Parts for Bosch B22CS50SNW/01: Compressor Parts

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This fan motor powers the appliance's blower assembly to move air for proper ventilation and cooling. Replaces a worn or failed motor to restore airflow and reduce overheating or poor venting. What it does:

• Spins the blower wheel to circulate air through the appliance cavity or cooling channels
• Restores proper ventilation when the original motor hums, fails to start, or produces weak airflow
• Helps prevent overheating by maintaining designed airflow rates
• Quiets abnormal noise caused by a failing motor bearing or imbalance

• One fan motor as shown

• Turn off power to the appliance at the breaker before beginning any repair
• Remove access panels and disconnect wiring harness; note connector locations for reassembly
• Handle the blower wheel and motor housing carefully to avoid bending blades or damaging mounts

The Water Valve is an OEM part for Bosch refrigerators. It controls the supply of water to the ice maker and water dispenser. Proper functioning is essential for usability.

Causes of a bad water valve may include mineral buildup disrupting flow over time, freezing damage during power outages, or wear from heavy use.

Symptoms include:

• No water dispensed from the refrigerator door
• Ice maker not able to produce ice properly
• Leaks or water spots around the valve area
• Strange noises coming from the valve mechanism

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Control Board is an OEM component specifically designed for select Bosch refrigerators. As the crucial internal CPU, it directs all cooling, temperature regulation, and auxiliary feature functions.

Causes requiring replacement relate to long-term stresses from routinely powering temperature sensors and controlling airflow mechanisms. Damage during maintenance procedures may also necessitate updating this vital module.

Symptoms signaling board failure include:  

• Inability to lower interior temperatures below safety thresholds
• Fluctuating or unresponsive temperature readout displays
• Inoperative auxiliary settings like water/ice dispensing

This OEM Bosch replacement control board is also compatible with Thermador, Gaggenau, and some full-bodied Kenmore refrigerators utilizing identical heating performances. Reinstallation will restore the intended preservation capabilities.
 

This drain gutter is the molded channel that collects and directs wash water toward the dishwasher drain, helping prevent pooling at the tub base and under the door. It restores proper water flow inside the lower tub area. What it does:

• Channels leftover wash and condensation to the pump/drain to avoid water buildup under the door
• Helps reduce leaks and water pooling at the bottom front of the tub
• Replaces cracked or warped gutters that cause misdirected drainage or visible water inside the door area
• Matches OEM shape so water follows the intended path to the drain system

• One drain gutter

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door or lower access panel per the service instructions to reach the gutter
• Handle carefully to avoid damage to the molded edges and to prevent contact with sharp cabinet or panel edges
• Secure mounting so the gutter seats fully to the tub and mates properly with adjacent seals

This electronic control unit manages a dishwasher's timing, cycle selection and user interface, restoring normal operation when the main control fails. Replaces a faulty control board to help the appliance respond to commands and complete cycles. What it does:

• Receives input from buttons/touchpad and runs selected wash cycles
• Manages timers, relays and signals to pumps, valves and heaters
• Monitors sensors and status to advance or pause cycles
• Common symptom: appliance won't start or buttons are unresponsive
• Common symptom: cycles stop mid-run, or control shows error codes

• One control unit (electronic control board)

• Disconnect power (and water if applicable) before starting any repair
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Verify connector orientation and seat all wiring firmly during reassembly

This replacement fixture is the mounting bracket used to secure internal components inside the appliance, helping restore proper alignment and stable operation. It's a direct-fit replacement when the original bracket is cracked, bent, or missing. What it does

• Provides a stable mounting point for internal parts to prevent movement or misalignment.
• Restores proper positioning that can reduce noise or rattling caused by a loose bracket.
• Helps ensure connected components operate reliably by keeping them secured.
• Common symptom: visible damage, loose parts, or unusual noise from inside the appliance.

• One replacement fixture (mounting bracket) as shown.

• Basic mechanical replacement; no special tools typically required beyond common screwdrivers.
• Disconnect power and/or disconnect appliance from power source before beginning any repair.
• Handle mounting points and nearby wiring with care to avoid damage; verify correct alignment before tightening fasteners.

This fan motor powers the appliance's blower assembly to move air for proper ventilation and cooling. Replaces a worn or failed motor to restore airflow and reduce overheating or poor venting. What it does:

• Spins the blower wheel to circulate air through the appliance cavity or cooling channels
• Restores proper ventilation when the original motor hums, fails to start, or produces weak airflow
• Helps prevent overheating by maintaining designed airflow rates
• Quiets abnormal noise caused by a failing motor bearing or imbalance

• One fan motor as shown

• Turn off power to the appliance at the breaker before beginning any repair
• Remove access panels and disconnect wiring harness; note connector locations for reassembly
• Handle the blower wheel and motor housing carefully to avoid bending blades or damaging mounts

This fan motor powers the appliance's blower assembly to move air for proper ventilation and cooling. Replaces a worn or failed motor to restore airflow and reduce overheating or poor venting. What it does:

• Spins the blower wheel to circulate air through the appliance cavity or cooling channels
• Restores proper ventilation when the original motor hums, fails to start, or produces weak airflow
• Helps prevent overheating by maintaining designed airflow rates
• Quiets abnormal noise caused by a failing motor bearing or imbalance

• One fan motor as shown

• Turn off power to the appliance at the breaker before beginning any repair
• Remove access panels and disconnect wiring harness; note connector locations for reassembly
• Handle the blower wheel and motor housing carefully to avoid bending blades or damaging mounts

This fan motor powers the appliance's blower assembly to move air for proper ventilation and cooling. Replaces a worn or failed motor to restore airflow and reduce overheating or poor venting. What it does:

• Spins the blower wheel to circulate air through the appliance cavity or cooling channels
• Restores proper ventilation when the original motor hums, fails to start, or produces weak airflow
• Helps prevent overheating by maintaining designed airflow rates
• Quiets abnormal noise caused by a failing motor bearing or imbalance

• One fan motor as shown

• Turn off power to the appliance at the breaker before beginning any repair
• Remove access panels and disconnect wiring harness; note connector locations for reassembly
• Handle the blower wheel and motor housing carefully to avoid bending blades or damaging mounts

This fan motor powers the appliance's blower assembly to move air for proper ventilation and cooling. Replaces a worn or failed motor to restore airflow and reduce overheating or poor venting. What it does:

• Spins the blower wheel to circulate air through the appliance cavity or cooling channels
• Restores proper ventilation when the original motor hums, fails to start, or produces weak airflow
• Helps prevent overheating by maintaining designed airflow rates
• Quiets abnormal noise caused by a failing motor bearing or imbalance

• One fan motor as shown

• Turn off power to the appliance at the breaker before beginning any repair
• Remove access panels and disconnect wiring harness; note connector locations for reassembly
• Handle the blower wheel and motor housing carefully to avoid bending blades or damaging mounts