Parts for Briggs & Stratton 190402-1859-E1: Carburetor / Note 2 Parts

The Oven Lamp Assembly is an OEM part for Fisher & Paykel wall ovens and ranges. It contains both the light bulb and mounting socket needed to illuminate the oven cavity.

As this assembly is subjected to repeated heating cycles, the socket's integrity and bulb's lifespan may diminish over time. Causes of failure often involve standard wear from general use.

Symptoms of a problematic oven lamp assembly include:

• Stuck, flickering or unlit oven light
• Discolored or cracked lens assembly
• Loose or fragile connections at the socket
• Reduced illumination for monitoring food

The Air Flow Cushion for Lawn & Garden Engines is designed to optimize the performance of your outdoor equipment. This genuine OEM part ensures proper airflow, which is essential for the efficient operation of your lawn and garden engines. Crafted with high-quality materials, the SVC Air Flow Cushion PCOR30 provides reliable cushioning that helps reduce vibrations and noise, enhancing the overall stability of your engine. Compatible with a variety of Samsung lawn and garden engine models, this Air Flow Cushion guarantees a perfect fit and straightforward installation process. By replacing a worn or damaged cushion with this genuine OEM part, you can extend the lifespan of your engine and maintain its peak performance. The Air Flow Cushion for Lawn & Garden Engines not only improves engine efficiency but also contributes to a smoother and more comfortable user experience. Trust in this high-quality component to keep your outdoor machinery running smoothly and effectively.

This genuine Midwest Engine carburetor combines the air and the fuel at the correct ratio and filters that combination into the engine through a series of valves. This fuel combination is what the spark plugs ignite in the engine to run the outdoor appliance. Symptoms of a malfunctioning carburetor can include black smoke pouring out of the exhaust, significantly reduced fuel economy, difficulty starting the engine, a frequently stalling engine, or oil leakages from the location of the carburetor. If these symptoms point directly to the carburetor, the carburetor needs to be removed and replaced immediately before the appliance is used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM carburetor is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity. It can be used as a replacement part for the carburetors inside the small engines of snowblowers, wood-chippers, lawnmowers, tillers, generators, and other such outdoor appliances. This part is sold individually.

The LP Tube Bake Burner for Lawn & Garden Engines is an essential replacement part designed to enhance the performance of your outdoor equipment. This genuine OEM part ensures a perfect fit and reliable functionality, helping to maintain the efficiency and longevity of your lawn and garden engine. Crafted from high-quality materials, the bake burner effectively manages fuel combustion, resulting in smoother engine operation and reduced risk of overheating. Compatible with a wide range of lawn and garden engines, this LP Tube Bake Burner allows for easy installation, so you can quickly get back to your outdoor projects without hassle. By choosing this genuine OEM part, you are investing in durability and dependable performance, ensuring your engine runs optimally. Whether your current burner is damaged or worn out, the LP Tube Bake Burner for Lawn & Garden Engines provides a trustworthy solution to restore your engine's functionality and improve your overall user experience.

This genuine Midwest Engine carburetor body gasket can be used as a replacement part for lawn mowers, snowblowers, tillers, generators, and wood chippers. The purpose of a carburetor body gasket is to seal off the carburetor and prevent it from taking in air when it is not supposed to do so. Symptoms of a malfunctioning or broken carburetor body gasket can include strange vibrations from the engine while operating the appliance, a “hunting” idle and an engine that runs lean, or a backfiring engine. If any of these symptoms occur and can be directly attributed to a broken carburetor body gasket or a gasket that has come unsealed over time from neglect or general wear and tear, it should be replaced with this OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor body gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

A needle and seat kit is used similarly to a float valve. It allows fuel into the carburetor chamber when it is empty and stops more fuel from entering the same chamber when it is already full. With regular use and age, the needle and seat kit or valve will wear out, become damaged, or stop working efficiently. Signs of this include an engine that continuously revs and will not idle or one that won't start at all. To improve performance and prevent further damages, a new needle and seal kit must be installed.Installing a needle and seat kit is simple with the proper tools. Wear gloves for protection. Remove the damaged or worn needle and seal kit, clean the area, and replace it with a genuine OEM replacement part. Test the device before putting it back to use.This needle and seat kit is an authentic OEM part. It is supplied by the original manufacturer and sold individually. It is comprised of high-quality, durable materials. The needle and seat kit is compatible with Toro and Briggs and Stratton brands. The kit can be used with a variety of machines, including lawnmowers, generators, lawn tractors, snowblowers, and other devices with small engines.

This replacement cooktop grate restores a stable surface for pots and pans on compatible gas cooktops so burners work safely and cookware sits level. It replaces a damaged or worn grate to improve stove usability and appearance. What it does:

• Supports cookware over the burner for even heating and stable cooking
• Replaces cracked, chipped, or warped grates that cause wobbling or uneven pots
• Helps position cookware to maintain proper flame contact and cooking performance
• Restores a finished look to the cooktop when the original grate is damaged

• Allow the cooktop and burners to cool completely before removing or installing the grate
• Lift the old grate straight up and set the replacement grate into the same position; no tools typically required
• Clean with non-abrasive cleaners; avoid soaking or using a dishwasher unless the OEM instructions specify it's safe

This is a carburetor overhaul kit for those who are working on their carburetor. The carburetor adjusts the balance of air and fuel for the engine. When it is not working correctly, rebuilding the carb is an option, and the elements found in this kit can help with that. The carburetor has a range of parts that help it to function properly. Gaskets could wear out, pins could break, or valves could need to be replaced. If there are issues with any of those parts, it could cause problems, such as air leaking into the engine. Carburetor problems can cause rough running, misfires, and problems getting the engine to start and stay going. This is a genuine OEM replacement part with a range of pieces for the carburetor overhaul. This includes valves and needles, gaskets, springs, and a cotter pin. This overhaul kit is for small engine carburetors and is compatible with brands like Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

This is a muffler intended for use with various types of lawn equipment. The purpose of the muffler is to quiet the exhaust noise on the engine. If there are issues with the muffler, the engine may be louder than usual, or it will produce unusual sounds.The muffler is durable, but it may need to be replaced if it is corroded, cracked, or otherwise broken. Make sure the engine and the rest of the machine are cool before removing the old muffler and replacing it. Additionally, disconnect the spark plug wires before installing the part.The muffler is compatible with equipment manufactured by Tecumseh and Craftsman. This piece is sold individually. It is a genuine OEM replacement part that was sourced from the manufacturer.

This replacement utility motor restores motorized rotation for compatible appliances, helping components move or drive belts and pulleys so the appliance can operate normally. Designed as a direct-fit service part when original motor fails. What it does:

• Turns drive shafts, pulleys, or blower wheels to enable normal appliance operation
• Replaces worn or failed motor to stop symptoms such as no movement, intermittent operation, or humming without rotation
• Restores proper mechanical drive so related systems (tumble, circulation, or agitation) can function
• Works as a direct swap when the original utility motor is the root cause of drive failures

• One utility motor (single unit)

• Disconnect power before attempting diagnosis or replacement to avoid shock or injury
• Verify electrical connections and mounting match the old motor before installation
• Handle motor carefully to avoid damaging terminals or shaft; follow appliance-specific service manual for alignment and torque specs

This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.

This ignition set consists of an ignition breaker and condenser. It is made of durable materials and uses a mechanical switch to close the electrical system and make a spark. If these parts are not working correctly or are broken, the engine on the lawn equipment will not start so the machine cannot be used. If the ignition set might not be working, use a spark tester with a plug lead to test. Place the control on stop or shut it off and attempt to turn on the engine using a key or cord. There should be no spark. When in the on position, a spark should be present. If the spark doesn't occur, there may be broken wires, grounds, shorts, or defects, so the parts will need to be replaced.This ignition set is a genuine OEM replacement part that was sourced directly from the manufacturer. It is sold as a single kit. The part is designed to be used in lawnmowers, tillers, leaf blowers, and snowblowers created by Cub Cadet, Briggs & Stratton, Broan, Lawn-Boy, and Toro.

This foam A/C filter is a genuine replacement for select engines. The foam A/C filter is designed to go around an inner support and provides protection to keep debris from getting into the engine when the unit is in operation. The filter can become clogged with dirt and debris over time or it may dry out and shrink up in a way that keeps it from functioning properly. In either case, a replacement will be necessary and this OEM replacement part can provide the solution that people need. This OEM air filter is manufactured by Briggs & Stratton and meets exact standards for an ideal fit on compatible machines. It can be used on engines that are found in lawn tractors and mowers. The piece is sold individually and may be required as a part of routine maintenance so it may be helpful to keep an extra one on hand. Other parts and hardware will require an additional purchase. Replacing air filters and other maintenance should be done once per season or whenever a problem arises. Be sure to wear gloves and work in a well-ventilated area when performing engine repairs.