Parts for Ge PFD95GSPW0DS: Cabinet & Top Panel Parts

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Wi-Fi & Bluetooth control board restores wireless connectivity so your appliance can pair with smart devices and communicate with apps or hubs. It replaces a failed or unresponsive wireless module to re-enable remote monitoring and control. What it does:

• Provides Wi-Fi and Bluetooth radio functions for appliance app connectivity and smart features
• Enables remote diagnostics, notifications, and appliance-to-app communication when supported
• Replaces boards that show no wireless connection, intermittent pairing, or failed network registration
• Works as the appliance's primary wireless interface; does not include separate display or main control board functions

• One Wi-Fi & Bluetooth control board with instructions

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Follow manufacturer instructions for board handling and ESD-sensitive components
• Verify wiring harness connections and antenna leads are secured and routed per OEM guidance

Fixes electrical safety issues and grounding problems in dryers. This ground screw secures the ground wire to the chassis for safe discharge. Easy install.

8-18 hi/lo 5/8

This Leveling Leg is an OEM replacement part for GE washing machines and dryers. It plays an essential role in maintaining the stability and balance of the appliance. This leveling leg is designed to withstand the weight and vibrations of the machine, ensuring it remains level and operates smoothly.

Over time, leveling legs can wear down, become damaged, or lose their ability to adjust properly due to constant vibrations, uneven flooring, or shifting of the appliance. An unbalanced appliance can lead to inefficient operation, increased wear and tear, and potential safety hazards.

Symptoms of a bad Leveling Leg include:

• The appliance is unstable or wobbles during operation.
• Excessive noise or vibration more than usual.
• Difficulty in aligning the appliance level on the floor.
• Visible wear or damage to the leveling leg.
• The appliance tilts or leans to one side.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

Fix a dryer that won't power up or start with this main control board. Common solution for complete power failure. Includes installation instructions.

This access panel covers the service opening to protect internal components and allow safe access for diagnostics and repairs. It restores a clean exterior finish and helps keep dust and debris out of the appliance. What it does:

• Covers the service/service access opening so controls and components stay protected
• Provides a safe access point to inspect or replace internal parts
• Helps prevent dust, lint, and small objects from entering the appliance interior
• Restores the appliance's exterior appearance after servicing

• Disconnect power (and gas, if applicable) before removing or installing the panel
• Typical installation uses basic hand tools (screwdriver); keep fasteners from the original panel
• Wear gloves to avoid injury from sheet metal edges

This small replacement panel clip secures a trim or cabinet panel to the appliance, restoring proper fit and preventing gaps or movement for a cleaner appearance and quieter operation. What it does

• Holds a trim or cabinet panel in place to maintain alignment and fit
• Prevents panel rattling or vibration during normal operation
• Replaces broken or missing clips that cause loose or sagging panels
• Helps maintain a finished look and keeps panels from shifting

• One panel clip

• Disconnect power or follow safety lockout procedures before removing panels near electrical components
• Remove the affected trim or panel per the manufacturer service instructions to access clip locations
• Clip typically installs by snapping or pressing into the panel or cabinet; replace all damaged clips for uniform fit

Front top panel for dryers in dark slate finish. Covers internal components and provides a finished appearance. Replace if cracked, dented, or scratched.

Fix a dryer that won't start or power on with a new power cord. Connects your dryer to the wall outlet for safe electrical operation. Easy install.

Size: 8 - 18 ab.

Exposed wiring at terminal block? This safety cover shields high-voltage connections from accidental contact. Restores factory protection in minutes.

This main wiring harness routes power and control signals between the range/oven control system and the gas components, helping the appliance ignite and regulate burners and the oven safely. Replaces a worn or damaged gas harness. What it does

• Connects the control board/clock to gas valves, igniters, and sensors so burners and oven ignition operate.
• Transmits power and low-voltage signals required for timed ignition and safety interlocks.
• A damaged harness can cause burners or oven not to ignite, intermittent heating, or control-related error codes.
• Restores reliable electrical paths when insulation, terminals, or wiring are broken or corroded.

• One main wiring harness (gas) as shown.

• Disconnect electrical power and shut off the gas supply before starting work.
• Handle connectors carefully; match keyed plugs and route harness to avoid pinching or contact with hot surfaces.
• Inspect terminals and mounting clips; replace any damaged fasteners to prevent chafing.