Parts for Ge GWE19JSLDFSS: Case Parts

This hinge cover screw fastens the hinge cover in place, helping keep it secure and protecting the hinge components beneath. Replace a missing or stripped screw to stop the cover from loosening or rattling.

• Secures the hinge cover to the door/cabinet hinge
• Helps protect hinge hardware and wiring under the cover
• Replaces stripped, rusted, or missing hardware
• Common symptoms: loose or missing hinge cover, vibration or rattling at the hinge area

• Disconnect power to the appliance before servicing near the hinge area
• Use the correct screwdriver; start threads by hand to avoid cross-threading
• Align the cover properly and tighten snugly—do not overtighten to prevent stripping
• Keep the door closed during work to minimize movement

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This leveling screw threads into the refrigerator's leveling leg or adjuster bracket to raise or lower the cabinet. Replacing a stripped or missing screw restores stable footing and helps keep doors aligned for proper sealing.

• Provides threaded height adjustment of the leveling leg/roller bracket
• Helps stop rocking or wobbling that can cause vibration and rattling
• Aids in door alignment so doors close and seal properly
• Replace if threads are stripped, screw is bent, seized, or missing

• Disconnect power and turn off the water supply before servicing
• Protect flooring; with assistance, carefully tip the appliance slightly to relieve weight from the adjuster
• Remove the damaged screw; hand-start the new screw to avoid cross-threading, then adjust until level
• Verify the cabinet is stable and doors operate correctly before restoring power

Size: 10-32 GXTT FLP.595 S

The Door Light Switch is an OEM part for GE refrigerators. It is located near the top of the refrigerator compartment, and it is activated by the door's movement. When the door is opened, the switch is triggered, turning on the interior light to provide visibility. When the door is closed, the switch is released, turning off the light to conserve energy.

Causes of a faulty or damaged door light switch can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as the interior light not turning on or off properly, or the light staying illuminated even when the door is closed.

Symptoms of a bad door light switch may include:

• The interior light not turning on when the door is opened
• The interior light not turning off when the door is closed
• Inconsistent or flickering operation of the interior light

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This right-hand top hinge assembly secures and supports the refrigerator door at the cabinet top, restoring proper door alignment and smooth opening. It's a direct-fit replacement when the upper hinge is cracked, bent, or worn. What it does:

• Supports the upper corner of the door and maintains correct door alignment
• Helps the door open and close smoothly and stay level
• Prevents door sagging that can cause gaps, rubbing, or poor sealing
• Replaces damaged, bent, or broken top hinge hardware that can cause noisy operation

• Disconnect power to the appliance before starting and remove any items from the door
• Support or remove the door per manufacturer instructions before loosening hinge fasteners
• Use proper hand tools and tighten fasteners securely; check door alignment and gasket seal after installation

This top interface is the outer control-panel surface for select GE ranges and ovens, finished in Dorian Gray to match the appliance trim. It restores the look and provides a clean surface for the control buttons and display. What it does:

• Serves as the front surface for the appliance control area and covers the underlying switch and display components.
• Restores cosmetic appearance when the original panel is faded, scratched, or discolored.
• Helps maintain a stable, accessible surface for control buttons and touch areas.
• Resolves issues where dirt, wear, or damage prevents reliable button actuation or clear display visibility.

• One top interface panel (Dorian Gray) as shown

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Removal typically requires accessing the console by removing screws and gently separating the panel from the console assembly.
• Handle with care to avoid scratching the finish; align clips and fasteners before tightening.

The Top Hinge Assembly is an OEM part for GE refrigerators responsible for providing stability and support to the refrigerator door, ensuring proper alignment and sealing. It helps maintain the temperature inside the refrigerator by keeping the door securely closed.

A bad top hinge assembly can be caused by wear and tear over time, excessive weight or force applied to the door, or damage due to accidental impact or mishandling.

Symptoms of a bad top hinge assembly include:

• Difficulty in opening or closing the refrigerator door.
• Uneven alignment or gaps between the door and the refrigerator body.
• A loose or wobbly feeling when opening or closing the door.
• The door not staying closed properly.

Replace your worn-out or damaged top hinge assembly with this OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This striker top mullion replaces the top striker piece that the refrigerator door latch catches on, restoring proper door engagement and a tight seal. Useful when the striker is worn, damaged, or misaligned. What it does

• Provides the mating strike surface for the door latch so the door stays securely closed.
• Helps maintain an even door seal to reduce cold-air leaks and temperature loss.
• Stops door misalignment or rattling caused by a worn or broken striker.
• Compatible with standard mullion assemblies that use a separate top striker piece.

• One striker top mullion.

• Disconnect power and remove food from the door area before starting work.
• Inspect the surrounding mullion and latch for wear; replace damaged components as needed.
• Handle edges carefully; mounting screws or clips may be required.