Parts for Ge GHWS8355H0MC: Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This harness cover is a replacement protective housing that shields the appliance's wiring and connectors from abrasion and incidental contact, helping preserve safe, reliable electrical connections. What it does:

• Covers and protects the wire harness and connector area from rubbing, pinching, and incidental contact
• Helps prevent insulation damage that can lead to exposed wires or arcing
• Common signs a cover is needed: visible frayed or melted insulation, exposed wires, or intermittent power/connectivity to components
• Conserves the routing of wires to reduce snagging during panel removal or maintenance

• Disconnect all power (unplug appliance or shut off breaker) before servicing to avoid shock or damage
• Access may require removal of the appliance back or access panel; keep fasteners organized for reassembly
• Position cover over the harness and secure to the mounting points; do not force or crimp wiring when re-routing
• If wiring or connectors show damage, replace the wiring harness rather than reusing damaged components

Replacement water inlet hose for your washer. Connects water supply to the machine. Replace if cracked, leaking, brittle, or damaged to restore proper fit.

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

This front support leg provides stable, level support for the appliance's front end to reduce rocking and maintain proper alignment. It restores correct height and helps doors/drawers close properly. What it does:

• Replaces a worn or damaged front support leg to stop rocking or leaning
• Restores even contact with the floor for safer operation and reduced vibration
• Helps correct door or drawer alignment caused by a sagging front
• Works as a direct-fit replacement when the original front leg is broken or missing

• One front support leg

• Disconnect power and water before starting any repair
• Support the appliance securely or tip it per the manufacturer's service instructions
• Remove any trim or brackets needed to access the front leg; use hand tools as required
• Re-check level and stability after installation; test operation before regular use

Size: 8 - 18 ab.

Plastic retainer that secures the spring/clip assembly on your washer. Replace if cracked, broken, or missing to keep moving parts aligned properly.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Connects the door to the hinge for smooth pivoting and proper alignment. Replace if door movement is loose or seal is compromised. Verify fit with model.

This upper ball socket is the pivot socket that supports a dryer suspension rod, helping the drum stay aligned and rotate smoothly. Replaces a worn or broken socket to reduce noise, wobble, or uneven drum movement. What it does:

• Provides a secure pivot point for the dryer's suspension rod or support shaft
• Keeps the drum centered and helps maintain smooth rotation
• Worn or cracked sockets can cause noise, rubbing, or drum misalignment
• Works with the matching lower socket and suspension components to stabilize the drum

• Disconnect power and gas before starting any repair
• Use basic hand tools; remove the front panel or bulkhead to access the suspension rod as needed
• Inspect suspension rod and lower socket; replace any worn mating parts to ensure proper function

Replacement foot and base assembly for your washer. Installs at the bottom to provide stable leveling support. Needed when original is cracked or broken.

Fix washer not cleaning properly or spray issues with this recirculation pump assembly. Pumps water through wash system. Moderate DIY repair.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

A replacement hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable clip designed for use on water, drain or vent hoses in compatible appliances. What it does

• Holds hose to barb or spud to reduce slipping and leaks
• Restores a secure connection when a clamp is missing, damaged or loose
• Helps stop intermittent leaking or vibration-related noise from a loose hose
• Works with flexible rubber or plastic tubing used in refrigerators, dishwashers or washers

• One hose clamp

• Turn off and unplug the appliance and shut off water supply before working
• Slide clamp over hose, seat hose on fitting, then tighten or compress clamp until secure
• Use appropriate pliers or screwdriver for the clamp style; avoid over-tightening
• After installation, restore power/water and check the connection for leaks

This clamp secures a flexible hose or tubing to a fitting to prevent leaks and movement. It's a small but important fastener that helps keep water and air connections tight and stable. What it does:

• Holds a hose or tube firmly to a nipple or barb to prevent leaks
• Keeps lines routed and secured to reduce rubbing and vibration
• Prevents hoses from slipping off during operation, which can cause water or air loss
• Commonly used on drain, inlet, or vent hoses where a tight seal is required

• One clamp

• Disconnect power and shut off water before servicing the appliance
• Use appropriate pliers or a screwdriver for installation; avoid overtightening which can damage the hose
• Inspect the hose and fitting for damage; replace any cracked or worn hoses for a reliable seal

Fix leaking or puddles under your washer by replacing a cracked or kinked drain hose. Directs wastewater during drain cycles. Easy DIY installation.

This standpipe bracket secures the appliance's drain standpipe or hose assembly, keeping the drain connection stable for reliable water flow and reducing strain that can cause leaks or disconnections. What it does:

• Holds the drain standpipe or drain hose in the correct position to maintain uninterrupted drainage
• Prevents the standpipe/hose from shifting, kinking, or pulling loose during cycles
• Helps reduce leaks and water spills caused by a loose or misaligned drain connection
• Supports proper appliance drainage which can prevent backup or slow-drain symptoms

• Disconnect power and shut off the water supply before starting work
• Remove the required access panels to reach the drain standpipe area
• Secure the bracket per OEM guidance; use appropriate fasteners and avoid overtightening

Secures your washer's drain hose to the standpipe or laundry tub. Replace if cracked, broken, or missing to keep hose positioned and prevent dislodging.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.