Parts for Briggs & Stratton 192412-1198-E2: Control Brackets, Springs, Fuel Tank, Lines, Filter Parts

This genuine Midwest Engine fuel line controls the flow of fuel into the carburetor, where it combines with the airflow through a series of valves in order to ignite and start the engine. The fuel line of a small engine outdoor appliance might have to be replaced if there is damage that hampers the ability of the fuel line to connect to the carburetor and provide it with the gas it has to combine with air in the proper ratio. Fuel lines are most likely to withstand damage from flying debris, dirt, pebbles, and other such small materials that can get sucked in and accumulate in the engine. Fuel lines can also undergo damage in the form of punctures, tears, rips, and erosion to the material such that fuel cannot pass through it without leaking. This damage will necessitate the removal and replacement of the fuel line before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel line is compatible with the following brands: Midwest Engine, Briggs & Stratton, and Simplicity. It can be used as a replacement part for the small engines of outdoor appliances such as lawn tractors, lawn tractors, snowblowers, wood chippers, leaf blowers, tillers, and edgers. This part is sold individually.

This is an inline fuel filter and is an essential part of a fuel system. This part can be found inside the fuel tank or fitted into the fuel line. The fuel filter is responsible for straining particles like water and debris in the fuel so that they won't reach and clog the combustion chamber and eventually reduce the engine's performance. Annoying sputters when starting equipment and uneven idling are incidents that may be related to a clogged fuel filter. To remove a fuel filter, first cut off the fuel supply and then slide the fuel clamps away to remove the filter. Remember to work in a well-ventilated area, with no open flame or fire source, when installing this component. This part works with lawn mowers, snowblowers, tillers, generators, wood chippers, and others with small engines. It is compatible with brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn Boy, Snapper, and Simplicity. This is a manufacturer-supplied OEM replacement part and comes as an individual component.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This valve fuel shut off is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, leaf blowers, chipper shredders, and snowblowers. The valve fuel shut off serves as a basic safety and maintenance feature which temporarily blocks fuel from reaching the engine. This valve might be used when performing work on the engine, when transporting the appliance, or to generally prevent oil leakage and flooding in certain scenarios.The valve fuel shut off could be subject to damage in the long-term from general use. If there is oil inexplicably found leaking into the carburetor, the float chamber, or the intake valve, thereby causing engine damage or hydraulic lock, there might be damage in the valve fuel shut off. If that is the case, this genuine OEM replacement part will be essential. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This valve fuel shut off is compatible with the following brands: Briggs and Stratton, Toro, Cub Cadet, and Simplicity. This part is individually sold and any additional parts needed will have to be purchased separately.

The fuel tank is a genuine OEM replacement for select Briggs & Stratton engine models. This 4-quart fuel tank is mounted on the engine and is designed specifically for remote mounting. This tank holds the fuel and connects via fuel lines to the carburetor to provide fuel to the engine. Over time, this tank can become damaged or worn out. Some owners may just want to upgrade to a remote mounting tank from their original model. This replacement tank includes the fuel cap and tank assembly and offers an exact fit for compatible models. This OEM fuel tank is used with various models of push mowers that include a compatible Briggs & Stratton engine. These include mowers from Briggs & Stratton, Troy-Bilt, and others. This fuel tank is made of durable plastic material and sold as an individual unit. Always drain the fuel system completely when installing a new fuel tank and ensure a secure installation and check for fuel leaks after replacing the tank. Wear gloves when performing equipment repairs for hand protection.