Parts for Ge JGBP35GXH2WW: 02 - Control Panel & Cooktop Parts

Color: White. Right Hand side

White left-hand range end support cap. Replaces cracked, broken, or missing endcaps on electric and gas ranges. Installs on side panel edge.

Right hand side

Left hand side

If your oven won't shut off, buttons aren't responding, or temperature won't adjust, the control board may have failed. Takes about 20 minutes to replace.

Replace the upper back cover on your gas range. This housing panel protects internal components and completes the exterior finish. Order now if cracked or missing.

Replaces the lower back cover panel on your range. Install this protective housing if your original is cracked, broken, or missing. Secures to rear.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.

Color: White. Mounting screw for end caps.

Wire harness assembly for ranges. Routes power and control signals between the control board and heating elements. Replace if wires are damaged or frayed.

No clicking or spark when you turn burner knobs? This spark module sends high-voltage pulses to ignite gas burners. DIYers report 20-minute installs.

Gray burner grate for gas ranges. Replaces worn, chipped, or peeling grates. Sits on top of cooktop to support pots and pans. Sold individually.

Metal main top surface panel for gas ranges. Replaces cracked, chipped, or worn cooktop surfaces. Direct fit replacement for the stovetop cooking area.

Top support plate for gas ranges. Mounts beneath the cooktop surface to provide structural reinforcement. Replace if cracked, bent, or damaged.

Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.

Screw and washer assembly for securing cooktop and internal range components. Replace if missing, rusted, stripped, or damaged during appliance repair.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Replacement drip pan for gas ranges. Fits under burners to catch spills and prevent damage. Replace if cracked, warped, rusted, or discolored.

This right-side gray drip pan catches spills and protects your range cooktop. Replace your cracked, warped, or discolored pan to maintain a clean look.

This overlay is a genuine General Electric part, sold individually. This overlay can be used as a replacement part for a gas range. This overlay provides a selection menu for users to touch in order to interact with the oven, such as cooking time, bake, broil, self-clean, and oven light, among other buttons.This part might have to be replaced if it suffers damage to the point that the user of the appliance cannot rely on it to execute the functions by touch. Damage could manifest in the form of cracks, tears, scrapes, punctures, or erosion to the material of the overlay that prevents the screen from responding to the touch of the user. If this occurs, the overlay should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that will not require any special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This overlay is compatible with General Electric brand gas ranges.

Fix burners that won't light or click continuously. This igniter electrode sparks to light gas burners. Easy 5-10 minute repair with a screwdriver.

The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.

Symptoms of a bad igniter:

• Burners not lighting
• Igniter sparking erratically

The causes of a bad part can include physical damage or wear and tear over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.

• Holds the surface burner spark electrode firmly in position near the burner head
• Maintains correct alignment and gap so the igniter can spark to the burner
• Can help with delayed ignition, intermittent sparking, or a burner that won't light
• Typical signs include a loose/wobbly electrode, visible damage, or a missing clip

What's included: 1 mounting clip Install notes:

• Disconnect power and shut off gas before servicing
• Lift the cooktop or remove burner components to access the electrode; note clip orientation
• Transfer the electrode into the new clip and seat the clip securely in its bracket or base
• Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.