubber seal between the condenser fan motor and evaporator cover, as well as the drain tube that directs condensation away from electrical components. 

Causes of a faulty kit can include deterioration of seals over many years, cracks developing in the drain tube, or misalignment preventing full contact and ventilation. 

Symptoms pointing to a bad fan seal and drain tube set are:

• Water pooling or moisture inside rear refrigerator walls  
• Excessive frost or ice buildup despite proper temperatures
• Strange noises or vibrations from air circulation issues
• Potential electrical problems due to condensation contact

Note: This kit includes a cover, drain tube connection, and sealing tape.

This OEM Frigidaire replacement kit restores ventilation and condensation control. It is also compatible with Electrolux, Gibson, and Kelvinator models.
 

A replacement protective cover that restores the appliance's finished appearance and shields internal components from dirt and accidental contact. Fits where the original trim or access cover was removed or damaged. What it does:

• Protects internal components and wiring from dust, spills, and incidental contact.
• Restores the appliance's exterior finish for a clean, factory look.
• Helps maintain proper airflow and prevents small objects from entering service areas.
• Useful when replacing nearby parts or after service to reseal the access area.

• One replacement cover.

• Remove power (unplug or shut off breaker) before attempting installation to avoid electrical hazard.
• Installation may require removal of adjacent panels or fasteners; keep hardware organized for reassembly.
• Inspect mating surfaces and fasteners for damage and replace any stripped screws.

This cover protects the appliance's control board and wiring, keeping them secure from spills, dust, and physical damage so the controls work reliably and are easier to service. What it does:

• Shields the control board and associated wiring from moisture, dust, and accidental contact
• Helps prevent shorts and component damage that can cause control or electrical faults
• Keeps wiring and connectors routed and secured to reduce vibration-related issues
• Restores a finished appearance and proper airflow around control components

• One cover as shown

• Disconnect power before servicing to avoid electric shock
• Remove any mounting screws or clips holding the old cover, then lift off and fit the replacement in the same orientation
• Reinstall screws or clips securely but avoid overtightening plastic fasteners

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners

A short hex washer head screw used to fasten panels and components on compatible Frigidaire appliances. Replaces a lost, stripped, or damaged screw to restore secure assembly and reduce rattling or loose parts. What it does:

• Secures panels, brackets, and internal components where a short hex washer head screw is required
• Restores proper fit when original screws are missing, loose, or stripped
• Helps eliminate vibration noise caused by loose fasteners
• Provides the correct head profile for a stable, flush fastening point

• One hex washer head screw

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct sized hex driver or socket to avoid rounding the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized to ensure proper replacement

The Freezer Wire Harness is an OEM replacement part for Frigidaire refrigerators. It offers a series of color-coded wires that transmit control signals throughout the freezer compartment. 

Causes of a bad wire harness can involve typical fraying or cracking of insulation from continuous use over time. Rodent damage or accidental cutting during appliance repairs are other potential issues.

Symptoms of a bad freezer wire harness include:

• Lights or other freezer features not functioning properly
• Error codes or control issues with freezer operation  
• Overcooling or warm spots developing in the freezer
• Responsiveness problems with freezer controls and components

This Frigidaire OEM replacement is compatible with some Electrolux, Maytag, and Kenmore models as well.

The Potentiometer Retainer Clip is an OEM part for Frigidaire bottom-mount refrigerators. Located inside the ice maker assembly, this small clip firmly holds the potentiometer dial in position. The potentiometer regulates water temperature for producing quality ice cubes.

Potential causes of failure include normal wear from extended use in the refrigerator environment. Heat cycling during ice production may cause faster deterioration over time.

Symptoms of an improperly secured or damaged retainer clip include:

• Loose or faulty potentiometer preventing ice making  
• Water not dispensing at the proper temperature
• Inability to reliably produce clear, solid ice cubes
• Internal noises from components loosened without the clip

This retainer clip fits additional brands including Electrolux, Gibson and select Kenmore models.

The Freezer Seal is an OEM component specifically designed for Frigidaire refrigerators. This durable rubber seal forms a tight weatherstripping around the perimeter of the refrigerator's freezer door, preventing cold air from escaping. 

Causes of a bad freezer seal include drying out and cracking over many years of use or damage caused by over-tightening the door hinges. 

Symptoms of a bad freezer seal include: 

• Frost or ice buildup around the freezer door seal
• Warm air entering the freezer compartment 
• Higher energy bills due to decreased insulation
• Moisture accumulating in the floor drain 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.