Columbia Chipper Shredder Parts

This is a cylinder head gasket that is an OEM replacement part sourced directly from the manufacturer for use on lawn mowers and other small engines in outdoor lawn and garden equipment. The head gasket is the engine block that separates the cylinder head from the engine block. This gasket is used to prevent oil from mixing with coolant. The cylinder gasket seal also seals the internal combustion process, putting it under the pressure it needs to operate. If the gasket is worn or cracked and the pressure is not right, the engine will not operate correctly, and there will be a loss of power. Oil leaks are another way to tell that the cylinder head gasket is bad and needs to be replaced. Before deciding if the cylinder head gasket is the problem, a compression test should be run using a compression gauge. After pulling the starter cord, the internal pressure should read 60 psi. If the reading is less than this, the cylinder head has lost compression, and the gasket should be removed and replaced. This cylinder head gasket is sold individually. This gasket is designed for use on lawn mowers and small engines manufactured by MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky.

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This carbon canister is a device used to control the amount of gas pollution that is released from small engines found in various lawn and garden machines. This is a genuine OEM replacement part that is sourced from the manufacturer. It is an emission control device also known as a charcoal canister. As gas evaporates from the fuel tank, the carbon canister catches the fumes and releases them into the engine so that they are not dispersed into the atmosphere. Age and regular use may cause the canister to crack or break and not hold the fumes inside. Typical signs that the canister needs replaced include strong fuel odors or leaking from the canister. If the canister is flooded by fuel, the canister will not operate properly. Fuel will spill out, and the canister will need to be replaced. Before replacing the carbon canister, empty the fuel from the machine and remove the spark plug wire for added safety. This repair should be made in a well-ventilated area.The carbon canister is made from heavy-duty plastic and is sold as an individual unit. It is compatible with tillers, chippers, and other small engines manufactured by MTD, Cub Cadet, Yard Machines, and Troy-Bilt.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.