Parts for Ge GPV10FGNBBB: Cabinet Parts

Left leveling leg for refrigerators. Supports and levels your appliance for proper door alignment. Replace if cracked, broken, or missing.

Right-side leveling leg for refrigerators. Installs at the front or rear corner to adjust height and stability. Replace if cracked, broken, or missing.

This terminal block mounting plate secures the appliance's electrical terminal block to the cabinet, keeping wire connections stable and aligned for reliable power delivery. A straightforward replacement that restores proper terminal support. What it does:

• Provides a stable mounting surface for the appliance terminal block and attached wiring
• Keeps electrical connections aligned to prevent loose or shifted terminals
• Helps eliminate intermittent power or connection-related failures caused by a damaged or missing mount
• Works with the appliance's existing terminal block and fasteners to restore original fit

• Disconnect power at the breaker or unplug the appliance before servicing
• Replace only with the same style mounting plate to maintain proper terminal alignment
• Retain or use the original screws/fasteners unless replacements are specified

This DC fan motor and blade assembly circulates air inside the appliance to help maintain proper cooling and airflow. Replaces worn or failed fans to restore quiet, consistent air movement and temperature control. What it does:

• Spins the fan blade to move air through evaporator/condenser compartments
• Restores airflow when the original fan is noisy, slow, or not running
• Helps prevent uneven temperatures and frost build-up caused by poor circulation
• Works as the motorized airflow component in compatible refrigeration appliances

• One DC fan motor and blade assembly

• Disconnect power before servicing to avoid electrical shock
• Handle the fan blade carefully to avoid bending or damage
• Confirm connector orientation and secure wiring; do not force connectors

Fix refrigerator cooling issues with this access valve. Used to service the sealed refrigeration system. Essential component for professional repairs.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This grounding wire is an exact-replacement electrical ground connection used to restore a safe, reliable chassis/ground path on appliances. It helps reduce shock risk and ensures proper grounding for electrical components. What it does:

• Provides a dedicated ground path between appliance chassis and circuit ground
• Restores proper grounding after damage, corrosion, or during part replacement
• Helps stop intermittent electrical faults caused by a missing or loose ground
• Supports safe operation of switches, controls, and motors by maintaining chassis potential

• One grounding wire assembly

• Disconnect power before inspecting or replacing any electrical wiring
• Confirm mounting points and terminal orientation match the original before fastening
• Use appropriate hand tools; secure terminals and strain reliefs to avoid wire chafing
• Replace damaged components and verify ground continuity with a multimeter

This upper hinge cover is a molded trim piece that snaps over the refrigerator's top door hinge to protect the hinge, hide hardware and restore a finished appearance. It replaces cracked, broken or missing hinge trim for a cleaner door look. What it does:

• Covers and protects the top door hinge from dirt and damage
• Conceals hinge screws and hardware for a finished appearance
• Helps prevent snagging or sharp edges from a damaged hinge area
• Commonly replaced when the cover is cracked, split or missing

• One upper hinge cover

• Disconnect power to the appliance before starting any repairs when required by the appliance manufacturer
• Support or secure the door before removing hinge fasteners to prevent tipping or injury
• Remove hinge screws, replace the cover, then reassemble and verify door alignment
• Use basic hand tools; keep existing hinge hardware unless explicitly specified otherwise

This cross-recessed hexagon bolt secures appliance components where a low-profile, cross-drive head and hex socket are required, restoring fit and preventing rattles or loose parts. Simple replacement for a single fastener. What it does:

• Fastens panels, brackets, or assemblies to hold parts securely in place.
• Stops vibration-related noise or movement caused by a loose or worn bolt.
• Provides a reliable drive profile for a screwdriver or bit to tighten or remove.
• Used wherever the appliance design specifies a cross-recessed hexagon head fastener.

• One hexagon bolt (cross-recessed) — only the bolt shown.

• Disconnect power and water before servicing to avoid shock or injury.
• Match the bolt location and orientation; hand-start threads to avoid cross-threading.
• Tighten snugly but do not overtighten — excessive force can strip threads or damage components.
• Use the correct screwdriver/bit size for a clean engagement with the cross recess.

Refrigerator not cooling properly or running constantly? This thermostat control box regulates temperature cycles. Moderate difficulty repair in 1-2 hours.

Replace your dim or burned-out refrigerator interior LED light bulb to restore bright, energy-efficient illumination. Verify fit with your model number.

Fixes inconsistent cooling and temperature swings in your refrigerator. This thermostat regulates compressor cycling to maintain stable cold temperatures.

This is a control knob that attaches to the cold control thermostat inside the refrigerator, allowing you to adjust the temperature setting. It typically mounts on the thermostat shaft inside the fresh food compartment. Replace this knob if it is cracked, broken, or no longer grips the thermostat shaft properly, making it difficult to change the temperature.

This lamp shade is the glass light cover that protects and diffuses the appliance light bulb, restoring even interior lighting and keeping the bulb shielded from spills or debris. It replaces a cracked, chipped or missing light cover. What it does:

• Protects the interior light bulb from contact with food, moisture and debris
• Diffuses and softens the appliance light for more even illumination
• Stops rattling or loose fit when the original shade is broken or worn
• Helps prevent direct bulb exposure that can lead to faster bulb soiling

• One lamp shade / light cover

• Ensure the appliance is powered off and bulb is cool before handling
• Handle the glass carefully; wear gloves to prevent cuts and fingerprints
• Seat the shade into its mounting position and secure per the appliance's original clips or retaining hardware
• Use only the correct replacement bulb and do not force the shade into place

Clear crisper drawer for top-mount refrigerators. Replaces cracked, broken, or missing produce drawers. Restores organized storage for fruits and vegetables.

Fix a refrigerator that won't cool or won't run with this inverter control board. Powers and controls the compressor for consistent cooling performance.