Parts for Kitchenaid 5KSM150PSITG4: 01 - Color Variation Parts

This gearcase housing is the molded enclosure that supports and protects the motor drive gears, keeping them aligned for reliable rotation. It restores proper gear engagement and prevents debris from entering the drive area. What it does:

• Houses and positions the motor drive gears so the drive system turns smoothly
• Protects internal gears from lint, dust, and moisture that can cause wear or jamming
• Helps maintain correct gear alignment to reduce noise, grinding, or slipping during operation
• Supports the motor/gear assembly for consistent power transfer to the drivetrain

• Install with original fasteners and proper torque to maintain alignment
• Inspect gears, seals, and nearby components; replace any worn parts while housing is accessible
• Disconnect power and follow manufacturer safety procedures before attempting service

This grille housing assembly replaces the front grille frame to restore appearance and proper airflow around the appliance. The Almond creme finish matches cabinets and trim for a factory-fit look. What it does:

• Replaces a cracked, warped, or discolored front grille housing
• Restores correct airflow and alignment of the lower/front access area
• Helps prevent debris from entering internal components behind the grille
• Returns the appliance to a uniform Almond creme exterior appearance

• One grille housing assembly in Almond creme finish

• Install requires removing the lower access/grille area; keep panels and fasteners organized
• Handle the replacement part gently to avoid scratching the finish
• Disconnect power to the appliance before beginning work to avoid injury

This motor housing is the outer mounting component that secures and protects the appliance motor, helping keep the motor aligned and reducing vibration for quieter operation. Choose the correct color/finish variant for your unit. What it does:

• Provides a stable mounting point for the motor to prevent misalignment and excessive movement
• Protects the motor from debris and contact with adjacent parts
• Helps reduce motor vibration and related noise during operation
• Used to restore proper motor positioning when worn, cracked, or bent housing causes rubbing or abnormal sounds

• One motor housing (color/finish depends on selected variant)

• Disconnect power before beginning service; follow all safety warnings for your appliance
• Basic disassembly (cabinet/drum removal) is typically required to access and replace the housing
• Inspect mounting hardware and gaskets; replace any damaged fasteners or seals as needed
• If symptoms persist after replacement (noise, rubbing, excessive vibration), check motor mounts, blower, and alignment

This band trim is a cosmetic finishing piece that covers and protects the visible edge of the appliance door or cabinet for a clean, factory look. It refreshes appearance and helps keep dirt and moisture out of the seam. What it does:

• Covers and finishes the exposed edge of a door or cabinet for a uniform appearance
• Helps reduce dirt and grime buildup along the seam between panels
• Restores a worn, scratched, or missing trim to improve overall appliance appearance
• Works with existing door/cabinet mounting points to sit flush with surrounding surfaces

• Disconnect power to the appliance before starting repairs and work on a cool, dry surface
• Remove any clips or fasteners holding the old trim; save reusable hardware
• Align the new trim with the edge and press or secure into place using the original mounting points
• Replace them with OEM-specified hardware

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

A factory-matched Almond crème touch-up paint bottle to restore small chips, scratches, and worn spots on Almond-finish appliances. Helps blend blemishes into surrounding finish for a cleaner, more consistent look. What it does:

• Provides color-matched coverage for small surface chips and scratches on Almond-finish appliances
• Restores appearance without replacing large panels or trim
• Helps hide everyday wear and minor cosmetic damage
• Dries to a durable finish that blends with factory color

• One (1) bottle of Almond crème touch-up paint

• Shake well before use and test on an inconspicuous area first
• Clean and dry the surface thoroughly; remove loose paint and grease
• Apply sparingly in thin coats, allowing recommended drying time between coats
• Use in a well-ventilated area and follow all safety label instructions; wear gloves and eye protection

Color: White

This replacement planetary assembly restores proper drive alignment and support for rotating components in select laundry appliances, helping reduce noise and vibration while returning smooth drum rotation. What it does:

• Transmits rotational force between the drive system and rotating drum components
• Supports alignment of the rotating assembly to prevent wobble or irregular movement
• Helps eliminate grinding, clunking or unusual noises caused by worn planetary components
• Resolve intermittent or complete loss of rotation when the planetary is worn or damaged

• Disconnect power and follow lock-out/tag-out before starting any repair
• Basic hand tools are typically required; refer to the appliance service manual for exact procedure
• Inspect adjacent parts (gears, bearings, seals) and replace if damaged

Color: Almond creme

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

Color: White

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This Almond Creme color finish panel restores the original look of your appliance where the finish is worn, scratched, or mismatched. It provides a factory-style color match to keep the exterior appearance consistent. What it does:

• Replaces damaged or discolored finish panels to restore appliance appearance
• Covers scratches, chips, and worn paint on the affected area
• Matches the Almond Creme factory color to maintain a cohesive look
• Helps maintain resale value and overall visual condition

• Disconnect power to the appliance before beginning any work
• Handle panel carefully to avoid scratching the finish during installation
• Align tabs and mounting points, then secure with existing fasteners as required

This pedestal feet assembly provides the lower support and leveling for a laundry pedestal, helping keep the pedestal stable and aligned beneath the washer or dryer. Designed to restore proper support and reduce rocking. What it does:

• Replaces damaged or worn pedestal feet that cause rocking, uneven height, or instability
• Provides adjustable support to help level the pedestal on uneven floors
• Protects floors by maintaining proper pedestal alignment and preventing scraping
• Restores safe, secure support for appliances installed on the pedestal

• Follow the appliance and pedestal manufacturer instructions; have a second person or proper support to prevent tip-over when removing or installing the pedestal
• Ensure the appliance is powered off and disconnected from utilities if appliance removal or repositioning is required
• Use basic hand tools; confirm all fasteners are tightened securely after installation