Parts for Bosch B36IB70NSP/12: Compressor Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Power cord for refrigerators and freezers. Connects appliance to wall outlet. Replace if cord is frayed, damaged, cracked, or missing its prongs.

Leveling foot installs at the refrigerator base to support and level the unit. Replace if worn, cracked, broken, or missing to restore stability.

Fix water dispenser not working or leaking with this outlet valve. Controls water flow from reservoir to dispenser. Moderate 30-45 minute repair.

Mounting clip for refrigerator interior components. Secures shelves, bins, or panels in place. Replace if cracked, broken, or missing for proper fit.

Fixes incorrect temperature readings or frequent cycling. This thermistor monitors compartment temp for proper cooling. Moderate DIY repair, 30-45 minutes.

Replacement wheel for refrigerator and freezer models. Installs on the base to support rolling movement. Needed when original is cracked, worn, or broken.

The Power Module is an OEM part for Thermador refrigerators. It receives signals from the user interface and sensors, and then processes and communicates the necessary commands to the different components of the refrigerator, such as the compressor, fans, and defrost system.

A bad power module can occur due to electrical surges, component failure, or internal malfunctions. Signs of a faulty board include erratic temperature control, unresponsive user interface, or complete loss of functionality.

Symptoms of a bad power module include:

• Inconsistent temperature control 
• Unresponsive user interface 
• Complete loss of power  

Replace your malfunctioning power module with this genuine OEM Thermador part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Condensate water container collects moisture from your refrigerator's cooling system. Replace if cracked, broken, or leaking to prevent water damage.

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

This plate is a replacement support plate used in the appliance's internal assembly to secure and stabilize components. It restores correct positioning of attached parts so assemblies sit firmly and operate quietly. What it does:

• Provides a stable mounting surface to hold internal components in proper alignment
• Helps reduce movement and vibration of attached parts during operation
• Keeps assemblies secured to prevent rubbing or interference with other parts
• Supports reliable operation by maintaining correct spacing and positioning

• One replacement plate as shown

• Verify appliance is powered off and disconnected before starting any repair
• Inspect surrounding fasteners and mounting points; replace any damaged hardware
• Tighten screws to snug only—avoid over-torquing which can deform the plate

Interior mounting plate for bottom-mount refrigerators and freezers. Replaces cracked, broken, or missing plates that secure internal components.

Hearing rattling or loose parts inside your refrigerator? This mounting bracket secures internal components to eliminate noise and restore proper alignment.

Lower trim panel that covers the kick area at the bottom of your refrigerator. Replace if cracked, dented, or missing to restore a finished look.

Decorative base panel that covers the bottom front of your refrigerator. Replace if cracked, broken, discolored, or missing to restore appearance.

Adhesive mounting tape secures trim, wiring, and small components while reducing rattles and moisture intrusion. Replace when worn or loose. Verify fit with your model number before ordering.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

The Housing is an OEM part for Bosch refrigerator and freezers. This part encases the water filter, ensuring it is securely positioned within the appliance to effectively filter out contaminants from the water supply. 

The need for replacing the Housing can arise from physical damage, such as cracks or breaks, which can occur from accidental impacts during filter changes or general wear and tear over time. 

Symptoms of a compromised Housing include:

• Leaks or dripping water near the filter area, indicating that the housing may be cracked or not sealing properly.
• Difficulty in installing or removing the water filter, which could suggest that the housing is damaged or warped.
• Unfiltered water taste or odor, hinting at an improperly seated filter due to a faulty housing.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Fixes ice maker overflow and water leaking into freezer. This water inlet valve controls water flow to your dispenser and ice maker. DIY repair.

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Secures the water filter in your refrigerator for a snug, leak-free fit. Replace if lost during filter changes, cracked, damaged, or worn out over time.

Refrigerator not cooling or running constantly? This compressor powers your cooling system. Advanced repair requiring refrigerant handling expertise.

Replace a cracked or missing housing cover that exposes internal components to debris and moisture. Restores proper sealing and component protection.

Fix control panel issues or unit not responding with this refrigerator control transformer. Steps down voltage to power electronic controls reliably.

A replacement shock absorber that cushions and appliance component to reduce noise and stabilize movement for smoother, more controlled operation. Restores dampening to doors or tubs that close unevenly or vibrate. What it does:

• Dampens and slows movement to prevent slamming and reduce impact wear
• Stabilizes panels or tubs to cut down on vibration and rattling sounds
• Helps maintain even, controlled closing and opening motion
• Commonly used when a door feels loose, drops, or closes too quickly

• Disconnect power (and water if applicable) before attempting service
• Retain original mounting hardware; only replace items explicitly listed as included
• Ensure correct orientation and secure fasteners; test operation after installation

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Refrigerator not cooling or compressor not starting? This start relay controls the signal that initiates the compressor. Direct replacement part.