Parts for Frigidaire FFHT2045VB1: Cabinet Parts

This is a bottom right door hinge assembly for refrigerators that supports and guides the door for smooth opening and secure closing. Replaces a worn or damaged hinge to restore proper door alignment and operation. What it does:

• Supports the lower corner of the refrigerator door and bears its weight
• Guides door swing so the door opens and closes smoothly
• Helps maintain proper door alignment and an even seal
• Common symptom: door sagging, dragging, uneven gap, or difficulty closing

• Unplug the appliance and remove contents or secure shelves before starting
• Support the door while removing/installing the hinge to prevent dropping or damage
• Reuse original fasteners if in good condition; replace damaged screws or pins as needed
• Check door alignment after installation and adjust per manufacturer instructions

This hinge assembly restores smooth, controlled door movement and proper alignment so the door closes flush and latches reliably. Replacing a worn hinge can help eliminate binding, sagging, or gaps that compromise performance.

• Provides the pivot and support point for the door
• Helps keep the door square to the cabinet for consistent latching and sealing
• Restores smooth opening/closing action
• Common failure symptoms include door sagging, rubbing/binding, squeaking, or not staying closed

• Disconnect power to the appliance before servicing
• Support the door to prevent strain on remaining hinges
• Mark orientation, transfer any original spacers/bushings, and reinstall hardware securely
• Verify door alignment and latch operation after installation

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

Replacement shroud that covers and protects internal components, restores the appliance's finished appearance, and helps reduce rattling and minor airflow issues caused by a cracked or missing cover. What it does:

• Protects internal wiring, connectors and components from dust, debris and accidental contact.
• Helps keep panels and components in place to reduce vibration and rattling noises.
• Aids basic airflow direction around enclosed parts to support normal cooling/venting.
• Common symptom indicators: cracked or missing cover, visible exposed components, or increased noise.

• Disconnect power to the appliance before beginning any service.
• Remove trim or outer panels and any retaining screws/clips to access the shroud; basic hand tools are usually required.
• Handle edges carefully—metal/plastic edges can be sharp. Preserve original fasteners for reassembly.

This refrigerator grommet is a small sealing/cushioning insert used where a tube, wire, or component passes through the cabinet or mounts to a panel. It helps keep the opening sealed and protected for reliable operation.

• Seals and cushions an opening or mounting point in the refrigerator cabinet
• Helps prevent water leaks and warm-air infiltration that can lead to frost or moisture
• Reduces chafing, vibration, and wear on tubing or wiring
• Replace if the grommet is cracked, hardened, misshapen, or missing

• Unplug the refrigerator and, if applicable, shut off the water supply
• Access the grommet location by removing any cover or panel as needed
• Remove the old grommet, clean the opening, and press the new grommet fully into place; route the line/wire without kinks
• Restore power (and water, if used) and check for proper sealing and operation

Nylon

The Evaporator Motor Fan Blade is an OEM replacement part for Frigidaire refrigerators. Located inside the refrigerator cavity, the evaporator fan motor and blades work together to circulate cold air throughout the interior. This circulation is crucial for maintaining consistent cooling performance.

Causes of a bad evaporator fan blade can include corrosion or buildup due to humidity, cracks or breaks from harsh vibrations during operation, or imbalance affecting the fan motor.

Symptoms of a bad evaporator fan blade include:

• Warm or lukewarm air inside the refrigerator or freezer sections
• Inconsistent temperatures
• The evaporator fan motor making noises or not spinning smoothly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models. 

The EVAPORATOR FAN MOTOR is an OEM part for Frigidaire refrigerators. It is an electric motor and blade assembly responsible for circulating air across the evaporator case and coils to aid even heat transfer and consistent temperature control. 

Causes of a bad fan motor can include bearing seizure from lack of lubrication, worn windings, or damage from falling debris.

Symptoms of a faulty evaporator fan motor include:  

• Fluctuating or inconsistent refrigerator temperatures
• Frost or ice buildup on evaporator coils or surrounding walls
• Abnormal refrigerator noises during the operation  
• The motor fails to turn on or spin at the proper speed

This OEM Frigidaire replacement fan motor features durable construction and precise electronics to reliably circulate air for efficient, quiet cooling. Replacing a malfunctioning motor helps maintain proper airflow and returns the refrigerator to balanced interior temperatures. 

Compatible with many top-mount, side-by-side, and French door models by brands like Electrolux, KitchenAid, and Kenmore.

This replacement cover protects the appliance's control area and internal components from dust, debris, and accidental contact. It restores a finished appearance and helps keep controls and wiring safely enclosed. What it does

• Shields the control board and wiring from spills, dirt, and everyday wear
• Prevents accidental contact with controls or electrical connections
• Helps maintain a secure fit and finished look to the control area
• Common symptom: cracked, warped, or missing cover exposing internal parts

• One replacement cover

• Disconnect power to the appliance before starting any work
• Remove any trim or screws that hold the old cover in place; many covers use clips—lift gently to avoid breaking tabs
• Align tabs or screw holes on the new cover and secure without overtightening

Replace a cracked or missing cover with this cover assembly. It safeguards internal components and restores a secure, finished fit so the area it protects functions and looks the way it should.

• Shields internal wiring and mechanisms from dust, spills, and accidental contact
• Helps maintain proper coverage and airflow around the protected area
• Secures panels to reduce vibration and rattling
• Replace if cracked, warped, missing, or if mounting tabs are broken and the cover won't stay in place

• Disconnect power to the appliance before servicing
• Retain and reuse original mounting screws/clips unless new hardware is supplied
• Transfer any attached seals, foam, or brackets from the old cover if present
• Align and tighten fasteners evenly; avoid overtightening and verify the cover clears any moving parts before restoring power

The Door Hinge is an OEM part for Frigidaire refrigerators. It is a component that allows the refrigerator door to swing open and closed easily while ensuring a proper seal is maintained each time. The hinge supports the weight of the door and controls its movement into both open and closed positions.

Causes of a bad hinge can include continued normal wear and tear over time, damage from excessive weight or impact, or corrosion that causes mechanisms to freeze up or fail.

Symptoms of a bad hinge include:

• The door not sealing properly when closed
• Difficulty in opening or closing the door
• The door swinging open or closed unintended
• Noise or squeaking coming from the hinge area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This refrigerator door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It secures the door to the cabinet and helps the gasket seal correctly for efficient cooling. What it does:

• Supports and pivots the refrigerator door so it opens and closes smoothly
• Keeps the door aligned to maintain a tight seal and consistent internal temperature
• Common fix for a sagging, crooked, or noisy door
• Helps prevent rubbing or catching between the door and cabinet

• Disconnect power and empty or support the door before removing hinge hardware
• Remove any shelves or items that block hinge access to avoid damage
• Tighten mounting screws to manufacturer torque; replace missing/damaged fasteners

The Frigidaire refrigerator center door hinge pin is an OEM replacement part responsible for providing stability and allowing the smooth opening and closing of the refrigerator door. It secures the center hinge of the refrigerator door, ensuring proper alignment and movement of the door. The hinge pin is typically located in the center of the refrigerator door, connecting it to the refrigerator cabinet

Causes of a bad pin can include regular wear and tear, corrosion due to exposure to moisture, or physical damage from impact or mishandling.

Symptoms of a bad pin include:

• Loose or misaligned components
• Unusual noises during operation
• Difficulty in opening or closing doors or panels
• Parts not staying securely in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location