Parts for Ge JGB920TEF2WW: 02 - Control Panel & Cooktop Parts

Color: White.

Color: White. Left hand side.

Color: White. Right hand side.

Color: White

This part is a replacement control board. It is made to replace a faulty or broken control board in some models of gas-powered ovens. This part ensures that the temperature of the oven is kept consistent, and the user can properly control the heat settings. If the control board is worn, broken, cracked, corroded, or otherwise unable to work properly, it should be replaced as soon as possible. It's critical that the oven is entirely disconnected from the power and gas sources before replacement or repairs are attempted. Always wear work gloves when attempting an appliance repair.This is a genuine OEM part that has been manufactured by General Electric and has been sourced directly from the manufacturer to ensure the highest quality. This control board can be used with gas-powered ovens that have been manufactured by General Electric, Hotpoint, and RCA. This is a genuine OEM part and thus is made of high-quality, durable materials and is sold individually.

Size: 8 - 18 ab hxw 5/8 s

Color: White. Mounting screw for end caps.

This mounting screw secures appliance components to the chassis for a tight, rattle-free fit. Replacing a missing, stripped, or corroded fastener helps keep panels, brackets, or burner assemblies properly aligned and secure.

• Fastens designated parts to the appliance frame or mounting points
• Helps maintain proper alignment of panels, trim, brackets, or burner assemblies
• Restores hold when the original screw is worn, rusted, or lost
• Symptoms include loose or wobbly components, rattling/vibration, or visible gaps

• Disconnect power; allow all surfaces to cool. For gas units, also shut off the gas supply.
• Use the correct driver/bit; avoid cross-threading.
• If mating threads or clip/nut are damaged, repair or replace them before installing.
• Tighten until secure; do not overtighten to prevent stripping.

The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently. 

Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time. 

Symptoms of a bad spark module include:

• Burners that will not ignite or only intermittently ignite 
• Flashback or burning above the burner head 
• The smell of gas when turning burners on

This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges. 

This replacement grate gog control fits atop the cooktop to secure and align the burner grate, restoring stable support for cookware and proper burner coverage. It helps maintain a level cooking surface and prevents grate movement during use. What it does:

• Replaces a worn, cracked, or missing control piece that allows the grate to seat correctly
• Stops grate wobble and shifting that can interfere with even heating or pot stability
• Restores correct spacing so burners operate without obstruction
• Useful when visual damage or loose fit is present

• One replacement grate gog control (gray)

• Designed for drop-in replacement; remove grate and seat new control in the same location
• Use care to avoid scratching the cooktop finish; gloves recommended
• Disconnect power to the appliance or ensure burners are cool before working near components

Approx 4 inches in diameter

Approx 1-1/2 inches in diameter

Approx 2-1/2 inches in diameter

Approx 3 inches in diameter

Approx 2 inches in diameter

Approx 2-3/4 inches in diameter

Approx 3-1/4 inches in diameter

Gray. Small. Used on the white model

Gray. Large. Used on the white model

This small cooktop gasket seals and cushions the edge of a stovetop glass or ceramic surface to help keep out spills and debris and reduce vibration. It restores a proper seal around the cooktop for safer, cleaner operation. What it does:

• Provides a protective seal between the cooktop and surrounding trim or countertop
• Cushions the cooktop edge to reduce glass-to-frame contact and rattling
• Helps prevent food, liquid and debris from entering gaps under the cooktop
• Can reduce moisture-related issues around the cooktop perimeter

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the cooktop or trim to access the gasket channel
• Clean and dry the mounting surface before installing the new gasket for best fit
• Press the gasket into place evenly; replace any retaining clips or hardware removed during disassembly

Approx 4-1/4 inches in diameter

Color: Grey

Package of 12

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold