Parts for HRF15N3BGF: Cabinet Parts

The LED Board is an OEM part for GE refrigerators. It contains light-emitting diodes that provide important illumination inside refrigerator and freezer compartments. Proper lighting allows for easily identifying expiration dates and selecting foods stored within.

Symptoms of a faulty LED board include: 

• Dim or unlit interior shelves 
• Strange buzzing or flickering from LED zones
• Inability to clearly see items shelved inside

Causes can involve failing solder joints from temperature fluctuations, micro-cracks in circuitry pathways inhibiting current, or fluid exposure corroding connections over time.

Replacing with this genuine GE LED board ensures consistently bright visibility. It is suited for Hotpoint, RCA, and Kenmore fridge models seeking prolonged LED functionality.
 

This ST3.9 x 12 screw is a small self-tapping fastener used to secure appliance panels and components so parts stay aligned and vibration-free. It replaces missing or damaged screws to restore proper fit and stability. What it does:

• Secures trim, panels, brackets, or small internal components
• Restores proper alignment and fit where a screw is missing or stripped
• Helps stop rattling or movement caused by loose fasteners
• Matches OEM thread and length for correct fastening

• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads straight and drive slowly to prevent cross-threading
• Do not overtighten; snug until secure
• Disconnect power and follow appliance safety guidance before servicing

The Fresh Food Thermistor is an OEM part for GE refrigerators. It monitors and helps regulate the fresh food compartment temperature through precise measurements. Proper cooling and food preservation rely on an accurate thermistor reading.

Causes of failure can be microfractures in the glass bulb from sudden temperature changes, loose wiring connections preventing digital communication over time, or fluid intrusion corroding circuit pathways.

Symptoms of a defective fresh food thermistor include:  

• Inability to maintain a consistent temperature setting  
• Strange odors or icing up inside the fridge
• Temperature display showing an inaccurate readout

Replacing with this genuine GE thermistor restores dependable thermal regulation. Compatible with Hotpoint, RCA, and Kenmore brands, it supports consistent fridge performance.
 

This evaporator fan motor assembly circulates cold air across the refrigerator evaporator coil to maintain even cooling and proper frost control. Replacing a failed fan restores airflow for consistent temperatures and efficient cooling. What it does:

• Spins the fan blade to move cold air from the evaporator into the fresh and freezer compartments.
• Helps prevent frost buildup by maintaining steady airflow across the evaporator coil.
• Commonly linked to symptoms like noisy or vibrating operation, weak or no airflow, and warm spots in the freezer or refrigerator.
• Stops the compressor from overworking by ensuring proper air circulation.

• Disconnect power at the breaker or unplug the appliance before servicing.
• Handle the fan blade and motor carefully to avoid bending blades or damaging the motor shaft.
• Verify mounting orientation and connector fit before final installation; some models require removing interior panels.

A small machine screw used to fasten appliance components where an M5 x 16 metric screw is required. Durable metal construction provides a secure fit for panels, brackets and assemblies that use a metric M5 thread. What it does

• Secures panels, brackets or small assemblies that accept an M5 x 16 machine screw
• Replaces stripped or missing fasteners to restore proper fit and alignment
• Helps prevent vibration and rattling when the correct screw is used
• Commonly used in appliances with metric hardware fastenings

• One M5 x 16 screw

• Verify size (M5 x 16) and thread type before installing to ensure proper fit
• Use the correct driver and moderate torque to avoid stripping the head or threads
• Disconnect power and follow appliance safety guidelines before servicing
• If screw threads are damaged, replace with the correct-size fastener rather than reusing

This door switch assembly detects door open/closed status to control interior lights, fans and dispenser logic. Replaces a worn or failed switch to restore proper light and door-sensing functions. What it does:

• Senses when the appliance door is opened or closed and signals the control for lights and certain components
• Prevents interior light from staying on when the door is closed
• Can stop lights, fans or dispenser functions if the switch fails to register door position
• Common symptoms: interior light won't turn on or off, fan runs unexpectedly, or dispenser/ice functions don't respond

• One door switch assembly

• Disconnect power before servicing to avoid shock or injury
• Handle wiring and connectors carefully; reconnect exactly as removed and verify secure fit
• Test operation after installation by opening/closing the door and checking lights/functions

This sealed refrigerator compressor circulates refrigerant to cool the appliance, restoring proper temperature control when the cooling system fails. Replace a worn compressor to stop warm temperatures and intermittent cooling problems. What it does:

• Compresses and circulates refrigerant through the sealed refrigeration circuit to enable heat exchange.
• Restores consistent cooling when the compressor motor has failed or seized.
• Addresses symptoms such as warm interior temperatures, frequent defrosting, or a refrigerator that runs but does not cool.
• Works as the core sealed unit in refrigeration systems—requires system evacuation and recharge after replacement.

• One sealed refrigerator compressor

• Replacement requires certified HVAC/R service: recover refrigerant, evacuate, and recharge to OEM specifications.
• Disconnect power and follow lockout/tagout procedures before servicing.
• Inspect and replace dryer/receiver and filter-drier as recommended; use proper refrigerant oil and charge amounts per manufacturer.
• Verify electrical connections and test for proper compressor operation after system service.

This is a single ST3.9 x 16 appliance screw used to secure panels, trim and small components. It replaces a lost or damaged fastener so parts stay aligned and appliances operate quietly and safely. What it does

• Fastens small sheet-metal and plastic appliance components.
• Holds control panels, trim, brackets or insulation in place.
• Prevents rattling, misalignment or loose panels caused by missing or worn screws.
• Matches OEM thread size and length for correct fit where specified.

• Use the correct driver and match thread engagement to avoid stripping.
• Start threads carefully and do not overtighten; stop when snug.
• Disconnect power before working on electrical components or panels where wiring is present.
• If replacing multiple fasteners, use the same thread type and length for consistent fit.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This main control board is the appliance's electronic control module that manages cycle selection, timing and communications between user controls and components, restoring proper operation when the original board fails. What it does:

• Controls cycle timing, motor and heater/compressor relays based on selected settings
• Interprets user inputs and communicates with sensors and other modules
• May cause symptoms such as unit not starting, unresponsive controls, incorrect cycles, or error codes when failing
• Replaces a faulty or intermittently working control board to return electronic control to the appliance

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board by the edges and avoid static discharge; use an anti-static strap if available
• Verify connector locations and orientation before disconnecting; take photos to aid reassembly

The Control Board is an OEM component specifically designed for GE refrigerators. Located inside the refrigeration compartment, it regulates the operation of temperature, lighting, ice-making functions, and other critical components.

Symptoms of a failing control board include:

• Erratic temperature fluctuations within the fridge and freezer 
• Inoperable controls with no response to input or touch buttons
• Failure of features like ice production or water dispenser

Causes of failure may involve the accumulation of moisture or liquid spills entering connections over time. Board components can experience wear from the constant powering of circuits during operations. 

Replacing with this genuine GE control board restores full functionality. Compatible with GE top-mount fridge models, it maintains performance standards with sourced circuitry. Backed by OEM quality assurances, this board replacement ensures optimized cooling and usability for the life of the appliance. It is also compatible with Hotpoint and Kenmore sealed system refrigerators.
 

This replacement power cord restores electrical connection for compatible GE home appliances, letting the unit receive safe, reliable power. Use it when the original cord is damaged, worn, or no longer providing power. What it does:

• Replaces a damaged or frayed appliance power cord to restore power delivery
• Provides a secure connection between the appliance and the wall outlet
• Helps eliminate intermittent power loss, burning smell from cord damage, or visible wiring damage
• Prevents unsafe operation caused by exposed or broken conductors

• One replacement power cord

• Always unplug the appliance or disconnect power at the breaker before servicing
• Route the cord and secure any strain reliefs or clamps exactly as the original to prevent wear

This mullion striker is the small door catch that secures an appliance door to the mullion, helping the door close and stay sealed for proper cooling and energy efficiency. Replaces a worn or broken striker to restore reliable door engagement. What it does:

• Provides a positive catch point for the appliance door to latch against the mullion
• Helps keep the door aligned and closed to prevent air leaks and temperature loss
• Reduces door rattle and improves the seal where the door meets the cabinet mullion
• Common symptom fix: stops doors that won't stay fully closed or that pop open slightly

• One mullion striker (single)

• Disconnect power or unplug the appliance before beginning any work
• Remove any trim or mullion cover to access the striker; retain screws for reuse if applicable
• Install in the same orientation as the original; hand-start screws before tightening to avoid stripping