Parts for Briggs & Stratton 42E707-2275-E1: Carburetor (4-Screw Mount), Carburetor Overhaul Kit, Fuel Pump Kit Parts

This carburetor overhaul kit features authentic components needed for rebuilding a carburetor. This includes gaskets, diaphragms, pins, springs, and other items that would be needed when overhauling a carburetor. These are all important components to ensure that the carburetor is working efficiently. The gaskets, for example, ensure that there is no extra air getting into the carb that could cause a problem with the fuel to air mixture. The carburetor needs to be taken care of properly to function well and ensure the best performance of the engine. Over time, many elements of the carburetor can start to wear out, such as the gaskets becoming cracked or stretching. The springs could start to corrode. Owners should be sure that they are rebuilding the entire carburetor when they are making repairs and replacements, rather than just changing out one component at a time. The carburetor overhaul kit makes that easier. These are genuine OEM pieces for use in the carburetor. The kit contains a range of components that will be needed, and it can work with many makes and models. The parts are compatible with models from Briggs & Stratton, Craftsman, Toro, Cub Cadet, and Simplicity.

This carburetor overhaul kit is a genuine Midwest Engine part, sold individually. This carburetor overhaul kit can be used as a replacement part for a vertical engine. The carburetor overhaul kit comes with the carburetor, air filters, spark plugs, tune-up kits, and other repair parts required to perform repair, maintenance, or installation on a carburetor for a vertical engine. The purpose of the carburetor for a vertical engine is to mix fuel and air flowing into the appliance in the proper ratio required to ignite the spark plugs and power on the engine. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor overhaul kit is compatible with the following outdoor appliance brands: Midwest Engine and Briggs & Stratton.

This is an inline fuel filter and is an essential part of a fuel system. This part can be found inside the fuel tank or fitted into the fuel line. The fuel filter is responsible for straining particles like water and debris in the fuel so that they won't reach and clog the combustion chamber and eventually reduce the engine's performance. Annoying sputters when starting equipment and uneven idling are incidents that may be related to a clogged fuel filter. To remove a fuel filter, first cut off the fuel supply and then slide the fuel clamps away to remove the filter. Remember to work in a well-ventilated area, with no open flame or fire source, when installing this component. This part works with lawn mowers, snowblowers, tillers, generators, wood chippers, and others with small engines. It is compatible with brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn Boy, Snapper, and Simplicity. This is a manufacturer-supplied OEM replacement part and comes as an individual component.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This fuel pump kit is an authentic OEM replacement part sourced directly from the manufacturer for use in lawn and garden equipment. This fuel pump kit contains all the gaskets needed to repair a fuel pump or maintain it so that it doesn't have to be replaced. If the seals or gaskets have aged and deteriorated, leaking or friction could result and lead to engine damage. Replacing the gaskets with those in this fuel pump kit is much less expensive than replacing the entire fuel pump or carburetor.Work gloves, a screwdriver, and a pair of pliers are needed to install this fuel pump kit. The fuel pump and carburetor should be periodically inspected to determine if the gaskets and seals need to be replaced to keep the engine running smoothly. Regularly replacing these gaskets and seals prevents the carburetor from becoming clogged with contaminants and other debris that can prevent it from working correctly.This fuel pump kit is made of high-quality materials and is sold individually. This fuel pump kit is designed to be used on small engines manufactured by Briggs and Stratton.