Parts for Ge GTWS8455D0MC: Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This harness cover is a replacement protective housing that shields the appliance's wiring and connectors from abrasion and incidental contact, helping preserve safe, reliable electrical connections. What it does:

• Covers and protects the wire harness and connector area from rubbing, pinching, and incidental contact
• Helps prevent insulation damage that can lead to exposed wires or arcing
• Common signs a cover is needed: visible frayed or melted insulation, exposed wires, or intermittent power/connectivity to components
• Conserves the routing of wires to reduce snagging during panel removal or maintenance

• Disconnect all power (unplug appliance or shut off breaker) before servicing to avoid shock or damage
• Access may require removal of the appliance back or access panel; keep fasteners organized for reassembly
• Position cover over the harness and secure to the mounting points; do not force or crimp wiring when re-routing
• If wiring or connectors show damage, replace the wiring harness rather than reusing damaged components

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

This front support leg provides stable, level support for the appliance's front end to reduce rocking and maintain proper alignment. It restores correct height and helps doors/drawers close properly. What it does:

• Replaces a worn or damaged front support leg to stop rocking or leaning
• Restores even contact with the floor for safer operation and reduced vibration
• Helps correct door or drawer alignment caused by a sagging front
• Works as a direct-fit replacement when the original front leg is broken or missing

• One front support leg

• Disconnect power and water before starting any repair
• Support the appliance securely or tip it per the manufacturer's service instructions
• Remove any trim or brackets needed to access the front leg; use hand tools as required
• Re-check level and stability after installation; test operation before regular use

Size: 8 - 18 ab.

This clip spring cover is a small plastic retainer that secures the spring/clip assembly on compatible appliances, helping keep moving parts aligned and reducing rattles or loose components. Replaces a worn or broken cover to restore proper fit. What it does

• Covers and holds a spring or clip in place to prevent displacement during operation
• Keeps assemblies aligned to reduce noise and intermittent part contact
• Helps maintain consistent tension where a spring or clip is used
• Commonly replaced when the original cover is cracked, broken, or missing

• One clip spring cover

• High-level replacement; basic hand tools may be required to access the location
• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Inspect adjacent springs/clips for wear and replace if damaged

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This upper door ball joint connects the refrigerator door to the hinge, allowing smooth pivoting and proper door alignment. Replacing a worn or damaged ball joint restores secure door movement and helps maintain a tight seal. What it does:

• Provides a pivot point between the door and top hinge for smooth opening and closing
• Keeps the door aligned to prevent rubbing, sagging, or uneven gaps
• Helps the door seal correctly to preserve internal temperature
• Commonly replaced when the door feels loose, binds, or the joint shows visible wear

• Disconnect power to the appliance before starting any repair
• Typically accessed from the top hinge area after removing the hinge cover and/or door as required
• Use basic hand tools; support the door to prevent damage while replacing the joint

This upper ball socket is the pivot socket that supports a dryer suspension rod, helping the drum stay aligned and rotate smoothly. Replaces a worn or broken socket to reduce noise, wobble, or uneven drum movement. What it does:

• Provides a secure pivot point for the dryer's suspension rod or support shaft
• Keeps the drum centered and helps maintain smooth rotation
• Worn or cracked sockets can cause noise, rubbing, or drum misalignment
• Works with the matching lower socket and suspension components to stabilize the drum

• Disconnect power and gas before starting any repair
• Use basic hand tools; remove the front panel or bulkhead to access the suspension rod as needed
• Inspect suspension rod and lower socket; replace any worn mating parts to ensure proper function

This hose clamp kit secures the washer's hoses at the pump, tub, or valve connections, helping stop leaks and hose blow-offs. Replace worn or missing clamps to restore a tight, reliable seal during fill, wash, and drain.

• Secures drain, pump, and fill hoses to fittings to maintain a watertight seal
• Helps prevent drips, leaks, and hoses slipping off during vibration
• Replaces clamps that are rusted, stripped, deformed, or missing
• Common symptoms: water leaking at hose joints, loose hose connections, clamp won't tighten
• Useful when installing a new hose, pump, or valve

• Unplug the washer and turn off water supplies; have towels or a pan ready for residual water
• Release and remove old clamps; seat the hose fully over the fitting before installing new clamps
• Tighten evenly and do not overtighten to avoid hose or fitting damage
• Restore power and water, then run a short cycle to check for leaks at each connection

A replacement hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable clip designed for use on water, drain or vent hoses in compatible appliances. What it does

• Holds hose to barb or spud to reduce slipping and leaks
• Restores a secure connection when a clamp is missing, damaged or loose
• Helps stop intermittent leaking or vibration-related noise from a loose hose
• Works with flexible rubber or plastic tubing used in refrigerators, dishwashers or washers

• One hose clamp

• Turn off and unplug the appliance and shut off water supply before working
• Slide clamp over hose, seat hose on fitting, then tighten or compress clamp until secure
• Use appropriate pliers or screwdriver for the clamp style; avoid over-tightening
• After installation, restore power/water and check the connection for leaks

This clamp secures a flexible hose or tubing to a fitting to prevent leaks and movement. It's a small but important fastener that helps keep water and air connections tight and stable. What it does:

• Holds a hose or tube firmly to a nipple or barb to prevent leaks
• Keeps lines routed and secured to reduce rubbing and vibration
• Prevents hoses from slipping off during operation, which can cause water or air loss
• Commonly used on drain, inlet, or vent hoses where a tight seal is required

• One clamp

• Disconnect power and shut off water before servicing the appliance
• Use appropriate pliers or a screwdriver for installation; avoid overtightening which can damage the hose
• Inspect the hose and fitting for damage; replace any cracked or worn hoses for a reliable seal

This washer drain hose carries used water from the drain pump to your home standpipe or laundry sink. Replacing a cracked, kinked, or leaking hose restores proper draining and helps prevent puddles and water damage.

• Directs wastewater from the washer during drain and spin cycles
• Replaces a hose that is split, brittle, kinked, or clogged
• Symptoms can include slow or no draining, water leaks during drain, or water left in the tub
• Visible wear or punctures on the hose indicate replacement is needed

• Unplug the washer and turn off water; pull the unit forward for access
• Expect residual water—use towels or a shallow pan
• Move the hose at the drain pump outlet and route to the standpipe or sink; secure with existing clamp/retainer
• Ensure a smooth, unkinked run with a proper high loop; test a drain cycle and check for leaks

This standpipe bracket secures the appliance's drain standpipe or hose assembly, keeping the drain connection stable for reliable water flow and reducing strain that can cause leaks or disconnections. What it does:

• Holds the drain standpipe or drain hose in the correct position to maintain uninterrupted drainage
• Prevents the standpipe/hose from shifting, kinking, or pulling loose during cycles
• Helps reduce leaks and water spills caused by a loose or misaligned drain connection
• Supports proper appliance drainage which can prevent backup or slow-drain symptoms

• Disconnect power and shut off the water supply before starting work
• Remove the required access panels to reach the drain standpipe area
• Secure the bracket per OEM guidance; use appropriate fasteners and avoid overtightening

Secure your washer's drain hose with this drain hose strap. It keeps the hose positioned at the standpipe or laundry tub, helping prevent movement, dislodging, and messy leaks when vibration increases during drain and spin cycles.

• Secures the drain hose to a standpipe or utility sink, per installation guidelines
• Helps prevent the hose from backing out or spraying water during operation
• Reduces strain and kinking by keeping the hose routed in place
• Replaces a missing, cracked, or broken strap

• Unplug the washer and turn off water supply before starting
• Position the drain hose in the standpipe or tub and tighten the strap to secure it without kinking the hose
• Maintain the manufacturer-recommended air gap and hose height per your installation manual
• Run a quick drain/spin to ensure the hose stays secured and there are no leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.