Parts for Ge PFD95GSPT0DS: Cabinet & Top Panel Parts

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Wi-Fi & Bluetooth control board restores wireless connectivity so your appliance can pair with smart devices and communicate with apps or hubs. It replaces a failed or unresponsive wireless module to re-enable remote monitoring and control. What it does:

• Provides Wi-Fi and Bluetooth radio functions for appliance app connectivity and smart features
• Enables remote diagnostics, notifications, and appliance-to-app communication when supported
• Replaces boards that show no wireless connection, intermittent pairing, or failed network registration
• Works as the appliance's primary wireless interface; does not include separate display or main control board functions

• One Wi-Fi & Bluetooth control board with instructions

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Follow manufacturer instructions for board handling and ESD-sensitive components
• Verify wiring harness connections and antenna leads are secured and routed per OEM guidance

The Ground Screw is an OEM part for GE dryers. It ensures proper grounding and electrical safety for your dryer. This screw securely connects the ground wire to the dryer chassis, providing a path for electrical current to safely discharge in the event of a fault or power surge.

A bad Ground Screw can lead to electrical issues and potential safety hazards. Causes of a bad Ground Screw can include corrosion, loose connections, or damage due to accidental mishandling or improper installation.

Symptoms of a bad Ground Screw include:

• Intermittent dryer operation
• Visible signs of damage or deterioration on the screw or ground wire
• Tripped circuit breakers or blown fuses

Replace your faulty or damaged Ground Screw with this genuine OEM GE part to ensure proper grounding and electrical safety for your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

8-18 hi/lo 5/8

This Leveling Leg is an OEM replacement part for GE washing machines and dryers. It plays an essential role in maintaining the stability and balance of the appliance. This leveling leg is designed to withstand the weight and vibrations of the machine, ensuring it remains level and operates smoothly.

Over time, leveling legs can wear down, become damaged, or lose their ability to adjust properly due to constant vibrations, uneven flooring, or shifting of the appliance. An unbalanced appliance can lead to inefficient operation, increased wear and tear, and potential safety hazards.

Symptoms of a bad Leveling Leg include:

• The appliance is unstable or wobbles during operation.
• Excessive noise or vibration more than usual.
• Difficulty in aligning the appliance level on the floor.
• Visible wear or damage to the leveling leg.
• The appliance tilts or leans to one side.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This access panel covers the service opening to protect internal components and allow safe access for diagnostics and repairs. It restores a clean exterior finish and helps keep dust and debris out of the appliance. What it does:

• Covers the service/service access opening so controls and components stay protected
• Provides a safe access point to inspect or replace internal parts
• Helps prevent dust, lint, and small objects from entering the appliance interior
• Restores the appliance's exterior appearance after servicing

• Disconnect power (and gas, if applicable) before removing or installing the panel
• Typical installation uses basic hand tools (screwdriver); keep fasteners from the original panel
• Wear gloves to avoid injury from sheet metal edges

This small replacement panel clip secures a trim or cabinet panel to the appliance, restoring proper fit and preventing gaps or movement for a cleaner appearance and quieter operation. What it does

• Holds a trim or cabinet panel in place to maintain alignment and fit
• Prevents panel rattling or vibration during normal operation
• Replaces broken or missing clips that cause loose or sagging panels
• Helps maintain a finished look and keeps panels from shifting

• One panel clip

• Disconnect power or follow safety lockout procedures before removing panels near electrical components
• Remove the affected trim or panel per the manufacturer service instructions to access clip locations
• Clip typically installs by snapping or pressing into the panel or cabinet; replace all damaged clips for uniform fit

This steam valve controls steam delivery to the appliance's steam system, restoring proper steam function for cycles that use steam. Replaces a failed or leaking steam control valve to help re-enable steam cleaning or refresh cycles. What it does:

• Opens and closes to allow steam or water into the steam generator when the cycle calls for it
• Restores steam production when a faulty valve prevents steam generation
• Stops flow to prevent leaks when the valve fails to seal
• Works with the machine's control system to time steam delivery during cycles

• Disconnect power and water supply before starting any repair
• Handle connectors and hoses carefully; inspect seals and replace gaskets if damaged
• Typical installation requires removing access panels and unplugging electrical connectors; secure wiring and plumbing before testing

The Top Panel is an OEM part for GE dryers. Located at the top front of the dryer, this panel protects internal components while contributing to the dryer's aesthetic appearance. It is responsible for maintaining proper venting while shielding users from any exposed edges or surfaces. 

Symptoms of a bad top panel include:

• Cracks, breaks, or bending from impact or age
• Loose or improper fitting that allows air leaks
• Missing or damaged seal that reduces drying effectiveness
• Surface deterioration or discoloration affecting appearance

Causes can be normal wear and tear, repeated cleaning, or impacts over time. Venting lint buildup not cleaned regularly could also cause overheating and damage.

This genuine GE replacement restores your dryer's structural integrity and venting performance for optimal airflow. This GE part is compatible with Hotpoint, RCA, and select Kenmore dryer models.

The Power Cord is an OEM part for GE dryers. As the connection provides power to the dryer, the cord requires durability and safety. It is responsible for safely transferring the appropriate current from the wall outlet to internal components for smooth, reliable operation cycle after cycle.

Symptoms of a bad power cord include:

• Loose, frayed, or damaged outer insulation exposing wires  
• Discoloration, cracking, or brittleness of the outer sheath over time
• An open or intermittent connection causing intermittent operation
• Tripping of circuit breakers during use

Causes can be normal wear and tear as cords flex repeatedly over years of use. Rodent chewing, kinking or crush damage could also potentially compromise insulation. 

This part is compatible with select Hotpoint, RCA, and Kenmore dryers.

Size: 8 - 18 ab.

This terminal block cover protects the appliance's electrical terminal block by enclosing wiring connections to reduce exposure and help prevent accidental contact. It restores the factory safety shield for safe operation. What it does:

• Shields high-voltage terminal connections from accidental contact
• Helps keep wiring routed and secured at the terminal block
• Reduces risk of shorting or arcing near the connection points
• Useful when replacing or servicing terminal block wiring or power cords

• One terminal block cover

• Always disconnect power at the breaker or unplug the appliance before working on electrical components
• Remove the appliance access panel to reach the terminal block, then place the cover over the terminals and fasten with the original screws
• Ensure all terminal connections are tight and properly insulated before restoring power