Parts for White Outdoor 24AD595C190 / 1998: Complete Assembly Parts

This nut, or slotted nut, is a genuine MTD part. It is a replacement part for use on lawn mowers, log splitters, wood chippers, lawn tractors, and chipper shredders. It is hexagonal in shape.The uses for this nut vary greatly depending on the machine with which owners plan to use it. Generally speaking, nuts work to secure various parts of components together. Loosening and tightening most nuts can be accomplished with a wrench. Before making any repairs, be sure that the engine has completely cooled, empty the fuel tank to avoid spillage, and disconnect the spark plug or battery. Wear work gloves and other protective gear.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually; very often, more than one nut is used on machines such as these, so be sure to check how many are needed. It is designed for compatibility with various machines made by Agway Craftsman, Cub Cadet, Duerr, MTD, Lawn Chief, OEM, Ranch King, Remington, Ryobi, White Outdoor, Yard Machines, and Yard-Man.

Secures wheels and attachments to axles on lawn mowers and tractors. Replace if bent, rusted, broken, or lost to restore safe equipment operation.

This hubcap is an authentic OEM replacement part sourced directly from the manufacturer for use on log splitter and chipper wheels. The hubcap covers the central opening of the wheel assembly. This prevents dirt and debris from getting into the wheel assembly. If the hubcap comes off during use or is lost when replacing tires, a new one should be installed. The machine will work without a hubcap; however, the interior wheel assembly will be open to flying debris and could be damaged if rocks or large limbs go into the wheel assembly. During routine inspection and maintenance, the hub caps should be checked for damage and to make sure they are in place.The hubcap is easily removed and replaced with a screwdriver needed to pry the old hubcap off if it is still on the machine. The new hubcap simply snaps into place. This hubcap is made of high-quality metal and is sold individually. This hubcap is designed to be used with log splitters and chippers manufactured by MTD, Cub Cadet, Troy Bilt, Husky, and Yard-Man.

Tubeless air valve for lawn tractor and mower tires. Replace when cracked, leaking, or damaged during tire changes. Installs in wheel rim for proper inflation.

This cutting wheel assembly sits inside the chipper shredder housing to break down yard debris into smaller pieces. Replace when blades become dull, chipped, or the wheel wobbles excessively during operation.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Mandrel bearing for riding mowers and lawn tractors. Replace if spindle makes noise or blade wobbles. Ensures smooth blade rotation. Verify fit by model.

Lock washer prevents fasteners from loosening due to vibration in lawn mowers, snowblowers, and outdoor power equipment. Simple replacement part.

Replacement washer for lawn mowers and outdoor power equipment. Installs with bolts to distribute load and prevent loosening. Replace if worn or missing.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

This dislodger is a genuine MTD part, sold individually. This dislodger can be used as a replacement part for a log splitter. The purpose of a dislodger is to unclog and remove chopped logs that are stuck in the mechanism of the appliance so it can continue to be operated.The dislodger might have to be replaced in the event that it can no longer serve its typical function; this could occur if the dislodger has been damaged from general wear and tear over long-term usage or as a result of a collision with a hard object. If the dislodger is punctured, scraped, eroded, or warped to the point that it does not remove logs from the appliance, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This dislodger is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, and Cub Cadet.

Replacement hex bolt for lawn tractors, log splitters, and wood chippers. Secures components when original is stripped, missing, or corroded.

Hex screw for lawn mowers and outdoor power equipment. Replaces lost, stripped, or damaged hardware. Secures components and panels during assembly.

This genuine OEM replacement nut-hex center is used on lawnmowers, wood chippers, snowblowers, chainsaws, tillers, edgers, and log splitters. Hex is short for hexagon, which means this nut has 6 sides. This hex center locking nut is one piece and made of all metal. As the nut is made from metal, it is not compromised due to high temperatures.The purpose of this center locking nut is for fastening to a hex cap screw, socket cap screw, or bolt. Given that these center nuts will stay put without being seated, they are ideal to be used as stop nuts or spacers for rotating or other components. These nut hex centers contain internal threads and are driven with a wrench. These center nuts are reusable for a limited number of times, as the torque declines after each use. The user will want to ensure the threads of the nut are not compromised before using. It is recommended to use a new nut over a used one. This replacement nut is compatible with Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Husky, Yard-Man, and MasterCut devices. This Nut-Hex Center is sourced directly from the manufacturer and is sold individually.

Replacement spring for lawn tractors and riding mowers. Restores tension and function when original spring is broken, stretched, or missing.

Wood not splitting properly or getting jammed? This log splitter wedge assembly guides wood through the splitting mechanism. Durable metal construction.

Back plate pusher for log splitters. Installs in the pushing mechanism to help drive logs through the cutting blade. Replace if cracked, worn, or broken.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

This part is a replacement floating gib plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or defective floating gib plate in a variety of different log splitter models.The floating gib plate works to support the wedge assembly and keep it in good alignment. This part can become worn or broken over time and will require replacement to keep the equipment functioning properly. Proper tools may be required to install this part. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this floating gib plate, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this floating gib plate is suitable for use on several different models of lawnmowers manufactured by MTD. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Hydraulic cylinder for log splitters. Replace if leaking, cracked, or damaged. Essential structural component that houses the piston rod assembly.

Fix sluggish or inconsistent splitting action with this log splitter control valve. Regulates hydraulic cylinder movement for smooth operation.

Hydraulic tube for log splitters. Connects hydraulic components and reduces vibration. Replace if cracked, leaking, or damaged during operation.

Replace cracked or missing 3/4 inch hose barb fitting on lawn tractors, log splitters, and chippers. Secures hose connections for proper operation.

Replace a lost, stripped, or corroded nut on your lawn mower, tractor, or outdoor power equipment. Secures components for safe operation.

Hex center nut secures components on lawn mowers and outdoor power equipment. Replace if stripped, corroded, or missing to ensure proper assembly.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This replacement part is a tube tongue, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Tube tongues are commonly found in log splitters and are one of the main parts of this appliance. Tube tongues are used to place logs prior to being split. This part helps line the piece of wood up with the splitting mechanism so that it is cut properly. A new tube tongue might be needed if the current one is damaged or broken in any way. Because this part is so important to the main part of a log splitter, it is possible that the device will not work if it is damaged in any way. Log splitters have various sharp and dangerous parts, so be sure to wear working gloves while completing this repair. Reference the appropriate user guide for more specific instructions on how to replace this part. This part is sourced directly from the manufacturer. This is a genuine OEM replacement part and is told individually.

Replacement locking rod for log splitters. Secures and fastens components together. Order a new rod if yours is bent, broken, or missing.

This is an oil filter designed for use in larger gasoline-powered landscaping and outdoor equipment such as log splitters and chippers. An oil filter is an essential safeguard to maintain a good operating condition and ensure long life in a gas engine. Oil filters remove toxic chemicals as small pieces of debris that can end up in the engines. Because these contaminants, if improperly removed, could also end up in the air or in the environment in other ways, oil filters must be meet EPA emission regulations. This filter not only meets federal environmental standards but also is an OEM guaranteed replacement part that is manufactured to the identical specification of the original parts being replaced. By the very nature of what it's supposed to accomplish, eventually, the filter will need to be replaced. Over time the filter's elements will become full of debris, and failing to replace it in a timely manner runs the risk of allowing the captured pollutants to escape back into the engine oil. When replacing the old filter, make sure to follow environmental guidelines as well, disposing of the oil and filter according to posted regulations. Replacing the filter is the ideal time to replace the engine oil as well. This filter is compatible with Husky, Cub Cadet, Troy-Bilt, Yard-Man, and MTD equipment.

Replace your power equipment's filter head to maintain clean fuel flow and optimal engine performance. Attaches to filter with built-in valve. Verify fit.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

90 degree male hydraulic adapter for log splitters. Replaces worn, damaged, or leaking hydraulic fittings. Essential connector for maintaining hydraulic lines.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

Replace a cracked, bent, or missing bracket and flange on your log splitter. This structural component provides secure mounting and support for safe operation.

Hex head screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if missing, stripped, or damaged during maintenance.

Square key fastener for lawn tractors and outdoor power equipment. Secures drive components by fitting into shaft keyways. Replace if worn or missing.

Suction hose for log splitters. Replace if cracked, leaking, or causing hydraulic performance issues. Verify fit with your model number before ordering.

Hydraulic hose transports fluid between ports in log splitters and lawn equipment. Replace if cracked, leaking, or damaged. Verify fit with your model.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This beam support assembly is a genuine MTD part, sold individually. This beam support assembly can be used as a replacement part for a log splitter. The purpose of the beam support assembly is to reduce stress on the beam so that the appliance can continue to operate under extreme conditions without wearing down quickly.The beam support assembly might need to be replaced at some point within the standard lifespan of a log splitter if the appliance becomes worn with long-term use or is otherwise damaged. If either of these incidents result in damage to the beam support assembly, the component should be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This beam support assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Cub Cadet.

Replacement handle grip for log splitters and outdoor power equipment. Covers the handle surface for improved comfort and control. Replace when cracked or worn.

Here is a replacement control handle assembly for use with chippers and similar machines. The assembly is the part of the machine that allows the user to control the function of the machine. Control handles tend to be well-made and durable, and they can last a long time on the machines. However, owners may find that they will eventually need to replace the handle assembly. The handle could break, there could be corrosion or a break on the lever, or one of the connecting pieces, such as a pin, could become lost or broken. When dealing with a problematic control handle assembly, it is often a good idea to replace the entire assembly, not just a piece of it. This is a genuine OEM replacement control handle assembly for log splitters and wood chippers. The control handle assembly is sold individually, but it does contain the parts that are needed to replace and affix the handle to the machine. The part can work with more than 150 different machines, and it is compatible with Cub Cadet, Yard Machines, MTD, MasterCut, and Yard-Man.

Replacement spacer for log splitter assemblies. Maintains proper alignment and spacing between components. Order if your original is missing or damaged.

Grease retainer fastener for log splitters. Secures and holds the grease seal assembly in place. Replace if cracked, damaged, or missing during maintenance.

This flat washer is used to attach the idler pulley in a number of small and medium sized gasoline powered engines. These engines include snow blowers, log splitters, riding mowers, lawn tractors, and chippers. Because the idler pulley is subject to a great deal of resistance when the pulley is engaged, eventually the pulley will wear out. Should there be a squealing sound when engaging the drive, the problem is likely the idler pulley. In these cases, the pulley must be replaced. It is a good idea to replace the surrounding hardware when replacing the idler pulley; tNhis includes the flat washer, which is subject to corrosion during heavy use. To replace the idler pulley, first detach the spark plug cap. If on a mower or tractor, drop the mower deck. Remove the original pulley and install in order: replacement pulley, hex bolt, flat washer, flange nut. Apart from dropping the mower deck, the only tools required to complete this installation may be a 9/16 ratchet and combination wrench. This washer is a genuine OEM replacement part, designed to perfectly replicate the original piece. This washer is compatible with Troy-Bilt, Yard Man, Yard Machines, MTD, and Craftsman devices.

Hex lock nut secures bolted joints on outdoor lawn equipment. Replace if threads are stripped, nut is missing, or won't hold proper tension.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.