Parts for Briggs & Stratton 283702-1015-E1: Carburetor, Gasket Sets / Kits Parts

Mounting screw for lawn and garden engines. Secures engine components and covers. Replace if stripped, corroded, missing, or damaged during maintenance.

This is a small adjustment screw used in lawn mower engines to regulate idle speed. It threads into the carburetor assembly and controls the amount of air or fuel mixture at idle. Replace this screw if it is stripped, corroded, or if the engine idle speed cannot be properly adjusted.

Float hinge pin for lawn and garden engines. Secures the carburetor float assembly. Replace if bent, worn, or missing to restore proper fuel flow regulation.

Fix engine fuel overflow or starting issues caused by a stuck or deteriorated carburetor float valve needle. Common repair for lawn mowers and snow blowers.

Engine won't start or runs rough? This carburetor overhaul kit restores proper fuel delivery. Includes gaskets, diaphragms, and seals. Moderate skill.

This is a carburetor overhaul kit. This kit contains all of the needed components to rebuild a lawn tractor carburetor. A carburetor overhaul kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance.A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps regulate the amount of fuel that is in this mixture. The gaskets create a seal that keeps unnecessary air out so that the engine works properly. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Signs that the carburetor diaphragm has gone bad include the engine not starting, cutting off while running, excessive smoke during use, or engine revving sounds produced independent of the operator. All of these signs indicate that a carburetor overhaul kit is needed.This is a genuine OEM part sourced directly from Midwest Engine. It is sold individually. This kit is compatible with lawn tractors manufactured by Midwest Engine, Briggs & Stratton, Toro, and Murray.

Here is a replacement carburetor float for small engines used on lawn mowers and other machines. The carburetor combines air and fuel, ensuring that the engine has the right mix for combustion and performance. The carburetor float plays a critical role in that process by helping to ensure that the optimum level of fuel stays in the chamber. As the fuel level rises and falls, the float does as well, operating the fuel needle and replenishing or slowing the supply of gasoline. Over time, carburetor floats can degrade due to exposure to gasoline and high temperatures. A sticking carburetor float is a sign that it needs to be replaced. The engine may sputter, may rev high, or may choke itself out. Replacing the carburetor float will require removing the air box, the air cleaner element, the fuel line, and the carburetor itself. The carburetor bowl must be removed to access the old float and replace it with a new one. Note that this is a new OEM carburetor float designed to fit Briggs & Stratton engines on over 150 different yard machines from brands like Murray, Toro, and Lawn-Boy. It is sold individually.

This is a carburetor float that is used in a wide variety of lawn and garden equipment. The carburetor float is used in the engine to close and open the float needle valve. The main responsibility of the carburetor float is to open up to allow fuel into the carburetor when drained and to shut off the flow of fuel if the bowl is filled. If the float isn't working properly, the engine may not idle, the carburetor can flood, and the motor may stall while the tool is in use.Before replacing the carburetor float, put on work gloves and disconnect the spark plug wire. The carburetor will need to be removed from the equipment. The carburetor float and any other malfunctioning parts can be taken out and replaced with new components. While working on the parts, the jets can also be cleaned as a maintenance process.This carburetor float is sold as an individual item. It is an authentic OEM replacement part sourced directly from the manufacturer. The float is designed to be used with lawnmowers, lawn tractors, wood chippers, and snowblowers manufactured by Cub Cadet, Briggs & Stratton, MTD, Toro, and Simplicity.

Fix fuel flooding or engine not starting issues with this carburetor needle seat kit. Includes float needle and seat for proper fuel flow control.

Seals the carburetor float bowl to prevent fuel leaks. Replace if you notice fuel leaking or excessive fuel consumption. Confirm fit with your model.

Hose connector for small engines. Replaces cracked, broken, or missing connectors that link fuel or breather hoses. Presses into place for secure fit.

Mounting screw for lawn and garden engines. Secures engine components and covers. Replace if stripped, corroded, missing, or damaged during maintenance.

Seals carburetor float bowl bolt to prevent fuel leaks on lawn mower engines. Replace during carburetor overhaul for proper seal. Verify fit with model.

Fix engine stalling or rough running caused by fuel delivery issues. This float bowl mounts to your carburetor and regulates fuel supply to the engine.