Parts for Ge CHS90XP2M2S1: Control Panel & Cooktop Parts

This stainless steel manifold panel replaces the front control/manifold assembly on compatible ranges and cooktops to restore appearance and protect controls. It provides a clean, durable surface where knobs and switches mount. What it does:

• Covers and protects control valves, switches and internal components from spills and debris
• Restores the factory look when the original panel is dented, scratched or corroded
• Provides proper mounting surface and alignment for control knobs and bezels
• Helps ensure controls remain accessible and unobstructed during normal use

• Disconnect power (and gas supply for gas models) before beginning service.
• Remove control knobs and any trim before replacing the panel to avoid damage.
• Retain and reuse factory screws and clips unless damaged; align tabs and secure evenly.

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

Control module assembly for electric and gas ranges. Mounts inside the control panel. Replace if module is damaged, cracked, or connections are worn.

This hot surface indicator is the replacement indicator light that shows when an electric cooktop surface is still hot, helping prevent accidental burns and improving user awareness after cooking. Fits select electric ranges and cooktops. What it does:

• Illuminates when a cooktop heating element or radiant surface remains hot after use
• Signals residual heat even if the element is off, reducing burn risk
• Replaces a cracked, non-lighting, or intermittently working indicator light
• Works with the range/cooktop's surface control circuitry to display status

• Disconnect power to the appliance at the breaker before beginning any work
• Replacement typically involves removing the cooktop glass or control panel
• Handle the indicator and surrounding glass carefully to avoid damage or misalignment

This indicator sleeve is a small control-knob marker that restores a clear position marker and snug fit on the control shaft for reliable setting selection. It improves dial visibility and stabilizes the knob during use. What it does:

• Covers and centers the control shaft so the knob sits straight and turns smoothly
• Provides a visible pointer for selecting temperature or power settings
• Replaces cracked, worn or missing sleeves that make knob position hard to read
• Helps eliminate wobble or looseness between the knob and control shaft

• One indicator sleeve

• Disconnect power to the appliance before servicing
• Remove the control knob (pull straight off) to access the sleeve
• Press the sleeve onto the shaft by hand until fully seated; no special tools generally required
• If the knob or shaft is damaged, inspect and replace as needed for secure fit

This lower oven warming element heats the oven's warming/holding compartment so food stays warm until serving. Replaces a damaged or non-heating lower element to restore consistent low-temperature operation. What it does:

• Heats the oven's warming/lower compartment for holding cooked food
• Replaces elements that show visible damage, burn-through, or no heat output
• Helps restore even low-temperature performance when the warmer function fails
• Works with the oven's temperature control and safety circuits to provide steady heat

• One lower oven warming element

• Disconnect power at the breaker before beginning any repair
• Wear gloves; element edges and terminals may be sharp
• Verify proper wiring and secure terminal connections during installation

This induction cooktop element replaces a failed high-power burner to restore normal cooking performance on compatible induction ranges. It provides the heating coil assembly required for fast, responsive induction heating. What it does:

• Replaces the induction heating element that generates the magnetic field to heat cookware.
• Restores a burner that no longer heats, heats intermittently, or shows reduced power.
• Helps eliminate error conditions or cooktop lockouts caused by a faulty element.
• Matches the OEM wattage rating for high-output cooking performance.

• Disconnect power at the breaker before servicing; glass cooktops and wiring can be hazardous.
• Handle the glass surface and element assembly carefully to avoid cracks or damage.
• Installation may require removing the cooktop glass and disconnecting wiring—keep fasteners and wiring order noted.

This LED/encoder board kit replaces the control-panel electronics that manage the display lights and user input encoder so your range's front control responds correctly and the display indicators light as expected. What it does

• Powers and drives the control panel LED indicators so status lights and numeric displays illuminate
• Interprets rotary encoder/button input so knob turns and button presses register correctly
• Can resolve symptoms like blank or flickering display, unresponsive controls, or incorrect indicator lights
• Works as the electronic interface between the user controls and the main control board

• Disconnect power at the breaker before removing the oven/range control panel to avoid shock
• Use ESD precautions and handle the board by the edges to avoid static damage
• Keep track of hardware

This is a replacement screw used to secure panels and components on compatible appliances, providing reliable fastening to stop loose parts and noise. It restores proper fit where the original fastener is missing or damaged. What it does:

• Fastens control panels, brackets, or trim to appliance chassis
• Keeps components aligned to prevent rattling or vibration
• Replaces stripped or corroded mounting screws
• Restores secure connections that can cause gaps or poor fit

• Disconnect power before servicing the appliance
• Use the correct-size driver or socket to avoid stripping the head
• Thread in carefully and avoid over-tightening to prevent damage
• Check that the screw seats flush and secures the component fully

Trim kit for electric and gas ranges. Installs around the cooktop or control panel. Replace if cracked, discolored, warped, or missing pieces affect appearance.

Fix an unresponsive or cracked touch control panel with this glass touch control board assembly. Restores oven controls, timers, and settings display.

Seals the air duct beneath your induction cooktop to maintain proper airflow and prevent heat or steam leakage. Replace when worn or damaged. Verify fit by model number.

This fastener nut secures appliance components and wiring connections to keep assemblies stable and aligned during normal operation. It's a small replacement part that restores proper fastening where the original nut is missing, stripped, or damaged. What it does:

• Secures mounting studs, terminals, or brackets to prevent parts from coming loose
• Restores a solid mechanical and electrical connection where a worn or missing nut causes poor contact
• Helps stop vibration-related noise or movement from loose assemblies
• Used wherever a matching threaded stud or bolt requires a retained fastener

• One replacement nut (quantity: 1)

• Disconnect power and water before servicing the appliance
• Start threads by hand to avoid cross-threading; then tighten with the correct size wrench or socket
• Tighten securely but do not overtighten—over-torquing can strip threads or damage components
• Replace if threads are damaged, corroded, or if the nut no longer holds securely

Replacement 8-18 x 5/16 screw secures range panels, brackets, and components. Needed when original fastener is stripped, missing, or damaged.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Metal angle support bracket that secures interior panels, shelves, or trim inside your range. Replace if cracked, bent, or missing to maintain proper alignment.

Seals the gap between your range body and control panel to contain heat and prevent spills from entering internal components. Replace if heat escapes or moisture gets inside. Confirm fit by your model number.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

The Cooling Fan Sensor is an OEM replacement part for GE ovens and ranges. It is a critical component that monitors and regulates the operation of the cooling fan, ensuring proper ventilation and temperature control within the appliance.

Symptoms of a bad cooling fan sensor:

• Overheating issues, with the oven or range becoming excessively hot
• Failure of the cooling fan to turn on or operate correctly
• Error codes or warning lights related to temperature or ventilation problems
• Potential safety hazards due to inadequate cooling and heat buildup

Causes of a faulty cooling fan sensor can include exposure to high temperatures over time, electrical malfunctions, or physical damage to the sensor or its wiring.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ovens and ranges.

Range overheating or electronics failing? This tangential blower fan circulates air to cool internal components. DIY-friendly replacement part.