Parts for Ikea K80462148A: Cabinet Parts

A replacement bracket assembly that secures and supports internal appliance components, restoring proper alignment and reducing vibration and rattling. Use this bracket to replace bent, cracked, or broken mounts for a snug, stable fit. What it does:

• Secures and anchors internal panels or assemblies to the cabinet or frame.
• Stops movement that can cause rattling, vibration, or loose panels.
• Replaces bent or broken brackets that cause misalignment or sagging.
• Helps maintain proper fit and operation of the area it supports.

• Disconnect power (and water, if applicable) before beginning any repair.
• Basic hand tools are usually required; you may need to remove surrounding trim or panels to access mounting points.
• Keep original fasteners and note bracket orientation for correct reinstallation; do not overtighten screws.

This bracket assembly secures and supports appliance components to restore proper alignment and reduce movement. It replaces a worn or damaged support bracket to help stop rattling, sagging, or loose-fitting parts. What it does:

• Provides a stable mounting point to hold panels, drawers, or internal components in place
• Restores correct alignment to reduce rubbing, vibration, and noise
• Prevents further wear by replacing cracked or bent supports
• Helps parts operate smoothly by keeping assemblies securely positioned

• Disconnect power to the appliance before beginning any repair
• Remove any obstructing panels or shelves to access the mounting location
• Reuse original fasteners only if they are undamaged; replace missing or stripped hardware
• Align bracket before tightening; do not overtighten screws to avoid cracking the part

This replacement screw secures appliance panels, brackets, and components for a solid, rattle-free fit. Replace stripped, rusted, or missing hardware to restore proper alignment and dependable fastening where this fastener is specified.

• Fastens panels, brackets, trim, or internal parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling noises
• Direct replacement for stripped, rusted, or missing hardware
• Symptoms include loose panels, gaps, or screws that won't tighten

• Disconnect power (and gas/water if applicable) before servicing
• Use the correct driver/bit; hand-start threads to avoid cross-threading
• Replace screws one at a time to maintain alignment
• Snug firmly—do not overtighten into plastic or thin metal

The Evaporator Fan Blade is an OEM component specifically designed for Frigidaire brand refrigerators. This fan blade is located within the evaporator coil assembly and works to circulate cold air throughout the refrigerator compartment. 

Symptoms of a bad fan blade include: 

• Excessive heat buildup inside refrigerator sections
• Inability to sufficiently cool foods or maintain temperatures  
• Vibration or grinding noises emanating from rear wall
• Complete lack of air circulation felt at vents

Causes for replacement include wear and tear of plastic components over many years of constant spinning motion, cracks, or breakage from foreign object interference.

This genuine OEM Frigidaire part is also compatible with some Kelvinator and Admiral models.

The Evaporator Fan Motor is an OEM part for Frigidaire refrigerators. It functions to circulate cold air throughout the refrigerator compartment by drawing air across the evaporator coil. Consistent air circulation helps maintain even temperatures.

Symptoms of a bad evaporator fan motor include inconsistent temperatures inside the refrigerator. Sections may be warmer or colder than expected. Icing or frost patterns could indicate improper air flow as well.  

Causes of a bad evaporator fan motor include:

• Fluctuating temperatures within the refrigerator
• Increased frost or ice buildup  
•  Food not staying chilled as expected  
• Abnormal noises coming from the fan area

This Frigidaire replacement is compatible with some Electrolux, Amana, and Kenmore models too. 

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations

A replacement protective cover that restores the appliance's finished appearance and shields internal components from dirt and accidental contact. Fits where the original trim or access cover was removed or damaged. What it does:

• Protects internal components and wiring from dust, spills, and incidental contact.
• Restores the appliance's exterior finish for a clean, factory look.
• Helps maintain proper airflow and prevents small objects from entering service areas.
• Useful when replacing nearby parts or after service to reseal the access area.

• One replacement cover.

• Remove power (unplug or shut off breaker) before attempting installation to avoid electrical hazard.
• Installation may require removal of adjacent panels or fasteners; keep hardware organized for reassembly.
• Inspect mating surfaces and fasteners for damage and replace any stripped screws.

This replacement screw secures appliance panels and components to restore proper fit and function. A simple fastener that helps stop rattling, loose trim, or misaligned parts when the original screw is missing or damaged. What it does:

• Fastens panels, brackets, trim pieces, or internal components
• Prevents vibration noise and loose parts caused by a missing or stripped screw
• Restores correct alignment and secure mounting of affected parts
• Common service item during panel or component replacements

• Use the matching screw location and thread engagement; do not force into stripped holes
• Tighten snugly but avoid over-torquing to prevent stripping or damage
• Power tools OK for threading; use low torque setting for final tightening
• If original hole is damaged, repair the threads or replace the mounting clip before installing