Parts for Dacor CPO230: Chassis Assembly Parts

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This temperature sensor kit replaces a failed refrigerator temperature sensor to restore accurate temperature monitoring and help the control board maintain proper cooling. It's designed for service replacement and OEM fit. What it does:

• Monitors internal compartment temperature so the refrigerator control can regulate cooling cycles.
• Helps prevent overcooling or warming caused by a faulty or open sensor.
• Common symptom fix: refrigerator/freezer running too warm or too cold, or erratic cycling.
• Clears temperature-related error codes when installed in place of a defective sensor.

• Disconnect power to the appliance before starting any repair.
• Handle sensor tip and wiring gently; avoid sharp bends or pinching the harness.
• Route and secure the sensor wiring per OEM locations to ensure correct readings.

The Phillips #8 x 3/8 Screw for Electronic Sewing Machines is an essential component for maintaining your sewing machine's performance. This genuine OEM part is specifically designed to fit a variety of electronic sewing machine models, ensuring a perfect and secure fit every time. Crafted with high-quality materials, the Phillips #8 x 3/8 Screw provides durability and reliable fastening, helping to keep your machine stable and functioning smoothly. Whether you need to replace a missing or damaged screw, this part offers the precision and strength required for effective repairs. Using the Phillips #8 x 3/8 Screw for Electronic Sewing Machines ensures that your appliance remains in optimal working condition, enhancing its longevity and your overall sewing experience. Trust in this genuine OEM part to deliver the quality and dependability you expect from your sewing machine.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

Phillips Pan Screw, #8-32 x5/16 Zinc Plated is a vital component for your Samsung air purifier. This genuine OEM part ensures a perfect fit and reliable performance, making it ideal for DIY repairs and maintenance. Crafted with precision, the #8-32 thread size and 5/16-inch length provide the necessary strength and stability for assembling various parts of your appliance. The zinc plating offers excellent resistance to corrosion, enhancing the screw's durability and extending the lifespan of your air purifier. By choosing this Phillips Pan Screw, you can confidently restore your device to optimal functionality without compromising on quality. It is specifically designed to be compatible with a range of Samsung air purifier models, ensuring seamless integration and easy installation. Whether you need to replace a missing screw or reinforce existing connections, this genuine OEM part delivers dependable performance. Enhance your applianceGÇÖs efficiency and maintain its superior operation with this high-quality Phillips Pan Screw, tailored to meet SamsungGÇÖs stringent standards.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

Due to manufacturer changes this door latch has been replaced by two other kits. You must contact us with your complete model number for the correct replacement.

The Gas Line Trimmer Cover Plate Light is essential for maintaining the functionality and appearance of your gas line trimmer. This genuine OEM part ensures a perfect fit, seamlessly integrating with your trimmer to provide reliable protection and illumination. Crafted from durable materials, the cover plate light safeguards critical components from dust and debris while enhancing visibility during operation. Installing the Gas Line Trimmer Cover Plate Light is straightforward, allowing you to quickly restore your trimmer to optimal performance. This genuine OEM part is specifically designed for Samsung gas line trimmers, ensuring compatibility and longevity. By choosing this cover plate light, you guarantee that your appliance operates efficiently and safely. Whether you need to replace a damaged cover or upgrade your existing setup, the Gas Line Trimmer Cover Plate Light is the perfect solution to enhance your trimmerGÇÖs durability and functionality.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Electric Wall Oven Convection Motor Cover is an essential component for maintaining your oven's performance. This genuine OEM part is specifically designed to fit a variety of electric wall oven models, ensuring a secure and precise installation every time. Crafted from durable materials, the convection motor cover protects the motor from dust, debris, and everyday wear, helping to extend the lifespan of your appliance. By replacing a damaged or missing motor cover with this high-quality part, you can restore your oven's functionality and ensure consistent cooking results. The Svc-cover conv motor opening;26545bp,do2 is easy to install, allowing you to quickly get back to using your oven without hassle. Investing in this genuine OEM part guarantees compatibility and reliability, providing peace of mind and enhancing the overall efficiency of your electric wall oven. Choose the Electric Wall Oven Convection Motor Cover to ensure your oven operates smoothly and effectively for years to come.

The Electric Wall Oven Convection Motor Cover is an essential component for maintaining your oven's performance. This genuine OEM part is specifically designed to fit a variety of electric wall oven models, ensuring a secure and precise installation every time. Crafted from durable materials, the convection motor cover protects the motor from dust, debris, and everyday wear, helping to extend the lifespan of your appliance. By replacing a damaged or missing motor cover with this high-quality part, you can restore your oven's functionality and ensure consistent cooking results. The Svc-cover conv motor opening;26545bp,do2 is easy to install, allowing you to quickly get back to using your oven without hassle. Investing in this genuine OEM part guarantees compatibility and reliability, providing peace of mind and enhancing the overall efficiency of your electric wall oven. Choose the Electric Wall Oven Convection Motor Cover to ensure your oven operates smoothly and effectively for years to come.

This service bushing protects and cushions appliance wiring where it passes through metal panels, helping prevent chafing and shorts. It's a simple replacement that restores proper routing and insulation for harness wires. What it does:

• Cushions wiring at panel openings to reduce abrasion and wear
• Keeps wiring properly routed to prevent pinching or intermittent connections
• Helps stop rattling or vibration where wires contact metal edges
• Addresses symptoms like exposed or frayed insulation, burning smell, or intermittent power related to damaged panel wiring

• One service bushing

• Disconnect power before starting any repair
• Remove the access panel or trim to reach the damaged bushing location
• Press the bushing into the panel hole until fully seated; replace wiring through the bushing as routed originally
• Inspect surrounding wiring and replace any frayed or heat-damaged sections; reassemble panels securely