Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Black left-hand endcap for electric and gas ranges. Replaces cracked, broken, or missing endcaps on the side of your range for a complete finished look.
Black plastic endcap for the right side of your range control panel. Replace this cosmetic trim piece if it's cracked, broken, or missing.
Right hand side
Usually ships within 4 - 14 days
Left hand side
This is an oven control board. It allows the user to control the main functions of the oven. When the control panel on an oven malfunctions, the user is unable to control oven functions through the control panel. This issue is usually followed by the backlight on the clock and timer display going out once the control panel breaks down completely. Using a voltage tester can verify whether the control panel is the root of the problem. Unplug the oven from its main power source and slide out from the wall. Remove the screws that hold the rear panel in place and slide the rear panel to the side. This will allow immediate access to the control board. Unplug the control board from its wire harness, then remove the anchoring screws holding it in place. Remove the control board from the control panel. If the faceplate is not damaged, it can be salvaged by carefully prying it off with a razor blade. Repeat these steps in reverse to install the new component.This genuine OEM replacement oven control board is sourced directly from GE. The control board is only available individually and is not included with other parts or the original appliance. This part is compatible with GE ovens.
Replace the upper back cover on your gas range. This housing panel protects internal components and completes the exterior finish. Order now if cracked or missing.
Replaces the lower back cover panel on your range. Install this protective housing if your original is cracked, broken, or missing. Secures to rear.
Wiring harness module for ranges. Routes power between control board and internal components. Replace if wires are damaged, frayed, or connectors broken.
No clicking or spark when you turn burner knobs? This spark module sends high-voltage pulses to ignite gas burners. DIYers report 20-minute installs.
Color: Black. Dual.
Top support plate for gas ranges. Mounts beneath the cooktop surface to provide structural reinforcement. Replace if cracked, bent, or damaged.
Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.
Screw and washer assembly for securing cooktop and internal range components. Replace if missing, rusted, stripped, or damaged during appliance repair.
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Cooktop mounting screw secures the cooktop to frame or brackets. Replace if stripped, missing, or rusty to eliminate wobble, rattling, or lifted corners.
The Left Side Double Burner Pan is an OEM replacement part specific to GE gas ranges. This pan sits beneath two burners on the left side of the cooktop to catch and contain flame emissions and spills. The burner pan is prone to warping or damage over many heating and cooling cycles. Causes of a bad burner pan include prolonged exposure to intense burner heat as well as accidental damage from cleaning implements or cookware. Symptoms of a bad left-side double burner pan include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replace cracked, stained, or worn drip pans that sit beneath burner elements. Catches spills and crumbs during cooking. Easy cosmetic upgrade.
Black burner cap sits on top of your gas range burner head. Replace if cracked, chipped, stained, or missing to restore your cooktop's appearance.
Black burner cap sits atop the burner head on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore appearance.
Black burner cap for gas range cooktops. Replaces cracked, stained, warped, or missing caps. Sits atop burner base for proper flame distribution.
The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.
Symptoms of a bad igniter:
The causes of a bad part can include physical damage or wear and tear over time.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.
Replace your cracked, warped, or missing medium surface burner. Ensures even heat distribution for cooking tasks. Installs on gas range cooktops.
Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.
Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.
Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Insulation shield that installs behind the range control panel. Protects control board and wiring from oven heat. Replace if cracked, damaged, or missing.
Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.