Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.
This gasket-cylinder head is a genuine Midwest Engine part. It is manufactured as a replacement part for small engines used on various types of lawn and garden equipment, primarily made by Briggs and Stratton. This type of gasket helps seal the cylinder head. It is an important part on these machines, and it is normal for this part to crack or become worn over time. It is a relatively simple replacement to make, but it may require disassembly of parts of the engine.This gasket-cylinder head is a genuine OEM part sourced directly from the manufacturer. It is sold individually and made of durable composite materials. It is compatible with many Briggs and Stratton machines, as well as Simplicity machines.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a crankcase gasket that is used in lawn and garden equipment. It is responsible for creating an airtight seal between the cylinder assembly and the crankcase. The part is made of durable composite material, but over time it can deteriorate or break. If this happens, the other components will no longer have the appropriate seal and the tool will not work correctly. Replacing the crankcase gasket requires putting the equipment on a stable surface and disconnecting the spark plug wire. The equipment will need to be disassembled before turning the focus to the engine. Disassemble the motor to gain access to the crankcase gasket and any other damaged component inside. The replacement process will require the use of a pair of pliers, a wrench set, and a socket set. Remove the old crankcase gasket and place the new one in the same location. Reassemble all the parts to use the tool in the future.This crankcase gasket is sold as an individual part. It is an authentic OEM replacement part sourced directly from the manufacturer. This part is compatible with lawn mowers, snowblowers, and wood chippers manufactured by Simplicity, Cub Cadet, and Briggs & Stratton.
This screw is a genuine Midwest Engine part, sold individually. This screw can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, and wood chippers. The purpose of a screw in such outdoor appliances is to provide a secure fastening for two or more components to one another through the piercing of the screw into the components and the rotation of the screw so that its placement is stable.The screw of a small engine outdoor appliance is a small component that can be easily lost or misplaced. If the screw is stripped or otherwise damaged, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, Craftsman, Cub Cadet, Murray, Lawn Boy, MTD, and Simplicity.
The oil drain plug plays an important role in lawn and garden machines, although most only realize how important it is when it is not working properly. The plug fits into the oil drain at the bottom of the motor. It is removed to allow the oil to be drained from the motor when changing the oil. The durable oil drain plug may need to be replaced if it is no longer working properly. There could be leaks that allow the oil to escape from the motor, which would indicate it needs to be replaced. If the plug is lost, it will need to be replaced, as well. The genuine OEM replacement oil drain plug is sold individually. It is used for lawn mowers, snowblowers, tillers, leaf blowers, pressure washers, chainsaws, edgers, log splitters, wood chippers, heat pumps, generators, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Kenmore, Toro, Cub Cadet, Homelite, Murray, Lawn-Boy, Snapper, and Simplicity.
This bulkhead is the structural panel that supports and seals the washer tub and provides mounting points for related components. It restores proper alignment and containment so the washer can hold and drain water correctly. What it does:
This is a genuine replacement oil fill cap that is found on many lawn and garden engines. The oil fill cap is responsible for securing the oil dipstick and fill tube. This small plastic plug screws into the oil fill tube with plastic threads and secures the oil, keeping it from leaking and providing the appropriate engine pressure. Over time, this small plastic piece can become worn, corroded, damaged, or even lost, which will require a full replacement. Without an oil fill cap, the pressure cannot be maintained in the engine and the oil could spill out of the machine. This genuine OEM oil fill cap is manufactured by Briggs & Stratton to exact standards. It is compatible with engines and equipment from this brand, as well as those from Toro, Snapper, and Vanguard. The oil fill cap is sold as an individual part and does not include the dipstick or any other parts and accessories. It is a good idea to inspect caps and other elements when performing maintenance to ensure proper operation. When replacing the filler cap, no tools are required, but the engine should be cool before doing any kind of work.
The flywheel key is the component on outdoor equipment that keeps the flywheel connected to the crankshaft. Over time, this key may become damaged or broken, particularly if the engine experiences a forceful stop, like hitting a large stationary object. If the flywheel key breaks, the engine will not start. A slightly damaged flywheel key is noticeable through symptoms like misfiring, backfiring, or having no power. If any of these are occurring, the flywheel key should be replaced to prevent complete engine failure.A flywheel puller tool is required for this repair. Make sure the engine is cool before working on the flywheel. Wear safety gear, including gloves and eye protection. Disconnect the spark plug and remove the blower housing. Remove the flywheel mounting nut and set it aside. Take the recoil starter cup off the mower. Use the flywheel puller to remove the flywheel and access the flywheel key. Remove the broken flywheel and replace it with the new flywheel. Reverse the steps to put the mower back together.This flywheel key is made of an aluminum alloy and is sold as an individual part. It is designed for use in lawnmowers, lawn tractors, and other small engines manufactured by Briggs and Stratton, Toro, Lawn-Boy, Simplicity, MTD, and others.
A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.
This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.
This is a genuine float needle valve that is designed to be used in select small engines found in lawn tractors. The float needle is located in the carburetor and is responsible for assisting with the intake and outflow of gas through the assembly. As the fuel bowl in the carburetor fills and drains, this needle regulates how much fuel is present to ensure the proper operation of the engine. Over time, the valve can become cracked or get damaged because of repetitive motion and exposure to high heat. This could impact the flow of fuel and the engine performance, or cause the engine to fail completely. This genuine OEM float needle valve is manufactured to exact standards as an identical replacement for select Briggs & Stratton small engines found in lawn tractors. It can also be used with certain models from Toro and Vanguard. It is sold as an individual unit and made of durable plastic. Be sure to drain the fuel from the engine and allow it to cool before doing any repairs. Gloves are also recommended for safety. For those who need additional components, this valve may also be available as part of a compatible carburetor rebuild kit.
This is a carburetor overhaul kit. This kit contains all of the needed components to rebuild the carburetor for lawn and garden equipment engines. A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps regulate the amount of fuel that is in this mixture. The gaskets create a seal that keeps unnecessary air out so that the engine works properly.A carburetor overhaul kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance. Signs that there are carburetor issues include engine roughness when it's at idle, engine vibrations, misfires, or it hesitates under acceleration. Signs that the carburetor diaphragm has gone bad include the engine not starting, cutting off while running, producing excessive smoke, or revving on its own. All of these signs indicate that a carburetor overhaul kit is needed.This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This kit is compatible with lawn tractors manufactured by Midwest Engine and Briggs & Stratton.
This is a carburetor float that is used in a wide variety of lawn and garden equipment. The carburetor float is used in the engine to close and open the float needle valve. The main responsibility of the carburetor float is to open up to allow fuel into the carburetor when drained and to shut off the flow of fuel if the bowl is filled. If the float isn't working properly, the engine may not idle, the carburetor can flood, and the motor may stall while the tool is in use.Before replacing the carburetor float, put on work gloves and disconnect the spark plug wire. The carburetor will need to be removed from the equipment. The carburetor float and any other malfunctioning parts can be taken out and replaced with new components. While working on the parts, the jets can also be cleaned as a maintenance process.This carburetor float is sold as an individual item. It is an authentic OEM replacement part sourced directly from the manufacturer. The float is designed to be used with lawnmowers, lawn tractors, wood chippers, and snowblowers manufactured by Cub Cadet, Briggs & Stratton, MTD, Toro, and Simplicity.
This part is a float bowl gasket. It is manufactured for use on a variety of outdoor power equipment engines. The float bowl gasket is a flexible plastic component that is fitted into the carburetor and creates a seal that protects the float bowl from debris, dust, and air leakage. A new float bowl gasket may be needed if there is leakage. The floats themselves can be visually inspected for any signs of damage or wear and the float bowl gasket can be replaced if there are signs of either. If the operator can hear gas inside of the floats, then a new float bowl gasket will be needed.This is a genuine OEM part sourced directly from Midwest Engine. It is sold individually. This float bowl gasket is compatible with lawn tractors manufactured by Midwest Engine, Briggs & Stratton, or Toro.
This air cleaner gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as wood-chippers, snowblowers, leaf blowers, and lawn mowers. The function of an air cleaner gasket is to seal off and protect the engine from the accumulation of dirt, debris, and gunk in the infrastructure.The air cleaner gasket could be subject to damage from overuse or general wear and tear. If the air cleaner gasket is not sealing, thereby preventing the primer bulb from operating as usual and failing to protect the engine from outside dirt and debris, the part should be replaced immediately. The appliance at hand should not be used until the air cleaner gasket has been replaced. Before purchasing a replacement air cleaner gasket, determine whether or not the problem in question is attributable directly to the air cleaner gasket or if the engine is malfunctioning for another reason.This air cleaner gasket is compatible with the following brands: Briggs and Stratton, Simplicity, and Cub Cadet. This part sold individually.
O-rings are used in various locations and applications to seal and protect connections throughout the engine. The O-ring is typically used for rigid connections where a proper seal is required for optimal functioning. It is critical to have the right size and style of O-ring installed for proper operation. These parts tend to wear over time and that can affect their ability to seal. If O-rings are degraded or damaged in any way, they need to be replaced as soon as possible to prevent further damage. This O-ring is manufactured to exact specifications by Briggs & Stratton to provide a genuine OEM replacement. It can be used in various Toro, Briggs & Stratton, and Lawn-Boy engines. Typically found in lawn tractor engines, this part is compatible with more than 150 machines. This O-ring is made from durable materials and sold individually. Always disconnect the spark plug before beginning engine work and wear gloves for hand protection.
This replacement part is a nut. This part is small but important in various types of equipment. Nuts are able to work with other small parts such as washers and screws to secure equipment components in place.If a nut has become stripped or worn down over time, it is possible that it can no longer perform the function needed. Be sure to wear work gloves when working with small parts such as nuts to prevent injury during the repair. This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.
This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.
This is an inline fuel filter and is an essential part of a fuel system. This part can be found inside the fuel tank or fitted into the fuel line. The fuel filter is responsible for straining particles like water and debris in the fuel so that they won't reach and clog the combustion chamber and eventually reduce the engine's performance. Annoying sputters when starting equipment and uneven idling are incidents that may be related to a clogged fuel filter. To remove a fuel filter, first cut off the fuel supply and then slide the fuel clamps away to remove the filter. Remember to work in a well-ventilated area, with no open flame or fire source, when installing this component. This part works with lawn mowers, snowblowers, tillers, generators, wood chippers, and others with small engines. It is compatible with brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn Boy, Snapper, and Simplicity. This is a manufacturer-supplied OEM replacement part and comes as an individual component.
Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.
This is an authentic muffler deflector screw that is found in small engines for outdoor power equipment from Briggs & Stratton. This metal screw is designed to secure the muffler deflector to the flywheel. In select models, it may also be used to secure the starter clutch to the flywheel. The screw is durable but exposed to high heat and constant wear, which means that it can become damaged or worn with regular use. If the screw is lost or damaged, it will need to be replaced. It should always be replaced with a genuine OEM part. This OEM muffler deflector screw is manufactured by Briggs & Stratton to exact standards and is compatible with several models of small engines. It can be used with various models of blowers, pressure washers, generators, and snow throwers from Toro, Murray, and Briggs & Stratton. It is sold as an individual replacement part. To replace this screw, the flywheel cover will need to be removed. Then, if it is still present, the old screw will need to be removed and the new one can be installed. This screw requires a hex or Torx screwdriver to install. Always wear gloves and disconnect the spark plug for safety when performing engine repairs.
This is a screw that is used in many types of lawn and garden equipment, including lawnmowers and wood chippers. It comes with a black finish and is made of durable metal. The screw can be used in many locations on a tool to attach two components together. Screws can also be used in tandem with nuts, but the two components should have the same threading and finish.Screws can become damaged, break, or be stripped and will need to be replaced. Corrosion, extreme temperatures, and unexpected stress can all lead to issues with a screw. A visual inspection can indicate whether the screw should be replaced. If it does need replacement, a screwdriver can be used to remove the original screw. The new component can be placed and tightened.This screw is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The screw can be used with many types of lawn and garden equipment, including lawnmowers, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and snowblowers manufactured by Briggs & Stratton, Cub Cadet, Craftsman, Murray, Wheel Horse, Lawn-Boy, MTD, MasterCut, Simplicity, and Toro.
This genuine OEM part is a rocker switch for lawnmower engines. A rocker switch is the component that allows the user to power the engine. If the rocker switch is no longer functioning and not turning the engine on and off as intended, it might need to be replaced. While replacing a rocker switch may seem like a difficult task, it is actually a simple fix.To replace the rocker switch, pry it off using a flathead screwdriver. Once removed from the mower, unplug the wire harness attached to it. Once unplugged, replace with the new switch. Snap the switch back into its original position and test if it has been installed correctly. If the mower turns on and the engine is able to start, then the installation was a success.This replacement part is sold individually and is compatible with Briggs and Stratton lawnmowers.
The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.
This is a general use replacement screw. It is a standard piece of hardware for securing various components on lawn and garden equipment that will have multiple locations and uses based on the equipment model. Owners should refer to diagrams for proper location and application of this part. As a securing tool, this screw can become worn over time. The threads can strip or the screw can become lost during other repairs. This is when a replacement may be needed. Because this is a general-use part, it might be a good idea to keep a few extras on hand. This genuine replacement screw is designed for use with Briggs & Stratton, Toro, and Murray lawn and garden machines, including over 150 models of generators, tractors, snowblowers, and pressure washers. The screw can be replaced with a wrench in all applications and should only take a few minutes to fix. This durable screw is made of sturdy metal and sold as a single unit. Those who need additional screws will have to order multiple quantities.
This replacement part is a rewind starter. This is a genuine replacement part made by Midwest Engine. A rewind starter, sometimes called a recoil starter, allows the operator to start the engine of certain types of lawn mowers. The user is able to start the engine by hand by cranking the system. A new rewind starter might be needed if the user is unable to start the engine as they typically would. Be sure the engine is completely turned off before replacing this part. It is recommended that the user wear work gloves when repairing or replacing parts close to the engine of any machine. This rewind starter is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.
This part has been discontinued by the manufacturer and is no longer available.
The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.
This replacement spark plug boot is used with a range of lawn and garden machine engines. The spark plug boot is also called a coil boot and an ignition boot. It creates voltage and mounts on top of each spark plug. It connects the spark plug to the ignition coil. Over time, the spark plug boot could start to wear down. This could be due to normal wear and tear or because of an issue of a faulty boot. Regardless, it will need to be replaced. If it is not working properly, it will be difficult or even impossible to start the engine. This is a genuine OEM replacement spark plug boot that is sold individually. The boot can be used with many models of Lawn Mower, wood chipper, snowblower, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, MTD, and Simplicity. Buyers should always ensure they are choosing the correct spark plug boot for their make and model.
This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.
This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.
This replacement valve seal is a genuine OEM part for a lawn tractor or mower. The valve stem is a type of valve that transfers oil into the cylinder and then immediately reseals due to the pressure in the chamber. However, if the seal is damaged, it will not close and oil will leak into the cylinder. If this happens, the cylinder head may become overly lubricated and not run well. This seal helps prevent that from happening. It fastens to the intake valve and valve stem keeper. Seals will naturally wear out over time due to stress and exposure to corrosive oxidizing agents in an engine. When this happens, the valve will leak oil. To test if the valve seal is compromised, look for whitish-grey smoke that indicates burning oil and also measure to see how much oil the engine is consuming. If the seal is breached, use a screwdriver and socket wrench set to change out the part. This top of the line replacement valve seal is compatible with Briggs & Stratton, Toro, and Lawn Boy lawn tractors. It is sourced from the original manufacturer and ships individually.
This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This genuine starter solenoid transfers electrical current from the battery to the starter during the engine starting process, allowing the engine to engage. This part could become worn over time or develop electrical malfunctions, which could eventually lead to a need for a full replacement. In the event that the solenoid goes bad, it could result in poor engine performance or not permit the engine to start at all. This replacement part could provide an exact fit for compatible lawn and garden units. This genuine OEM solenoid from Briggs & Stratton is manufactured to exact specifications. It is compatible with engines used in select models of generators and other lawn and garden equipment made by the brand. This genuine OEM part is sold individually and does not include any hardware or additional components. It is imperative to disengage the spark plug and allow the engine to cool before performing engine repairs like replacing the starter solenoid. A wrench or socket set will be required to disconnect the old solenoid and install the new unit and gloves should be worn for hand protection.
This is a fuel cut-off value that is used in over 150 different small gasoline-powered engines. Those devices that have this value include power vacuums, leaf blowers, pressure washers, and generators. The fuel cut-off valve is a safety feature that sits on the bottom of the fuel tank. In situations where the engine must be cleared of gasoline, this valve is very useful. It allows the gasoline in the fuel line to continue to the carburetor and to be combusted in the cylinder. Once the engine block is drained of gasoline, no further ignition of fuel is possible until the cut-off is reactivated. Although it is out of the way of casual contact, the cut-off can be bumped and damaged by contact with other tools, hoses, or debris. Also, since it is a narrow passage through which gasoline passes, it is possible for contaminants to jam the flow and create a blockage. If the tank is full of gasoline and the carburetor is functioning normally, an engine that won't offer to start at all may be the victim of a faulty cut-off fuel valve. This OEM genuine replacement is compatible with Toro and Briggs and Stratton engines.
The pre-cleaner is usually placed over the actual air filter and is designed to catch debris and emissions before they enter the air filter, which will then clean the rest of the air going through the machine. The pre-cleaner can become dirty and clogged with debris as a part of regular use. As such, it should be replaced as part of a regular maintenance routine. However, it may also need to be replaced intermittently if it becomes clogged. An air filter or pre-cleaner is clogged if the engine will not run as smoothly as it should. Always check the manual for compatibility and part numbers, as well as any safety and replacement recommendations. This unit can be installed dry and does not require any special preparation or pre-oiling. This part replacement is suggested as maintenance because you may not be able to tell it is dirty until it is removed from the air filter, but a replacement is easy to perform. This OEM replacement pre-cleaner is compatible with various models of air filters in Briggs & Stratton engines. Be sure to check your user manual for part number compatibility and always wear gloves when replacing engine components.
An ignition key set is used with a variety of lawn and garden equipment. When it's turned in the ignition slot, it will start the lawnmower, pressure washer, or other equipment. This set comes with two keys and a keyring to make it less likely that one will be lost. Ignition keys sometimes become damaged or broken and some people lose them, which means a replacement set is required.If a set of keys is lost or has been damaged, a new set will be needed to operate a lawnmower or other equipment. There is no installation process involved, so there's no need for additional tools. Once the replacement ignition key set is acquired, it can be used to get equipment back up and running. Simply turn the key to engage the motor and the lawn equipment will be ready to use.This ignition key set is designed for use with lawnmowers, wood chippers, snowblowers, generators, tillers, and pressure washers. It is compatible with equipment from Briggs & Stratton, Simplicity, Craftsman, Snapper, Cub Cadet, and Murray. This is a genuine OEM replacement part that comes as an individual component that consists of two silver keys on a ring.
This brush retainer is part of the starter motor on many types of lawn and garden machinery. It comes with both the retainer and a set of four brushes. The main job of the brush retainer is to hold a set of carbon brushes against the commutator bars located on the armature. If the brush retainer is worn, damaged, or improperly seated, it can cause problems with the equipment. The starter motor will not be able to get the proper amount of current from the battery.If the brush retainer might be causing problems, a visual inspection can be performed. A damaged brush retainer can wear down to the wire lead and become burned, pitted, or cracked. When the brush retainer is worn out, it can decrease engine performance, reduce braking, and cause the motor to lose power. This brush retainer is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. The retainer is made to be used with lawnmowers, snowblowers, tillers, and wood chippers created by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.