Parts for Frigidaire FFHT1835VB0: Cabinet Parts

This is a bottom right door hinge assembly for refrigerators that supports and guides the door for smooth opening and secure closing. Replaces a worn or damaged hinge to restore proper door alignment and operation. What it does:

• Supports the lower corner of the refrigerator door and bears its weight
• Guides door swing so the door opens and closes smoothly
• Helps maintain proper door alignment and an even seal
• Common symptom: door sagging, dragging, uneven gap, or difficulty closing

• Unplug the appliance and remove contents or secure shelves before starting
• Support the door while removing/installing the hinge to prevent dropping or damage
• Reuse original fasteners if in good condition; replace damaged screws or pins as needed
• Check door alignment after installation and adjust per manufacturer instructions

This bottom right door hinge assembly restores proper door alignment and smooth pivoting for refrigerators. Replaces a worn or damaged hinge to reduce door sag and help the door close evenly for better sealing and performance. What it does:

• Provides a new bottom pivot point so the refrigerator door opens and closes smoothly
• Corrects door sagging or misalignment that can prevent a tight seal
• Reduces rubbing or binding at the door bottom that can cause uneven wear
• Restores proper door clearance to improve overall cabinet fit and operation

• High-level task: remove and support the door before replacing the bottom hinge; two people may be needed for safe handling
• Use hand tools; avoid forcing components and follow the appliance manufacturer's service instructions
• Wear gloves and eye protection; keep hinges and pins clean and properly seated during reassembly

This replacement hinge assembly supports and pivots the appliance door, helping it open and close smoothly while staying properly aligned. A worn hinge can cause sagging and poor closure that affects performance and sealing.

• Provides the pivot point and structural support for the door or lid
• Helps maintain correct alignment for reliable latching and sealing
• Replaces bent, worn, or broken hinge components
• Common symptoms: door sags, rubs or binds; difficulty closing; visible hinge damage; uneven gaps

• Disconnect power at the breaker; if applicable, shut off gas before servicing
• Support the door, remove mounting screws, and note hinge orientation/shim placement
• Transfer any screws, spacers, or covers from the old hinge to the new one
• Reinstall and check alignment so the door closes flush and seals correctly

This hinge assembly restores smooth, controlled door movement and proper alignment so the door closes flush and latches reliably. Replacing a worn hinge can help eliminate binding, sagging, or gaps that compromise performance.

• Provides the pivot and support point for the door
• Helps keep the door square to the cabinet for consistent latching and sealing
• Restores smooth opening/closing action
• Common failure symptoms include door sagging, rubbing/binding, squeaking, or not staying closed

• Disconnect power to the appliance before servicing
• Support the door to prevent strain on remaining hinges
• Mark orientation, transfer any original spacers/bushings, and reinstall hardware securely
• Verify door alignment and latch operation after installation

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

This replacement access panel cover protects internal components and gives service access for repairs. It restores a finished appearance and helps keep dust and debris out of the appliance while allowing authorized access when needed. What it does:

• Covers and protects internal components behind the panel area
• Keeps out dust, lint, and small debris that can affect performance
• Provides a removable access point for service or part replacement
• Secures to the cabinet to maintain a finished exterior look

• One replacement access panel cover

• Disconnect power (and water if applicable) before beginning any repair
• Remove mounting screws or fasteners and lift cover straight off to avoid bending tabs
• Handle edges carefully; align tabs and fasteners before tightening screws
• Use only the specified replacement part—do not modify part or appliance

This replacement access cover restores the appliance's finished appearance while protecting internal components and controls from dust and debris. It helps keep wiring and small parts secure so the unit operates safely. What it does:

• Protects control assemblies, wiring and internal components from dust, spills and accidental contact
• Restores a secure, finished fit when the original cover is cracked, broken or missing
• Helps prevent loose parts from shifting during use and reduces risk of debris-related issues
• Visible damage, a loose or rattling cover, or gaps around the control area are common signs this part is needed

• One replacement access cover

• Disconnect power (unplug or switch off circuit) before starting any work
• Remove necessary trim or panels to access mounting screws; keep fasteners for reassembly
• Handle plastic clips and tabs gently to avoid breakage; use proper tools (screwdriver, trim tool)

This replacement cover is an access panel that protects internal components and keeps the appliance looking finished. It provides a secure barrier to help prevent debris from entering and allows service access when maintenance is needed. What it does

• Covers and protects internal parts from dust, dirt and incidental contact
• Helps reduce airflow of loose debris into the component area
• Provides a finished exterior appearance after repair or service
• Allows access to controls or components when removed
• Fits where the original factory cover was installed

• One replacement cover

• Disconnect power (and gas if applicable) before starting any repair
• Remove fasteners holding the old cover; keep hardware
• Align cover and reinstall screws until snug; do not overtighten
• Use caution: edges may be sharp and panels may be thin

This replacement cover protects internal components and restores the appliance's finished appearance. It helps keep wiring and parts enclosed for safer operation and reduces dirt and moisture intrusion to prolong component life. What it does:

• Shields internal components and wiring from debris and accidental contact
• Helps reduce rattling or vibration by securing exposed openings
• Restores the appliance's exterior finish where a cover was cracked, warped, or missing
• Supports safe operation by keeping live parts inaccessible

• One replacement cover

• Disconnect power (unplug or switch off breaker) before beginning work
• Remove fasteners from the damaged cover, note screw locations, and save hardware if reusing
• Align new cover, secure with the correct screws, and confirm it sits flush without pinching wires

Replacement shroud that covers and protects internal components, restores the appliance's finished appearance, and helps reduce rattling and minor airflow issues caused by a cracked or missing cover. What it does:

• Protects internal wiring, connectors and components from dust, debris and accidental contact.
• Helps keep panels and components in place to reduce vibration and rattling noises.
• Aids basic airflow direction around enclosed parts to support normal cooling/venting.
• Common symptom indicators: cracked or missing cover, visible exposed components, or increased noise.

• Disconnect power to the appliance before beginning any service.
• Remove trim or outer panels and any retaining screws/clips to access the shroud; basic hand tools are usually required.
• Handle edges carefully—metal/plastic edges can be sharp. Preserve original fasteners for reassembly.

This refrigerator grommet is a small sealing/cushioning insert used where a tube, wire, or component passes through the cabinet or mounts to a panel. It helps keep the opening sealed and protected for reliable operation.

• Seals and cushions an opening or mounting point in the refrigerator cabinet
• Helps prevent water leaks and warm-air infiltration that can lead to frost or moisture
• Reduces chafing, vibration, and wear on tubing or wiring
• Replace if the grommet is cracked, hardened, misshapen, or missing

• Unplug the refrigerator and, if applicable, shut off the water supply
• Access the grommet location by removing any cover or panel as needed
• Remove the old grommet, clean the opening, and press the new grommet fully into place; route the line/wire without kinks
• Restore power (and water, if used) and check for proper sealing and operation

Nylon

The Evaporator Motor Fan Blade is an OEM replacement part for Frigidaire refrigerators. Located inside the refrigerator cavity, the evaporator fan motor and blades work together to circulate cold air throughout the interior. This circulation is crucial for maintaining consistent cooling performance.

Causes of a bad evaporator fan blade can include corrosion or buildup due to humidity, cracks or breaks from harsh vibrations during operation, or imbalance affecting the fan motor.

Symptoms of a bad evaporator fan blade include:

• Warm or lukewarm air inside the refrigerator or freezer sections
• Inconsistent temperatures
• The evaporator fan motor making noises or not spinning smoothly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models. 

The EVAPORATOR FAN MOTOR is an OEM part for Frigidaire refrigerators. It is an electric motor and blade assembly responsible for circulating air across the evaporator case and coils to aid even heat transfer and consistent temperature control. 

Causes of a bad fan motor can include bearing seizure from lack of lubrication, worn windings, or damage from falling debris.

Symptoms of a faulty evaporator fan motor include:  

• Fluctuating or inconsistent refrigerator temperatures
• Frost or ice buildup on evaporator coils or surrounding walls
• Abnormal refrigerator noises during the operation  
• The motor fails to turn on or spin at the proper speed

This OEM Frigidaire replacement fan motor features durable construction and precise electronics to reliably circulate air for efficient, quiet cooling. Replacing a malfunctioning motor helps maintain proper airflow and returns the refrigerator to balanced interior temperatures. 

Compatible with many top-mount, side-by-side, and French door models by brands like Electrolux, KitchenAid, and Kenmore.

This replacement cover protects the appliance's control area and internal components from dust, debris, and accidental contact. It restores a finished appearance and helps keep controls and wiring safely enclosed. What it does

• Shields the control board and wiring from spills, dirt, and everyday wear
• Prevents accidental contact with controls or electrical connections
• Helps maintain a secure fit and finished look to the control area
• Common symptom: cracked, warped, or missing cover exposing internal parts

• One replacement cover

• Disconnect power to the appliance before starting any work
• Remove any trim or screws that hold the old cover in place; many covers use clips—lift gently to avoid breaking tabs
• Align tabs or screw holes on the new cover and secure without overtightening

Replace a cracked or missing cover with this cover assembly. It safeguards internal components and restores a secure, finished fit so the area it protects functions and looks the way it should.

• Shields internal wiring and mechanisms from dust, spills, and accidental contact
• Helps maintain proper coverage and airflow around the protected area
• Secures panels to reduce vibration and rattling
• Replace if cracked, warped, missing, or if mounting tabs are broken and the cover won't stay in place

• Disconnect power to the appliance before servicing
• Retain and reuse original mounting screws/clips unless new hardware is supplied
• Transfer any attached seals, foam, or brackets from the old cover if present
• Align and tighten fasteners evenly; avoid overtightening and verify the cover clears any moving parts before restoring power

Color: White. Used for the upper hinge holes.

The Door Hinge is an OEM part for Frigidaire refrigerators. It is a component that allows the refrigerator door to swing open and closed easily while ensuring a proper seal is maintained each time. The hinge supports the weight of the door and controls its movement into both open and closed positions.

Causes of a bad hinge can include continued normal wear and tear over time, damage from excessive weight or impact, or corrosion that causes mechanisms to freeze up or fail.

Symptoms of a bad hinge include:

• The door not sealing properly when closed
• Difficulty in opening or closing the door
• The door swinging open or closed unintended
• Noise or squeaking coming from the hinge area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

A replacement protective cover that restores the appliance's finished appearance and shields internal components from dirt and accidental contact. Fits where the original trim or access cover was removed or damaged. What it does:

• Protects internal components and wiring from dust, spills, and incidental contact.
• Restores the appliance's exterior finish for a clean, factory look.
• Helps maintain proper airflow and prevents small objects from entering service areas.
• Useful when replacing nearby parts or after service to reseal the access area.

• One replacement cover.

• Remove power (unplug or shut off breaker) before attempting installation to avoid electrical hazard.
• Installation may require removal of adjacent panels or fasteners; keep hardware organized for reassembly.
• Inspect mating surfaces and fasteners for damage and replace any stripped screws.

This refrigerator door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It secures the door to the cabinet and helps the gasket seal correctly for efficient cooling. What it does:

• Supports and pivots the refrigerator door so it opens and closes smoothly
• Keeps the door aligned to maintain a tight seal and consistent internal temperature
• Common fix for a sagging, crooked, or noisy door
• Helps prevent rubbing or catching between the door and cabinet

• Disconnect power and empty or support the door before removing hinge hardware
• Remove any shelves or items that block hinge access to avoid damage
• Tighten mounting screws to manufacturer torque; replace missing/damaged fasteners

This is a replacement door hinge for refrigerators that supports and guides the door for smooth opening and closing. It restores proper door alignment to help maintain an even seal and consistent cooling. What it does:

• Secures the refrigerator door to the cabinet and allows the door to pivot properly
• Restores correct door alignment to reduce gaps that can cause warm air leaks
• Helps eliminate door sag, rubbing, or uneven closing
• Works with factory mounting points so the door seals and operates as designed

• Verify left/right and upper/lower orientation before installing; hinge orientation varies by model
• Use the same mounting screws and positions installed by the manufacturer; do not overtighten fasteners
• Support the door during removal/installation to prevent injury or damage
• Disconnect power to any powered door components (ice maker/water lines not typically affected)

This replacement refrigerator door hinge restores smooth door movement and correct alignment, helping the door close fully and maintain a proper seal to protect food and reduce gaps caused by a sagging door. What it does:

• Supports and pivots the refrigerator door to restore proper opening and closing and stop door sag or droop.
• Realigns the door to help maintain an effective seal and reduce uneven gaps or cold-air leakage.
• Stops grinding, scraping or rough door movement caused by a worn or damaged hinge.
• Provides a direct replacement part to restore normal door operation.

• Disconnect power or unplug the appliance before beginning service to avoid electrical hazards.
• Support the door (have a helper or use a support block) and remove door contents to prevent injury or damage.
• Use appropriate hand tools to remove and install fasteners; align the door before fully tightening hardware.

The Frigidaire refrigerator center door hinge pin is an OEM replacement part responsible for providing stability and allowing the smooth opening and closing of the refrigerator door. It secures the center hinge of the refrigerator door, ensuring proper alignment and movement of the door. The hinge pin is typically located in the center of the refrigerator door, connecting it to the refrigerator cabinet

Causes of a bad pin can include regular wear and tear, corrosion due to exposure to moisture, or physical damage from impact or mishandling.

Symptoms of a bad pin include:

• Loose or misaligned components
• Unusual noises during operation
• Difficulty in opening or closing doors or panels
• Parts not staying securely in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so parts stay aligned and reduces rattling or looseness during operation. What it does:

• Fastens trim, panels or internal components to keep parts securely in place
• Restores proper alignment and prevents gaps that can cause vibration or noise
• Used where original factory screws have become stripped, lost, or damaged
• Matches the factory fit for a reliable, long-lasting hold

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or plastic parts
• Disconnect power and follow appliance safety guidelines before servicing
• Compare head style and thread before installation

A replacement mounting screw used to secure appliance panels, trim, and components. Restores proper fit and helps reduce rattling or movement for a tighter, safer assembly. What it does

• Secures panels, brackets, and trim to keep parts aligned and stable.
• Replaces lost, stripped, or damaged screws that cause loose or vibrating panels.
• Helps prevent gaps that can allow movement or noise during operation.

• Disconnect power and/or gas to the appliance before beginning any repair.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug; avoid over-tightening which can strip threads or damage parts.
• If threads are damaged, replace with the correct OEM screw size and type.

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location