Parts for Ge GGS600AV2DS: Control Panel Cooktop Parts

This vent trim is a replacement trim piece that restores the finished appearance around the vent opening and helps direct airflow from the appliance. It keeps the vent area neat and can replace damaged or missing trim for a clean look. What it does:

• Covers and finishes the vent opening to improve appearance and restore proper vent edge alignment
• Helps guide exhaust airflow from the appliance vent area
• Replaces cracked, chipped, warped or missing trim that exposes internal edges
• Reduces gaps where dust and debris can collect around the vent perimeter

• One vent trim piece

• Disconnect power to the appliance and allow all surfaces to cool before starting
• Typically installs with clips or screws—align trim over vent and fasten without forcing
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking

This upper vent trim is the OEM-style replacement trim piece that restores the finished look and directs exhaust from the appliance's upper vent area. It replaces a cracked, warped, or missing trim for a clean, secure fit. What it does:

• Covers and finishes the appliance's upper vent opening, maintaining proper airflow direction
• Restores appearance when original trim is cracked, scratched, or discolored
• Helps keep the vent opening sealed against debris and grease buildup
• Replaces damaged or loose trim that may rattle or not sit flush

• One upper vent trim (black)

• Install with appliance powered off; follow manufacturer's instructions for panel removal
• Use correct fasteners and avoid overtightening to prevent cracking the trim
• Check surrounding gasketing and vent components for damage while replacing

This is a replacement control knob designed to restore safe, reliable operation to a range or oven control. It provides a secure grip for turning the control shaft so you can select heat settings and burner positions. What it does:

• Replaces a cracked, stripped, or missing control knob so you can turn the control shaft easily
• Allows accurate selection of burner or oven settings by providing a clear tactile stop and pointer
• Resolves slipping or spinning knobs that prevent reliable temperature or burner selection
• Restores a finished look to the control panel when the original knob is worn or discolored

• Disconnect power to the appliance (unplug or shut off breaker) before installing.
• Ensure the control is in the OFF position and align the knob's splines with the control shaft; push straight on until fully seated.
• Do not force a knob onto a damaged or bent shaft; inspect the shaft and replace the valve or switch if necessary.

Replacement small burner cap for gas cooktop burners. Directs flame and protects burner head. Replace if cracked, chipped, or flame is uneven. Verify size and model compatibility before ordering.

This medium burner cap sits on a gas cooktop burner head to help shape and protect the flame for even cooking. It restores proper burner performance and keeps the burner assembly stable during use. What it does:

• Covers the burner head to direct and stabilize the gas flame
• Promotes more even heat distribution across cookware
• Helps prevent flame lifting and erratic flame patterns caused by a damaged or misaligned cap
• Protects the burner base from spills and debris that can affect ignition

• One medium burner cap (exact OEM part WB29X47157)

• Ensure the range is off and the cooktop is completely cool before handling
• Remove grates and lift off the old cap, then set the new cap into position over the burner head so it sits flat
• Check for a centered, even flame after installation; if flame issues persist, inspect the burner head and ignition components
• Replace cracked, warped, or heavily corroded caps rather than reusing them

This extra-large burner cap fits over a cooktop's large gas burner to help direct the flame for even heating and protect the burner base from spills and debris. It restores proper flame pattern and stable cooking performance. What it does:

• Shields the burner head and helps concentrate the flame for even heat on large cookware
• Helps maintain correct flame shape to improve ignition and reduce flickering
• Protects internal burner parts from food spills and corrosion
• Commonly replaced when cap is cracked, warped, heavily corroded, or no longer seats properly

• One extra-large burner cap

• Turn off gas supply and ensure cooktop is cool before servicing
• Lift off the old cap and seat the new cap flat on the burner head; no tools required for most installs
• Inspect burner head for debris and clean before installing to ensure proper fit and flame

Replace a range burner that won't heat or heats unevenly. This oval surface element restores consistent cooking zones for long pans and griddles.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

Replace a worn or damaged cooktop grate to restore stable, level support for pots and pans. Ensures even heating and safe cooking. Verify fit with your model.

Replacement griddle for gas and electric ranges. Installs on cooktop for grilling and cooking. Order a new griddle if yours is cracked, warped, or missing.

Black. 8-18 AB HXW 3/8

Mounting screw for gas cooktops. Secures components and panels during installation. Replace if stripped, missing, or damaged during service work.