Parts for Frigidaire FEB755CESG: 04 - Cavity / Elements Lower Oven Parts

Chrome oven rack that slides into your wall oven to support cookware. Replace your rack if it's missing, cracked, warped, or has damaged glides.

Has two terminals.

Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Secures panels and components in your range or oven. Replace if broken, bent, or missing to prevent shifting and reduce vibration noise. Confirm fit.

Oven broiler not heating or working? This broil element generates radiant heat at the top of your oven for browning and crisping. DIY-friendly repair.

Oven won't heat or bakes unevenly? A failed bake element is likely the cause. This lower heating element replacement typically takes 30 minutes or less.

Secures cooktop surface elements to your range for stable contact and even heating. Replace if bent or worn to restore proper element positioning.

This oven liner assembly replaces the damaged or worn inner cavity of the oven to restore a clean, heat-safe cooking surface and help maintain even heating. Designed to fit into the oven cavity and support racks and insulation. What it does:

• Provides the finished metal interior surface of the oven where cookware sits
• Restores protection for insulation and insulation retention clips
• Helps prevent heat loss and reduces hotspots caused by warped or damaged liners
• Stops visible cracking, peeling enamel, or burned-through areas that can collect food debris

• Disconnect power (and gas if applicable) before starting any work
• Part is heavy and large; two people may be needed to remove/install safely
• Use manufacturer screws/fasteners before finalizing installation

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

This wrapper is the structural support that surrounds and secures the washer tub, helping maintain proper tub alignment and reducing vibration for smooth operation. Replaces damaged or warped wrappers to restore stable tub positioning. What it does:

• Provides a mounting surface and structural support for the washer outer/inner tub assembly
• Helps keep the tub aligned to prevent rubbing, excessive vibration or noise
• Maintains proper spacing and clearance for internal components
• Can contribute to leaks or abnormal movement if cracked, bent or corroded

• Disconnect power and shut off water before starting any repair
• Drain the washer and support the tub before removing the old wrapper to avoid injury or damage
• Installation may require panel removal, lifting the tub, and common hand tools; wear appropriate PPE and follow OEM instructions for torque and fastener reuse

10-24 x 1/2 inch machine screw that secures temperature probe and thermistor brackets to cooktop, oven, and range chassis. Replace if missing or stripped.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Hex washer head ,10-32 x 0.375. Ground

This 10-16 x 1-1/4 screw secures appliance panels and components, restoring proper fit and preventing loose parts. Use it when fasteners are missing, stripped, or causing rattle and misalignment. What it does:

• Fastens trim, brackets, or interior panels to restore secure attachment
• Stops rattling or vibration caused by loose hardware
• Replaces missing or damaged screws to maintain safe operation
• Matches OEM thread and length for correct fit in specified locations

• Disconnect power and empty appliance as needed before servicing
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until parts seat to prevent striping or cracking
• Replace all matching screws for consistent fit

Wire junction box assembly for wall ovens. Houses and protects electrical connections. Replace if cracked, damaged, or missing to properly enclose wiring.

This part has been discontinued by the manufacturer and is no longer available.