Parts for Ge JAS640RM3SS: Control Panel & Cooktop Parts

This is the glass cooktop assembly that covers and seals the cooking surface, providing a smooth, heat-resistant top for electric ranges. It restores a flat, stable surface for burners and makes cleaning easier. What it does:

• Replaces damaged, cracked, or chipped cooktop glass to restore a safe cooking surface
• Supports and aligns surface elements so burners sit correctly and heat evenly
• Seals the cooktop opening to help contain spills and simplify cleanup
• Helps prevent heat or glass fragments from exposing underlying components

• One range top and glass assembly

• Disconnect power to the range before starting any work; for gas ranges also shut off the gas supply
• Handle glass carefully and wear gloves; glass can break and cause injury
• Installation may require lifting and aligning the glass into clips or brackets—two people may be needed for safe handling
• Inspect surrounding seals and trim; replace damaged seals or fasteners as needed

This control knob fits onto the control stem so you can select settings with a simple turn. Replace a cracked, stripped, or missing knob to restore dependable control and a clean, finished look on your appliance.

• Attaches to the control shaft to adjust settings
• Provides a secure grip for smooth, accurate turning
• Common symptoms: cracked or broken knob, stripped insert, wobbly or missing knob, spins without engaging
• Restores proper feel and alignment of the control

• Disconnect power to the appliance and ensure all controls are off and cool before servicing
• Pull the old knob straight off the stem; do not twist or pry
• Align the new knob with the stem shape/flat, then press firmly until fully seated
• Do not force; recheck the part number and stem match

The GE electric range Knob Assembly is an OEM part for GE electric ranges. This knob assembly allows for easy selection and setting of oven temperature functions as well as proper functioning of the clock and timer. It provides control and convenience when cooking or baking. 

Causes of a bad knob assembly can include normal wear and tear over time from repeated use and handling. The knob assembly is subjected to high heat as well as constant adjusting which can cause degradation or failure of components. 

Symptoms of a bad knob assembly include:

• Knobs becoming loose, difficult to turn, or falling off completely
• Inaccurate temperature or time display 
• Functions like clock, timer, or oven failing to engage properly

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This manifold panel is the front trim piece that mounts over the gas valve/manifold on compatible gas ranges, restoring the cooktop's appearance and protecting internal components from spills and heat. It replaces worn, bent, or damaged panels. What it does:

• Covers and protects the gas manifold and valve access area from grease, spills, and heat.
• Restores a clean, finished look to the front of the cooktop after damage or corrosion.
• Provides the correct mounting surface for knobs and controls when applicable.
• Helps prevent debris from entering the manifold that can affect burner operation.

• One manifold panel

• Turn off and disconnect gas supply and electrical power before starting work.
• Remove grates and cooktop components as needed to access mounting screws; keep fasteners for reuse.
• Handle edges carefully—metal parts may be sharp.

This replacement indicator light lens covers the lamp opening on the control panel, protecting the opening while keeping the ON indicator easy to see. Replacing a cracked or missing lens restores visibility and a finished look.

• Covers and protects the indicator lamp opening in the panel
• Diffuses light so the appliance's ON status is easy to see
• Helps keep dust, grease, and moisture out of the control area
• Common signs to replace: lens cracked, missing, cloudy/discolored, or won't stay seated

• Disconnect power by unplugging the appliance or switching off the circuit breaker
• Access the panel area; release the old lens tabs or retainer from the back side and remove
• Align and press the new lens fully into the opening until it sits flush
• Restore power and verify the indicator illuminates correctly

This infinite switch controls the heat output of a stove's electric surface element, restoring precise temperature adjustment for cooking. It replaces a worn or failed burner control to regain variable heat settings. What it does:

• Regulates power to an electric cooktop surface element, allowing variable heat levels
• Replaces a faulty control that causes a burner to stay off, stay on, or not change heat settings
• Stops intermittent heating, no-click conditions, or elements that only run at full or low power
• Works with standard knob-style controls

• One infinite switch assembly

• Disconnect power at the breaker before starting any repair to avoid shock
• Remove the knob and console or back panel to access the switch; handle wiring gently
• Match the part number on the switch to your original before installing

This infinite switch is the variable control used to regulate heat on an electric range surface element. It restores adjustable burner heat so you can set and maintain the correct cooking temperature. What it does:

• Controls the power level to a surface heating element, allowing gradual heat adjustments rather than just on/off.
• Can cause symptoms such as a burner that won't heat, heat stuck at one setting, or inability to change element temperature.
• Replaces a failed or intermittently working control that may show no continuity when tested.
• Works with standard knob-operated rangetop elements.

• One infinite switch

• Disconnect power to the appliance at the breaker before starting any repair.
• Replacement typically requires removing the infinite switch from behind the control knob/console—keep track of wiring and clip locations.
• Use a multimeter to confirm the old switch is faulty before replacing.
• If replacing on a glass-ceramic cooktop, follow manufacturer guidance to avoid scratching or damaging the surface.

The Electric Thermostat is an OEM replacement part for GE ovens. This component is responsible for monitoring and regulating the temperature inside the oven. When you set a desired temperature, the electric thermostat ensures the oven heats to that specific temperature and maintains it throughout the cooking process.

Causes for a malfunctioning Electric Thermostat can include electrical issues, such as faulty wiring or connections, calibration problems, or wear and tear from regular use.

Symptoms of a bad Electric Thermostat include:

• Oven not reaching the set temperature
• Overheating or under-heating of the oven
• Inconsistent temperature fluctuations during cooking
• Error messages related to temperature or heating

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a replacement mounting screw for the refrigerator/freezer thermostat assembly. It secures the thermostat to the cabinet so temperature sensing and control remain stable and reliable. What it does:

• Secures the thermostat housing or bracket to the appliance cabinet
• Keeps the thermostat properly positioned for accurate temperature sensing
• Common fix when a loose, missing, or stripped thermostat fastener causes rattling or poor contact
• Small hardware part used during thermostat replacement or reassembly

• One thermostat mounting screw

• Turn off power to the appliance before starting any repair
• Use appropriate screwdriver and do not overtighten to avoid stripping the housing or threads
• If original hole or threads are damaged, inspect bracket or cabinet and replace as needed

This indicator light is a small panel-mounted lamp that illuminates to show when a heating circuit is active. Replacing a failed indicator restores a clear visual cue so you know when the appliance is operating. What it does

• Lights when the corresponding function or element is energized
• Provides a visual status cue during operation
• Common symptoms: light won't come on, stays on continuously, flickers or is dim, or shows physical damage

• One indicator light assembly

• Disconnect power at the breaker before servicing
• Access the rear of the console/control area; note wire positions and transfer one at a time
• Secure the new light in the panel opening per design (snap-in or nut-mounted)
• Restore power and test operation before reassembly

This pilot indicator light mounts in the control panel and illuminates to show when a surface element or another heating circuit is powered. Replace a burned-out or stuck-on light to restore a clear, reliable power-on warning.

• Lights when the corresponding heating circuit is energized
• Alerts users that heating components are active
• Common symptoms: light does not turn on, stays on constantly, flickers, or is very dim
• Shows physical damage to the lens or terminals when failed

• Disconnect power at the breaker before servicing
• Remove the backguard or control panel cover to access the indicator light from behind
• Note wire positions; move connectors to the new light one at a time and secure the light in the panel
• Restore power and test operation before reassembly

The Range Radiant Element is an OEM replacement part for GE ranges. This 5.5-inch element is situated beneath the glass surface of the electric stovetop. It's designed for tasks that require less surface area but still need quick and even heating, such as simmering sauces or cooking smaller portions of food.

Causes for a malfunctioning Range Radiant Element can include electrical issues like faulty wiring or connections, physical damage from spills or heavy cookware, or wear and tear from regular use.

Symptoms of a bad Range Radiant Element include:

• The element failing to heat up or heating unevenly
• Visible damage such as cracks or burns on the element
• Difficulty in maintaining a consistent temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This seal valve keeps the refrigerator water valve properly sealed to help prevent leaks and water damage. It restores a tight seal where the valve connects to the water line or manifold for reliable dispenser and icemaker operation. What it does:

• Replaces a worn or damaged valve seal to stop water leaks at the water valve connection.
• Helps restore proper water flow control to the dispenser and icemaker when leaks or drips occur.
• Commonly used when you notice water leaking beneath or behind the fridge, puddles under the valve area, or reduced dispenser/ice performance linked to a leak.
• Works as the sealing component between the water valve and its fittings or tubing.

• One seal valve (single replacement seal)

• Disconnect power and shut off the water supply before beginning repairs.
• The valve and fittings are dry, then remove the old seal and install the new seal in the correct orientation.
• Check all tubing and connectors for damage and replace if necessary to ensure a reliable seal.
• After installation, restore water and power, then test the dispenser/icemaker and inspect for leaks.

This backguard is the rear panel that fits behind the cooktop to protect the wall and enclose the range's control area. It restores the original look and shields wiring and components from heat and splatter. What it does:

• Covers and protects the rear of the range top and control area from spills, grease, and heat
• Conceals wiring and control connections for a clean appearance
• Restores a damaged, bent, or corroded backguard to improve safety and aesthetics
• Supports mounting for control components and trim where applicable

• Disconnect power to the range before beginning any service to avoid electrical shock
• Removal may require lifting the cooktop or removing control knobs and mounting screws; keep track of fasteners
• Handle carefully to avoid scratching the finish; use appropriate tools and have a second person if the panel is large

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This handle spacer positions the appliance handle at the correct distance from the door or panel for smooth operation. Replacing a worn or missing spacer restores proper standoff, alignment, and feel, and helps prevent rubbing, rattling, or looseness.

• Maintains proper spacing between the handle base and mounting surface
• Helps keep the handle aligned and secure
• Reduces rubbing or contact with the door/panel
• Common fix for a wobbly, misaligned, or scraping handle

• Unplug power and allow hot surfaces to cool before servicing
• Support the door/handle while removing mounting screws to prevent strain
• Note the spacer's position and orientation; reinstall the new spacer in the same location
• Tighten screws snugly; do not overtighten to avoid damage

The Radiant Element Spring is an OEM part for GE electric ranges. This spring supports the radiant element coil and provides the necessary tension to allow the coil to glow red-hot during the cooking process.

Causes of a bad spring can include fatigue from repeated heating and cooling cycles, damage due to impact or mishandling, or corrosion over extended use.

Symptoms of a bad radiant element spring include:

• Radiant element coil sagging or not sitting flush
• Element coil not heating properly or heating unevenly
• Excessive heat and energy use from a misaligned coil
• Element mounting brackets becoming loose over time

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.