Parts for Briggs & Stratton 122332-0100-E8: Carburetor Parts

This is a genuine intake gasket replacement that is designed for use in certain lawn mower engines. This specialty intake gasket is what is responsible for creating the seal between the carburetor and the breather tube so that no gases or fluids leak when they pass between the two. This gasket is subjected to constant high pressure, vibrations, and extreme temperatures, and over time it will need replaced. Gaskets are generally considered a part of routine maintenance on most engines, and many owners will choose to keep a few extra on hand in case of an urgent repair need. This genuine OEM intake gasket is manufactured by Briggs & Stratton and designed to offer an identical replacement for the original gasket that came on the new unit. It is compatible with lawn mower engines in models from Briggs & Stratton and Toro, and will fit on over 150 different engine models in lawn mowers from these brands. The intake gasket is made of durable composite material. It is also a good idea to replace gaskets when servicing the carburetor to ensure a proper seal after reassembly. Be sure to use the right tools to install this part so that it isn't damaged in the process.

This is a genuine OEM replacement float needle valve sourced directly from the manufacturer. It is part of the carburetor on various lawn and garden small engines. The float needle valve floats in the carburetor float bowl to control fuel flow into the carburetor. As the bowl's fuel level goes down, the float valve needle also goes down, eventually blocking flow when the bowl is empty and thus signaling the need for more fuel. The float valve needle may stick or erode over time and need to be replaced. If the engine is not idling, stalls or hesitates, or is misfiring, the float valve needle may be the culprit. A socket set and wrench set are required for the removal and replacement. This project takes between thirty minutes and an hour. Empty the fuel from the fuel tank and carburetor before starting the project. Make sure the engine is cool and that the spark plug has been removed before starting. This float needle valve is made of high-quality metal and durable rubber and is sold as an individual part. The float valve does not come with the retainer clip. The valve is compatible with chippers, shredders, tillers, and other small engines manufactured by Briggs & Stratton, Cub Cadet, and Vanguard.

This part is a replacement shaft choke. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It can be used to replace a broken or otherwise defective shaft choke but in a variety of outdoor power equipment.The shaft choke attaches to the engine carburetor and allows adjustments to the carburetor itself by the user. Over time, this part may become worn or broken, requiring replacement. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this shaft choke, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this shaft choke is suitable for use on several different models of small engine outdoor power equipment manufactured by Midwest Engine and various other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

The carburetor float is housed in the carburetor and is used to help control the fuel flow. It adjusts the needle valve and ensures that the appropriate amount of fuel reaches the carburetor bowl. This helps provide the right mixture of air and gasoline for the engine to operate at optimal performance. Over time, the float can become worn or detached, or the pin could come loose. When this happens, the flow is affected, and the engine will not operate correctly. If the float isn't working correctly on a lawnmower or another small engine, it might be time for a replacement. This replacement part is a genuine OEM product designed to be used with many Briggs & Stratton engines, including lawnmowers, pressure washers, generators, and other lawn and outdoor equipment engines. It is sold as a single unit with the metal cotter pin included. There are more than 150 compatible machines that this unit will work with. If your lawnmower isn’t working as it should or if the float has come loose and can't control the flow appropriately, this OEM replacement can get things back in working order.

The carburetor has a float valve to control the flow of fuel from the tank to the reservoir. A float valve has three main components - a float, seat, and a needle. When there is adequate fuel level in the carburetor, the float will rise, prompting the needle to close against its seat and prevent overflowing. If the float valve is malfunctioning, it may overflow the carburetor. In some cases, it doesn't provide ample fuel into the carburetor. If you suspect that the needle and seat are faulty, don't waste another moment. Over time, a defective needle and seat can lead to more expensive repairs like a leaking carburetor and even an engine misfiring. For a genuine OEM replacement, get this Midwest Engine 398188 Needle & Seat Kit. Please take note that the Midwest Engine 398188 Needle & Seat Kit only comes with the needle and seat. If you also need a genuine Midwest Engine float replacement, you will need to purchase it separately.

A carburetor on a lawn or garden appliance often has a float-feed chamber or bowl mounted on one side. This is a miniature fuel tank that takes a trickle feed from the main fuel supply. A carburetor is unable to use fuel that is under pressure, so the float chamber keeps everything at atmospheric pressure. When any sort of dirt or debris enters the fuel and air passages, it can cause an array of issues. The debris may enter due to shrinkage of O-rings and gaskets, and that is why a replacement gasket is essential. A carburetor screwdriver is essential when making this repair. Replacing it involves removing several pieces of the carburetor assembly, including a float assembly, inlet needle valve, and the old fuel bowl gasket itself. This authentic replacement carburetor bowl gasket will fit a small engine carburetor bowl on wood chippers, leaf blowers, pressure washers, tillers, snowblowers, lawnmowers, and small engines. It is compatible with Briggs & Stratton, Toro, Simplicity, Lawn-Boy, Cub Cadet, and Snapper, among others.

This part is a replacement float bowl gasket. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a snapped, worn, or otherwise defective float bowl gasket in various engines. This float bowl gasket seals the gap between the float bowl and the carburetor, which helps to prevent fuel from leaking. Gaskets are particularly subject to wear and tear, and over time will become weathered, brittle, or otherwise deteriorated, thus requiring replacement. If you notice fuel leaking from the engine, this gasket may need to be replaced. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this float bowl gasket, the appropriate owner's manual and equipment diagrams should be referred to. This float bowl gasket is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with small engines that have been manufactured by Midwest Engine and Briggs and Stratton.

An air cleaner gasket is a valuable barrier between the carburetor of a machine and the air filter. This air cleaner gasket is made out of durable composite material. It is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snowblowers, tillers, leaf blowers, and wood chippers. It is compatible with products by brands such as Briggs & Stratton, Toro, Cub Cadet, Snapper, and Simplicity.The air cleaner gasket part is crucial to the health and longevity of the machine's engine. The purpose of the air cleaner gasket is to help seal and protect the engine, the air cleaner, and other internal systems from dirt, contaminants, and debris that can often become the source of engine problems.The proper gasket for each user's engine depends entirely on the engine's design. That's why it is strongly recommended that users check their engine's Illustrated Parts List and refer back to their owner's manuals before making any decisions. This air cleaner gasket is an original OEM part sourced directly from the manufacturer, Midwest Engines. It is sold individually.

This sealing washer is a genuine Midwest Engine part, sold individually. This sealing washer can be used as a replacement part for a variety of small engine outdoor appliances including chipper shredders, lawn mowers, and tillers. The purpose of a sealing washer is to create space between fastening components so they are not damaged by friction.The sealing washer of an outdoor appliance might have to be replaced if it is lost, misplaced, or damaged to the point that it cannot serve its function. The sealing washer could be stripped over time from general wear and tear or, as it is a small part, can be lost or misplaced easily. If this occurs, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This sealing washer is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, and Cub Cadet.

This replacement part is a float bowl. This part is a small part of the carburetor and is able to hold a small amount of liquid gasoline. This serves as a reservoir for fuel.If the engine is unable to run due to lack of fuel, it might be because of a malfunctioning float bowl. Be sure to wear work gloves during this repair as working near the carburetor might be dangerous in certain situations. This is a genuine replacement part made by Midwest Engine. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

A carburetor float bowl is an essential part of every carburetor because it controls the flow of gasoline from the fuel tank to the motor. Whether because of gasoline impurities or lots of use, the interior pieces of small engines may fail and need to be rebuilt. For that purpose, the float bowl comes with the three required gaskets. Replacing the float bowl in a Briggs & Stratton carburetor is a simple process. First, detach the carburetor from the engine, then removing the screw from the top of the carburetor housing. Replace the large gasket with the new one, making sure that it fits properly and will seal. Then set the new float bowl down onto the gasket. Next, take the small gasket and place it atop the float bowl, screwing the bolt onto the float bowl. Then it’s time to reattach the carburetor to the Briggs & Stratton engine. This OEM assembly is a factory-built replacement for the original parts it replaces. It is individually packaged and sold separately. Mowers, chippers, generators, blowers, snowblowers, tillers, and other small engines using a Briggs & Stratton engine can use this replacement kit. Among compatible brands are Craftsman, Snapper, Simplicity, Toro, Cub Cadet, and Lawn boy.