Need Help?
Call or text
Show parts
A fastening component used throughout various appliances to secure panels, components, and assemblies in place. Replace when screws become stripped, corroded, or lost during appliance maintenance or repair.
This part is discontinued by the manufacturer and is no longer available for purchase.
Evaporator cover for refrigerators. Installs over the evaporator coil in the freezer compartment. Replace if cracked, broken, or missing.
Usually ships within 4 - 14 days
Mounting bracket that secures shelves and internal components in your refrigerator. Replace if cracked, broken, or missing to keep shelves stable and prevent shifting.
The Freezer Shelf is an OEM replacement part for GE freezers. This shelf provides storage throughout the freezer compartment. It measures approximately. 25" x 12". Causes of a bad freezer shelf can include cracked or broken steel from overloading, corrosion from moisture exposure over years of use, or damage from impact. Symptoms of a faulty shelf include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This glass shelf reflector sits behind refrigerator shelves to reflect light and improve interior visibility. It helps distribute LED or fluorescent lighting evenly throughout the compartment for better food visibility. Replace if the reflector is cracked, discolored, or missing, causing dark spots or poor lighting in your refrigerator.
Shelf Frame only, Glass not included
Replacement meat pan drawer for the fresh food section. Restores organized storage when original is cracked, broken, or missing. Slides into shelf rails.
Clear lower crisper drawer for refrigerator vegetable storage. Replace your cracked, broken, or missing drawer to restore organized produce storage.
The Vegetable Pan Cover is an OEM replacement part for GE refrigerators. This transparent cover fits over the vegetable/crisper drawers, helping to maintain the ideal humidity levels and keep produce fresh for longer periods. The pan measures approximately 24 inches wide by 19 inches deep.
Symptoms of a bad vegetable pan cover include:
Causes of needing to replace the vegetable pan cover can range from physical damage due to impact or mishandling, to general wear and tear over time that can cause warping or degradation of the plastic material.
Leveling leg threads into the refrigerator base to support and stabilize the cabinet. Replace if cracked, broken, or worn to keep your unit level.
Rear mobility wheel mounts to the back base of your refrigerator. Replace if worn, cracked, or causing uneven rolling when moving the unit for cleaning.
The GE access cover is an OEM replacement part responsible for covering the compressor area on a refrigerator. This panel is located on the rear or bottom of the refrigerator and provides easy access to the compressor and condenser coils and prevents dirt and debris from entering the compressor area. When this part becomes damaged, it can lead to issues such as poor cooling performance, excessive noise from the compressor area, or even compressor overheating.
Symptoms of a bad access cover include:
Causes of a bad access cover can include accidental impacts, wear and tear from frequent removal and reinstallation, and environmental factors like temperature fluctuations or moisture exposure.
The axle assembly that supports the front wheels of your refrigerator, allowing it to roll smoothly during movement. Replace if the refrigerator is difficult to move, wheels wobble or fall off, or the unit sits unevenly.
Rear rail support plate for refrigerators. Mounts inside the cabinet to support shelving rails. Replace if cracked, broken, or missing for stability.
White plastic corner cap that snaps onto refrigerator door corners to conceal fasteners and protect hinge areas. Replace if cracked, broken, or missing.
Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.
Replace your refrigerator door hinge if cracked, bent, or broken. Secures door to cabinet and allows smooth opening and closing. Direct fit part.
Positions refrigerator door components with correct clearance for smooth swinging and level alignment. Replace if worn, cracked, or missing to restore fit.
Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.
Left-hand support gusset plate for top-mount refrigerators. Replaces cracked, broken, or missing structural brackets that secure internal components.
Replace the right-hand mounting gusset bracket in your top-mount refrigerator. Needed when the original bracket is cracked, broken, or missing.
This ice maker receptacle cover protects the electrical connector and housing where the ice maker plugs into the refrigerator, helping keep the connection clean and secure for reliable ice maker operation. What it does
Insulating foam duct that directs cold air from the evaporator through the fresh food compartment. Replace if cracked, compressed, or missing.
Replacement freezer air duct for your refrigerator. Directs cold air from the evaporator into the freezer compartment. Replace if cracked or broken.
Insulation foam that protects electrical components in your top-mount refrigerator. Replace if cracked, deteriorated, or missing to maintain proper coverage.
Air duct gasket seals the air passage in your refrigerator to maintain proper airflow and temperature. Replace if torn, compressed, or causing cooling issues.
Replace your broken, chipped, or missing refrigerator cantilever half-glass shelf. Restores storage space and organization inside your fridge.
Replacement glass shelf for refrigerator storage compartments. Restores a level surface for food and containers when original is cracked, broken, or missing.
The reflector glass shelf is a transparent storage surface located inside your refrigerator compartment that provides a clean, easy-to-wipe platform for food items. This tempered glass shelf reflects light to improve interior visibility while supporting the weight of stored products. Replace if the shelf is cracked, shattered, or has chips that could contaminate food.
Replacement mounting screw for refrigerator interior components. Needed when original hardware is stripped, missing, or damaged during repairs or maintenance.
Refrigerator not cooling evenly or making noise? The evaporator fan blade circulates cold air. Simple press-on installation in under 30 minutes.
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Size: 10-16 ab.
Hex washer head screw for refrigerator assembly. Secures internal components like fan housings and panels. Replace if stripped, missing, or damaged.
Secures brackets, panels, trim, and covers inside your refrigerator. Replace this screw if stripped, missing, or damaged to restore tight assembly.
This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:
Replace missing or stripped mounting screws in your refrigerator. This screw secures internal components and panels. Essential for reassembly after repairs.